| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1562234589.19751.16.camel@mhfsdcap03>
Date: Thu, 4 Jul 2019 18:03:09 +0800
From: Ran Bi <ran.bi@...iatek.com>
To: Frank Wunderlich <frank-w@...lic-files.de>
CC: Lee Jones <lee.jones@...aro.org>, Rob Herring <robh+dt@...nel.org>,
"Mark Rutland" <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
Sean Wang <sean.wang@...iatek.com>,
Sebastian Reichel <sre@...nel.org>,
Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-pm@...r.kernel.org>,
<linux-rtc@...r.kernel.org>,
Eddie Huang <eddie.huang@...iatek.com>,
"Thomas Gleixner" <tglx@...utronix.de>,
Richard Fontana <rfontana@...hat.com>,
Allison Randal <allison@...utok.net>,
"David S . Miller" <davem@...emloft.net>,
Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
"Paul E . McKenney" <paulmck@...ux.ibm.com>,
Josef Friedl <josef.friedl@...ed.at>,
Yingjoe Chen <yingjoe.chen@...iatek.com>,
Sean Wang <sean.wang@...iatek.com>,
Ran Bi <ran.bi@...iatek.com>
Subject: Re: [PATCH v2 5/7] power: reset: add driver for mt6323 poweroff
On Wed, 2019-07-03 at 18:48 +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@...ed.at>
>
> Suggested-by: Frank Wunderlich <frank-w@...lic-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@...ed.at>
> Signed-off-by: Frank Wunderlich <frank-w@...lic-files.de>
> ---
> drivers/power/reset/Kconfig | 10 +++
> drivers/power/reset/Makefile | 1 +
> drivers/power/reset/mt6323-poweroff.c | 97 +++++++++++++++++++++++++++
> include/linux/mfd/mt6397/core.h | 2 +
> 4 files changed, 110 insertions(+)
> create mode 100644 drivers/power/reset/mt6323-poweroff.c
>
> --
> 2.17.1
>
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index 980951dff834..492678e22088 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -140,6 +140,16 @@ config POWER_RESET_LTC2952
> This driver supports an external powerdown trigger and board power
> down via the LTC2952. Bindings are made in the device tree.
>
> +config POWER_RESET_MT6323
> + bool "MediaTek MT6323 power-off driver"
> + depends on MFD_MT6397
> + help
> + The power-off driver is responsible for externally shutdown down
> + the power of a remote MediaTek SoC MT6323 is connected to through
> + controlling a tiny circuit BBPU inside MT6323 RTC.
> +
> + Say Y if you have a board where MT6323 could be found.
> +
> config POWER_RESET_QNAP
> bool "QNAP power-off driver"
> depends on OF_GPIO && PLAT_ORION
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index 0aebee954ac1..94eaceb01d66 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
> obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
> obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
> obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
> +obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
> obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
> obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
> obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
> diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c
> new file mode 100644
> index 000000000000..1caf43d9e46d
> --- /dev/null
> +++ b/drivers/power/reset/mt6323-poweroff.c
> @@ -0,0 +1,97 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Power off through MediaTek PMIC
> + *
> + * Copyright (C) 2018 MediaTek Inc.
> + *
> + * Author: Sean Wang <sean.wang@...iatek.com>
> + *
> + */
> +
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/mfd/mt6397/core.h>
> +#include <linux/mfd/mt6397/rtc.h>
> +
> +struct mt6323_pwrc {
> + struct device *dev;
> + struct regmap *regmap;
> + u32 base;
> +};
> +
> +static struct mt6323_pwrc *mt_pwrc;
> +
> +static void mt6323_do_pwroff(void)
> +{
> + struct mt6323_pwrc *pwrc = mt_pwrc;
> + unsigned int val;
> + int ret;
> +
> + regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY);
> + regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1);
> +
> + ret = regmap_read_poll_timeout(pwrc->regmap,
> + pwrc->base + RTC_BBPU, val,
> + !(val & RTC_BBPU_CBUSY),
> + MTK_RTC_POLL_DELAY_US,
> + MTK_RTC_POLL_TIMEOUT);
> + if (ret)
> + dev_err(pwrc->dev, "failed to write BBPU: %d\n", ret);
> +
> + /* Wait some time until system down, otherwise, notice with a warn */
> + mdelay(1000);
> +
> + WARN_ONCE(1, "Unable to power off system\n");
> +}
> +
> +static int mt6323_pwrc_probe(struct platform_device *pdev)
> +{
> + struct mt6397_chip *mt6397_chip = dev_get_drvdata(pdev->dev.parent);
> + struct mt6323_pwrc *pwrc;
> + struct resource *res;
> +
> + pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
> + if (!pwrc)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + pwrc->base = res->start;
> + pwrc->regmap = mt6397_chip->regmap;
> + pwrc->dev = &pdev->dev;
> + mt_pwrc = pwrc;
> +
> + pm_power_off = &mt6323_do_pwroff;
We had implement MT8173 poweroff function in arm-trusted-firmware's PSCI
plat_system_off() function. MT8173 SoC is using PMIC MT6397. (Ref:
https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/mediatek/mt8173/plat_pm.c and https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/mediatek/mt8173/drivers/rtc) Do you think it's better to implement poweroff function into arm-trusted-firmware compared to hijack pm_poweroff() function in Kernel? Right now, we are doing the upstream of other PMIC chip like MT6358's poweroff function in arm-trusted-firmware too.
> +
> + return 0;
> +}
> +
> +static int mt6323_pwrc_remove(struct platform_device *pdev)
> +{
> + if (pm_power_off == &mt6323_do_pwroff)
> + pm_power_off = NULL;
> +
> + return 0;
> +}
> +
> +static const struct of_device_id mt6323_pwrc_dt_match[] = {
> + { .compatible = "mediatek,mt6323-pwrc" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, mt6323_pwrc_dt_match);
> +
> +static struct platform_driver mt6323_pwrc_driver = {
> + .probe = mt6323_pwrc_probe,
> + .remove = mt6323_pwrc_remove,
> + .driver = {
> + .name = "mt6323-pwrc",
> + .of_match_table = mt6323_pwrc_dt_match,
> + },
> +};
> +
> +module_platform_driver(mt6323_pwrc_driver);
> +
> +MODULE_DESCRIPTION("Poweroff driver for MT6323 PMIC");
> +MODULE_AUTHOR("Sean Wang <sean.wang@...iatek.com>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h
> index 25a95e72179b..652da61e3711 100644
> --- a/include/linux/mfd/mt6397/core.h
> +++ b/include/linux/mfd/mt6397/core.h
> @@ -7,6 +7,8 @@
> #ifndef __MFD_MT6397_CORE_H__
> #define __MFD_MT6397_CORE_H__
>
> +#include <linux/mutex.h>
> +
> enum mt6397_irq_numbers {
> MT6397_IRQ_SPKL_AB = 0,
Powered by blists - more mailing lists