lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190708035243.12170-4-s-anna@ti.com>
Date:   Sun, 7 Jul 2019 22:52:40 -0500
From:   Suman Anna <s-anna@...com>
To:     Marc Zyngier <marc.zyngier@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Thomas Gleixner <tglx@...utronix.de>,
        Jason Cooper <jason@...edaemon.net>
CC:     Tony Lindgren <tony@...mide.com>, "Andrew F. Davis" <afd@...com>,
        Roger Quadros <rogerq@...com>,
        Lokesh Vutla <lokeshvutla@...com>,
        Grygorii Strashko <grygorii.strashko@...com>,
        Sekhar Nori <nsekhar@...com>,
        David Lechner <david@...hnology.com>,
        Murali Karicheri <m-karicheri2@...com>,
        <devicetree@...r.kernel.org>, <linux-omap@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, Suman Anna <s-anna@...com>
Subject: [PATCH 3/6] irqchip/irq-pruss-intc: Add support for shared and invalid interrupts

The PRUSS INTC has a fixed number of output interrupt lines that are
connected to a number of processors or other PRUSS instances or other
devices (like DMA) on the SoC. The output interrupt lines 2 through 9
are usually connected to the main ARM host processor and are referred
to as host interrupts 0 through 7 from ARM/MPU perspective.

All of these 8 host interrupts are not always exclusively connected
to the ARM GIC. Some SoCs have some interrupt lines not connected to
the ARM GIC at all, while a few others have the interrupt lines
connected to multiple processors in which they need to be partitioned
as per SoC integration needs. For example, AM437x and 66AK2G SoCs have
2 PRUSS instances each and have the host interrupt 5 connected to the
other PRUSS, while AM335x has host interrupt 0 shared between MPU and
TSC_ADC and host interrupts 6 & 7 shared between MPU and a DMA controller.

Add support to the PRUSS INTC driver to allow both these shared and
invalid interrupts by not returning a failure if any of these interrupts
are skipped from the corresponding INTC DT node.

Signed-off-by: Suman Anna <s-anna@...com>
---
 drivers/irqchip/irq-pruss-intc.c | 44 +++++++++++++++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-pruss-intc.c b/drivers/irqchip/irq-pruss-intc.c
index d62186ad1be4..142d01b434e0 100644
--- a/drivers/irqchip/irq-pruss-intc.c
+++ b/drivers/irqchip/irq-pruss-intc.c
@@ -68,6 +68,8 @@
  * @domain: irq domain for this interrupt controller
  * @lock: mutex to serialize access to INTC
  * @host_mask: indicate which HOST IRQs are enabled
+ * @shared_intr: bit-map denoting if the MPU host interrupt is shared
+ * @invalid_intr: bit-map denoting if host interrupt is connected to MPU
  */
 struct pruss_intc {
 	unsigned int irqs[MAX_NUM_HOST_IRQS];
@@ -76,6 +78,8 @@ struct pruss_intc {
 	struct irq_domain *domain;
 	struct mutex lock; /* PRUSS INTC lock */
 	u32 host_mask;
+	u16 shared_intr;
+	u16 invalid_intr;
 };
 
 static inline u32 pruss_intc_read_reg(struct pruss_intc *intc, unsigned int reg)
@@ -243,7 +247,8 @@ static int pruss_intc_probe(struct platform_device *pdev)
 	struct pruss_intc *intc;
 	struct resource *res;
 	struct irq_chip *irqchip;
-	int i, irq;
+	int i, irq, count;
+	u8 temp_intr[MAX_NUM_HOST_IRQS] = { 0 };
 
 	intc = devm_kzalloc(dev, sizeof(*intc), GFP_KERNEL);
 	if (!intc)
@@ -260,6 +265,39 @@ static int pruss_intc_probe(struct platform_device *pdev)
 	dev_dbg(dev, "intc memory: pa %pa size 0x%zx va %pK\n", &res->start,
 		(size_t)resource_size(res), intc->base);
 
+	count = of_property_read_variable_u8_array(dev->of_node,
+						   "ti,irqs-reserved",
+						   temp_intr, 0,
+						   MAX_NUM_HOST_IRQS);
+	if (count < 0 && count != -EINVAL)
+		return count;
+	count = (count == -EINVAL ? 0 : count);
+	for (i = 0; i < count; i++) {
+		if (temp_intr[i] < MAX_NUM_HOST_IRQS) {
+			intc->invalid_intr |= BIT(temp_intr[i]);
+		} else {
+			dev_warn(dev, "ignoring invalid reserved irq %d\n",
+				 temp_intr[i]);
+		}
+		temp_intr[i] = 0;
+	}
+
+	count = of_property_read_variable_u8_array(dev->of_node,
+						   "ti,irqs-shared",
+						   temp_intr, 0,
+						   MAX_NUM_HOST_IRQS);
+	if (count < 0 && count != -EINVAL)
+		return count;
+	count = (count == -EINVAL ? 0 : count);
+	for (i = 0; i < count; i++) {
+		if (temp_intr[i] < MAX_NUM_HOST_IRQS) {
+			intc->shared_intr |= BIT(temp_intr[i]);
+		} else {
+			dev_warn(dev, "ignoring invalid reserved irq %d\n",
+				 temp_intr[i]);
+		}
+	}
+
 	mutex_init(&intc->lock);
 
 	pruss_intc_init(intc);
@@ -286,6 +324,10 @@ static int pruss_intc_probe(struct platform_device *pdev)
 	for (i = 0; i < MAX_NUM_HOST_IRQS; i++) {
 		irq = platform_get_irq_byname(pdev, irq_names[i]);
 		if (irq < 0) {
+			if (intc->shared_intr & BIT(i) ||
+			    intc->invalid_intr & BIT(i))
+				continue;
+
 			dev_err(dev->parent, "platform_get_irq_byname failed for %s : %d\n",
 				irq_names[i], irq);
 			goto fail_irq;
-- 
2.22.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ