| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d4d43765-227a-733e-f772-efa4edf89518@st.com>
Date: Tue, 2 Jul 2019 15:18:55 +0000
From: Hugues FRUCHET <hugues.fruchet@...com>
To: Hans Verkuil <hverkuil@...all.nl>,
Alexandre TORGUE <alexandre.torgue@...com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
"Sakari Ailus" <sakari.ailus@...ux.intel.com>
CC: "linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-stm32@...md-mailman.stormreply.com"
<linux-stm32@...md-mailman.stormreply.com>,
Benjamin Gaignard <benjamin.gaignard@...aro.org>,
Yannick FERTRE <yannick.fertre@...com>,
Philippe CORNU <philippe.cornu@...com>,
Mickael GUENE <mickael.guene@...com>
Subject: Re: [PATCH v2 2/3] media: stm32-dcmi: add media controller support
Hi Hans,
On 6/20/19 2:01 PM, Hans Verkuil wrote:
> On 6/11/19 10:48 AM, Hugues Fruchet wrote:
>> Add media controller support to dcmi.
>>
>> Signed-off-by: Hugues Fruchet <hugues.fruchet@...com>
>> ---
>> drivers/media/platform/Kconfig | 2 +-
>> drivers/media/platform/stm32/stm32-dcmi.c | 83 +++++++++++++++++++++++--------
>> 2 files changed, 63 insertions(+), 22 deletions(-)
>>
>> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
>> index 8a19654..de7e21f 100644
>> --- a/drivers/media/platform/Kconfig
>> +++ b/drivers/media/platform/Kconfig
>> @@ -121,7 +121,7 @@ config VIDEO_S3C_CAMIF
>>
>> config VIDEO_STM32_DCMI
>> tristate "STM32 Digital Camera Memory Interface (DCMI) support"
>> - depends on VIDEO_V4L2 && OF
>> + depends on VIDEO_V4L2 && OF && MEDIA_CONTROLLER
>> depends on ARCH_STM32 || COMPILE_TEST
>> select VIDEOBUF2_DMA_CONTIG
>> select V4L2_FWNODE
>> diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
>> index 7a4d559..3a69783 100644
>> --- a/drivers/media/platform/stm32/stm32-dcmi.c
>> +++ b/drivers/media/platform/stm32/stm32-dcmi.c
>> @@ -170,6 +170,9 @@ struct stm32_dcmi {
>>
>> /* Ensure DMA operations atomicity */
>> struct mutex dma_lock;
>> +
>> + struct media_device mdev;
>> + struct media_pad vid_cap_pad;
>> };
>>
>> static inline struct stm32_dcmi *notifier_to_dcmi(struct v4l2_async_notifier *n)
>> @@ -1545,21 +1548,12 @@ static int dcmi_graph_notify_complete(struct v4l2_async_notifier *notifier)
>> dev_err(dcmi->dev, "Could not get sensor bounds\n");
>> return ret;
>> }
>> -
>> ret = dcmi_set_default_fmt(dcmi);
>> if (ret) {
>> dev_err(dcmi->dev, "Could not set default format\n");
>> return ret;
>> }
>>
>> - ret = video_register_device(dcmi->vdev, VFL_TYPE_GRABBER, -1);
>> - if (ret) {
>> - dev_err(dcmi->dev, "Failed to register video device\n");
>> - return ret;
>> - }
>
> Why was this moved to probe()? Off-hand I see no reason for that.
>
> Regards,
>
> Hans
>
I need to do that otherwise the dcmi_graph_notify_bound() subdevice pad
link code crashes:
+ /*
+ * Link this sub-device to DCMI, it could be
+ * a parallel camera sensor or a bridge
+ */
+ src_pad = media_entity_get_fwnode_pad(&subdev->entity,
+ subdev->fwnode,
+ MEDIA_PAD_FL_SOURCE);
+
+ ret = media_create_pad_link(&subdev->entity, src_pad,
+ &dcmi->vdev->entity, 0,
+ MEDIA_LNK_FL_IMMUTABLE |
+ MEDIA_LNK_FL_ENABLED);
see https://www.spinics.net/lists/linux-media/msg153120.html.
>> -
>> - dev_dbg(dcmi->dev, "Device registered as %s\n",
>> - video_device_node_name(dcmi->vdev));
>> return 0;
>> }
>>
>> @@ -1648,6 +1642,12 @@ static int dcmi_graph_init(struct stm32_dcmi *dcmi)
>> return 0;
>> }
>>
>> +static void dcmi_graph_deinit(struct stm32_dcmi *dcmi)
>> +{
>> + v4l2_async_notifier_unregister(&dcmi->notifier);
>> + v4l2_async_notifier_cleanup(&dcmi->notifier);
>> +}
>> +
>> static int dcmi_probe(struct platform_device *pdev)
>> {
>> struct device_node *np = pdev->dev.of_node;
>> @@ -1752,10 +1752,27 @@ static int dcmi_probe(struct platform_device *pdev)
>>
>> q = &dcmi->queue;
>>
>> + dcmi->v4l2_dev.mdev = &dcmi->mdev;
>> +
>> + /* Initialize media device */
>> + strscpy(dcmi->mdev.model, DRV_NAME, sizeof(dcmi->mdev.model));
>> + snprintf(dcmi->mdev.bus_info, sizeof(dcmi->mdev.bus_info),
>> + "platform:%s", DRV_NAME);
>> + dcmi->mdev.dev = &pdev->dev;
>> + media_device_init(&dcmi->mdev);
>> +
>> + /* Register the media device */
>> + ret = media_device_register(&dcmi->mdev);
>> + if (ret) {
>> + dev_err(dcmi->dev, "Failed to register media device (%d)\n",
>> + ret);
>> + goto err_media_device_cleanup;
>> + }
>> +
>> /* Initialize the top-level structure */
>> ret = v4l2_device_register(&pdev->dev, &dcmi->v4l2_dev);
>> if (ret)
>> - goto err_dma_release;
>> + goto err_media_device_unregister;
>>
>> dcmi->vdev = video_device_alloc();
>> if (!dcmi->vdev) {
>> @@ -1775,6 +1792,25 @@ static int dcmi_probe(struct platform_device *pdev)
>> V4L2_CAP_READWRITE;
>> video_set_drvdata(dcmi->vdev, dcmi);
>>
>> + /* Media entity pads */
>> + dcmi->vid_cap_pad.flags = MEDIA_PAD_FL_SINK;
>> + ret = media_entity_pads_init(&dcmi->vdev->entity,
>> + 1, &dcmi->vid_cap_pad);
>> + if (ret) {
>> + dev_err(dcmi->dev, "Failed to init media entity pad\n");
>> + goto err_device_unregister;
>> + }
>> + dcmi->vdev->entity.flags |= MEDIA_ENT_FL_DEFAULT;
>> +
>> + ret = video_register_device(dcmi->vdev, VFL_TYPE_GRABBER, -1);
>> + if (ret) {
>> + dev_err(dcmi->dev, "Failed to register video device\n");
>> + goto err_media_entity_cleanup;
>> + }
>> +
>> + dev_dbg(dcmi->dev, "Device registered as %s\n",
>> + video_device_node_name(dcmi->vdev));
>> +
>> /* Buffer queue */
>> q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>> q->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF;
>> @@ -1790,18 +1826,18 @@ static int dcmi_probe(struct platform_device *pdev)
>> ret = vb2_queue_init(q);
>> if (ret < 0) {
>> dev_err(&pdev->dev, "Failed to initialize vb2 queue\n");
>> - goto err_device_release;
>> + goto err_media_entity_cleanup;
>> }
>>
>> ret = dcmi_graph_init(dcmi);
>> if (ret < 0)
>> - goto err_device_release;
>> + goto err_media_entity_cleanup;
>>
>> /* Reset device */
>> ret = reset_control_assert(dcmi->rstc);
>> if (ret) {
>> dev_err(&pdev->dev, "Failed to assert the reset line\n");
>> - goto err_cleanup;
>> + goto err_graph_deinit;
>> }
>>
>> usleep_range(3000, 5000);
>> @@ -1809,7 +1845,7 @@ static int dcmi_probe(struct platform_device *pdev)
>> ret = reset_control_deassert(dcmi->rstc);
>> if (ret) {
>> dev_err(&pdev->dev, "Failed to deassert the reset line\n");
>> - goto err_cleanup;
>> + goto err_graph_deinit;
>> }
>>
>> dev_info(&pdev->dev, "Probe done\n");
>> @@ -1820,13 +1856,16 @@ static int dcmi_probe(struct platform_device *pdev)
>>
>> return 0;
>>
>> -err_cleanup:
>> - v4l2_async_notifier_cleanup(&dcmi->notifier);
>> -err_device_release:
>> - video_device_release(dcmi->vdev);
>> +err_graph_deinit:
>> + dcmi_graph_deinit(dcmi);
>> +err_media_entity_cleanup:
>> + media_entity_cleanup(&dcmi->vdev->entity);
>> err_device_unregister:
>> v4l2_device_unregister(&dcmi->v4l2_dev);
>> -err_dma_release:
>> +err_media_device_unregister:
>> + media_device_unregister(&dcmi->mdev);
>> +err_media_device_cleanup:
>> + media_device_cleanup(&dcmi->mdev);
>> dma_release_channel(dcmi->dma_chan);
>>
>> return ret;
>> @@ -1838,9 +1877,11 @@ static int dcmi_remove(struct platform_device *pdev)
>>
>> pm_runtime_disable(&pdev->dev);
>>
>> - v4l2_async_notifier_unregister(&dcmi->notifier);
>> - v4l2_async_notifier_cleanup(&dcmi->notifier);
>> + dcmi_graph_deinit(dcmi);
>> + media_entity_cleanup(&dcmi->vdev->entity);
>> v4l2_device_unregister(&dcmi->v4l2_dev);
>> + media_device_unregister(&dcmi->mdev);
>> + media_device_cleanup(&dcmi->mdev);
>>
>> dma_release_channel(dcmi->dma_chan);
>>
>>
>
BR,
Hugues.
Powered by blists - more mailing lists