linux-kernel - [PATCH 05/10] ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1562656767-273566-6-git-send-email-s.riedmueller@phytec.de>
Date:   Tue, 9 Jul 2019 09:19:22 +0200
From:   Stefan Riedmueller <s.riedmueller@...tec.de>
To:     shawnguo@...nel.org, s.hauer@...gutronix.de, robh+dt@...nel.org,
        mark.rutland@....com
Cc:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, martyn.welch@...labora.com,
        kernel@...gutronix.de, festevam@...il.com, linux-imx@....com
Subject: [PATCH 05/10] ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts

To disable Ethernet interfaces in case they are not populated
make the FEC and Ethernet PHY status configurable in the dts files.

Also change the Ethernet PHYs labels to make them correspond to
the MDIO address.

Signed-off-by: Stefan Riedmueller <s.riedmueller@...tec.de>
---
 arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi      |  7 ++++---
 arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts | 12 ++++++++++++
 arch/arm/boot/dts/imx6ul-phytec-segin.dtsi            |  5 +++--
 3 files changed, 19 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
index 73266b4a889b..fee7a7e938ee 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
@@ -42,20 +42,21 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
 	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
+	phy-handle = <&ethphy1>;
+	status = "disabled";
 
 	mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethphy0: ethernet-phy@1 {
+		ethphy1: ethernet-phy@1 {
 			reg = <1>;
 			interrupt-parent = <&gpio1>;
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			micrel,led-mode = <1>;
 			clocks = <&clks IMX6UL_CLK_ENET_REF>;
 			clock-names = "rmii-ref";
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
index dc06029c5701..81a82dd65019 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -34,6 +34,18 @@
 	status = "okay";
 };
 
+&ethphy1 {
+	status = "okay";
+};
+
+&ethphy2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
 &fec2 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
index 28ba3a4c4c74..7cd24ec40c36 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
@@ -107,7 +107,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2>;
 	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
+	phy-handle = <&ethphy2>;
 	status = "disabled";
 };
 
@@ -160,11 +160,12 @@
 };
 
 &mdio {
-	ethphy1: ethernet-phy@2 {
+	ethphy2: ethernet-phy@2 {
 		reg = <2>;
 		micrel,led-mode = <1>;
 		clocks = <&clks IMX6UL_CLK_ENET2_REF>;
 		clock-names = "rmii-ref";
+		status = "disabled";
 	};
 };
 
-- 
2.7.4