linux-kernel - [PATCH v2 06/10] net: hisilicon: dt-bindings: Add an field of port-handle

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1562643071-46811-7-git-send-email-xiaojiangfeng@huawei.com>
Date:   Tue, 9 Jul 2019 11:31:07 +0800
From:   Jiangfeng Xiao <xiaojiangfeng@...wei.com>
To:     <davem@...emloft.net>, <robh+dt@...nel.org>,
        <yisen.zhuang@...wei.com>, <salil.mehta@...wei.com>,
        <mark.rutland@....com>, <dingtianhong@...wei.com>,
        <xiaojiangfeng@...wei.com>
CC:     <netdev@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <leeyou.li@...wei.com>,
        <nixiaoming@...wei.com>, <jianping.liu@...wei.com>,
        <xiekunxun@...wei.com>
Subject: [PATCH v2 06/10] net: hisilicon: dt-bindings: Add an field of port-handle

In general, group is the same as the port, but some
boards specify a special group for better load
balancing of each processing unit.

Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@...wei.com>
---
 Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
index d1df8a0..464c0da 100644
--- a/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
+++ b/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt
@@ -10,6 +10,7 @@ Required properties:
 	phandle, specifies a reference to the syscon ppe node
 	port, port number connected to the controller
 	channel, recv channel start from channel * number (RX_DESC_NUM)
+	group, field in the pkg desc, in general, it is the same as the port.
 - phy-mode: see ethernet.txt [1].
 
 Optional properties:
@@ -66,7 +67,7 @@ Example:
 		reg = <0x28b0000 0x10000>;
 		interrupts = <0 413 4>;
 		phy-mode = "mii";
-		port-handle = <&ppe 31 0>;
+		port-handle = <&ppe 31 0 31>;
 	};
 
 	ge0: ethernet@...0000 {
@@ -74,7 +75,7 @@ Example:
 		reg = <0x2800000 0x10000>;
 		interrupts = <0 402 4>;
 		phy-mode = "sgmii";
-		port-handle = <&ppe 0 1>;
+		port-handle = <&ppe 0 1 0>;
 		phy-handle = <&phy0>;
 	};
 
@@ -83,6 +84,6 @@ Example:
 		reg = <0x2880000 0x10000>;
 		interrupts = <0 410 4>;
 		phy-mode = "sgmii";
-		port-handle = <&ppe 8 2>;
+		port-handle = <&ppe 8 2 8>;
 		phy-handle = <&phy1>;
 	};
-- 
1.8.5.6