linux-kernel - [PATCH 3/5] arm64: dts: bitmain: Source common clock for UART controllers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri,  5 Jul 2019 20:44:38 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To:     sboyd@...nel.org, mturquette@...libre.com, robh+dt@...nel.org
Cc:     linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        haitao.suo@...main.com, darren.tsao@...main.com,
        fisher.cheng@...main.com, alec.lin@...main.com,
        Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH 3/5] arm64: dts: bitmain: Source common clock for UART controllers

Remove fixed clock and source common clock for UART controllers.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
 arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts |  9 ---------
 arch/arm64/boot/dts/bitmain/bm1880.dtsi            | 12 ++++++++++++
 2 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
index 3e8c70778e24..7a2c7f9c2660 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
+++ b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
@@ -49,12 +49,6 @@
 		reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB
 	};
 
-	uart_clk: uart-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <500000000>;
-		#clock-cells = <0>;
-	};
-
 	soc {
 		gpio0: gpio@...27000 {
 			porta: gpio-controller@0 {
@@ -173,21 +167,18 @@
 
 &uart0 {
 	status = "okay";
-	clocks = <&uart_clk>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart0_default>;
 };
 
 &uart1 {
 	status = "okay";
-	clocks = <&uart_clk>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1_default>;
 };
 
 &uart2 {
 	status = "okay";
-	clocks = <&uart_clk>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2_default>;
 };
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index d2edb2e28bf2..408b76087762 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -172,6 +172,9 @@
 		uart0: serial@...18000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x58018000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -182,6 +185,9 @@
 		uart1: serial@...1A000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801a000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -192,6 +198,9 @@
 		uart2: serial@...1C000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801c000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -202,6 +211,9 @@
 		uart3: serial@...1E000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x5801e000 0x0 0x2000>;
+			clocks = <&clk BM1880_CLK_UART_500M>,
+				 <&clk BM1880_CLK_APB_UART>;
+			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-- 
2.17.1