lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190703091048.1962-1-paweldembicki@gmail.com>
Date:   Wed,  3 Jul 2019 11:10:48 +0200
From:   Pawel Dembicki <paweldembicki@...il.com>
To:     unlisted-recipients:; (no To-header on input)
Cc:     paweldembicki@...il.com, linus.walleij@...aro.org,
        Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 4/4] net: dsa: vsc73xx: Assert reset if iCPU is enabled

Driver allow to use devices with disabled iCPU only.

Some devices have pre-initialised iCPU by bootloader.
That state make switch unmanaged. This patch force reset
if device is in unmanaged state. In the result chip lost
internal firmware from RAM and it can be managed.

Signed-off-by: Pawel Dembicki <paweldembicki@...il.com>
---
Changes in v2:
- rebase commit after changes 1-3/4 patches

 drivers/net/dsa/vitesse-vsc73xx-core.c | 36 ++++++++++++--------------
 1 file changed, 17 insertions(+), 19 deletions(-)

diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index 10063f31d9a3..4525702faf68 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -417,22 +417,8 @@ static int vsc73xx_detect(struct vsc73xx *vsc)
 	}
 
 	if (val == 0xffffffff) {
-		dev_info(vsc->dev, "chip seems dead, assert reset\n");
-		gpiod_set_value_cansleep(vsc->reset, 1);
-		/* Reset pulse should be 20ns minimum, according to datasheet
-		 * table 245, so 10us should be fine
-		 */
-		usleep_range(10, 100);
-		gpiod_set_value_cansleep(vsc->reset, 0);
-		/* Wait 20ms according to datasheet table 245 */
-		msleep(20);
-
-		ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
-				   VSC73XX_ICPU_MBOX_VAL, &val);
-		if (val == 0xffffffff) {
-			dev_err(vsc->dev, "seems not to help, giving up\n");
-			return -ENODEV;
-		}
+		dev_info(vsc->dev, "chip seems dead.\n");
+		return -EAGAIN;
 	}
 
 	ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
@@ -483,9 +469,8 @@ static int vsc73xx_detect(struct vsc73xx *vsc)
 	}
 	if (icpu_si_boot_en && !icpu_pi_en) {
 		dev_err(vsc->dev,
-			"iCPU enabled boots from SI, no external memory\n");
-		dev_err(vsc->dev, "no idea how to deal with this\n");
-		return -ENODEV;
+			"iCPU enabled boots from PI/SI, no external memory\n");
+		return -EAGAIN;
 	}
 	if (!icpu_si_boot_en && icpu_pi_en) {
 		dev_err(vsc->dev,
@@ -1158,6 +1143,19 @@ int vsc73xx_probe(struct vsc73xx *vsc)
 		msleep(20);
 
 	ret = vsc73xx_detect(vsc);
+	if (ret == -EAGAIN) {
+		dev_err(vsc->dev,
+			"Chip seams to be out of control. Assert reset and try again.\n");
+		gpiod_set_value_cansleep(vsc->reset, 1);
+		/* Reset pulse should be 20ns minimum, according to datasheet
+		 * table 245, so 10us should be fine
+		 */
+		usleep_range(10, 100);
+		gpiod_set_value_cansleep(vsc->reset, 0);
+		/* Wait 20ms according to datasheet table 245 */
+		msleep(20);
+		ret = vsc73xx_detect(vsc);
+	}
 	if (ret) {
 		dev_err(dev, "no chip found (%d)\n", ret);
 		return -ENODEV;
-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ