[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190710133247.GA24083@kroah.com>
Date: Wed, 10 Jul 2019 15:32:47 +0200
From: Greg KH <gregkh@...uxfoundation.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: Jiri Slaby <jslaby@...e.cz>,
Stephen Rothwell <sfr@...b.auug.org.au>,
Andrew Morton <akpm@...ux-foundation.org>,
linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org
Subject: [GIT PULL] TTY/Serial patches for 5.3-rc1
The following changes since commit f2c7c76c5d0a443053e94adb9f0918fa2fb85c3a:
Linux 5.2-rc3 (2019-06-02 13:55:33 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-5.3-rc1
for you to fetch changes up to 35a4ed0164e992c9c7b82eb1370081a292131904:
tty: serial: fsl_lpuart: add imx8qxp support (2019-07-04 15:53:45 +0200)
----------------------------------------------------------------
TTY / Serial driver updates for 5.3-rc1
Here is the "large" TTY and Serial driver update for 5.3-rc1.
It's in the negative number of lines overall as we removed an obsolete
serial driver that was causing problems for some people who were trying
to clean up some apis (the mpsc.c driver, which only worked for some
pre-production hardware that no one has anymore.)
Other than that, lots of tiny changes, cleaning up small things along
with some platform-specific serial driver updates.
All of these have been in linux-next for a while now with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
----------------------------------------------------------------
Andy Shevchenko (2):
serial: 8250_of: Use of_device_get_match_data()
serial: 8250: factor out serial8250_{set,clear}_THRI() helpers
Ben Hutchings (1):
Revert "consolemap: Fix a memory leaking bug in drivers/tty/vt/consolemap.c"
Bich Hemon (1):
serial: stm32: select pinctrl state in each suspend/resume function
Borut Seljak (1):
serial: stm32: fix a recursive locking in stm32_config_rs485
Christophe Leroy (1):
tty: serial: cpm_uart - fix init when SMC is relocated
Claire Chang (1):
uart: mediatek: support Rx in-band wakeup
Doug Berger (1):
tty: amba-pl011: allow shared interrupt
Erwan Le Ray (12):
serial: stm32: fix word length configuration
serial: stm32: fix rx error handling
serial: stm32: fix rx data length when parity enabled
serial: stm32: fix transmit_chars when tx is stopped
serial: stm32: Add support of TC bit status check
serial: stm32: fix wakeup source initialization
serial: stm32: fix the get_irq error case
serial: stm32: add support of timeout interrupt for RX
serial: stm32: update PIO transmission
serial: stm32: add support of TX FIFO threshold
serial: stm32: add support of RX FIFO threshold
serial: stm32: add RX and TX FIFO flush
Fabio Estevam (3):
serial: fsl_lpuart: Use dev_info() instead of printk()
serial: imx: Use dev_info() instead of pr_info()
serial: fsl_lpuart: Remove unneeded OOM error message
Fugang Duan (1):
tty: serial: fsl_lpuart: add imx8qxp support
Geert Uytterhoeven (2):
serial: sh-sci: Fix TX DMA buffer flushing and workqueue races
serial: sh-sci: Terminate TX DMA during buffer flushing
Gen Zhang (1):
consolemap: Fix a memory leaking bug in drivers/tty/vt/consolemap.c
Greg Kroah-Hartman (2):
Merge 5.2-rc3 into tty-next
Revert "serial: stm32: select pinctrl state in each suspend/resume function"
Grzegorz Halat (1):
vt/fbcon: deinitialize resources in visual_init() after failed memory allocation
Hao Lee (1):
tty: serial: 8250: Fix type field in format string
Jay Dolan (1):
serial: 8250: Add support for higher baud rates to Pericom chips
Johan Hovold (3):
tty: simserial: drop unused iflag macro
tty: ipoctal: drop unused iflag macro
tty: cpm_uart: drop unused iflag macro
Jorge Ramirez-Ortiz (1):
tty: serial: msm_serial: avoid system lockup condition
Kefeng Wang (1):
tty/serial: digicolor: Fix digicolor-usart already registered warning
Lin Yi (1):
tty: tty_io: fix driver refcount imbalance on error path
Long Cheng (1):
serial: 8250-mtk: modify uart DMA rx
Mark Greer (1):
serial: mpsc: Remove obsolete MPSC driver
Nava kishore Manne (5):
serial: uartps: Use octal permission for module_param()
serial: uartps: Fix multiple line dereference
serial: uartps: Fix long line over 80 chars
serial: uartps: Do not add a trailing semicolon to macro
serial: uartps: Remove useless return from cdns_uart_poll_put_char
Oliver Barta (1):
Revert "serial: 8250: Don't service RX FIFO if interrupts are disabled"
Rautkoski Kimmo EXT (1):
serial: 8250: Fix TX interrupt handling condition
Serge Semin (8):
tty: max310x: Simplify tx-work item code
tty: max310x: Introduce max310x_one port macro-wrapper
tty: max310x: Don't pass stacked buffers to SPI
tty: max310x: Fix invalid baudrate divisors calculator
tty: max310x: Add rx-during-tx rs485 flag support
tty: max310x: Optionally enable rs485 on startup
tty: max310x: Split uart characters insertion loop
tty: serial_core: Set port active bit in uart_port_activate
Sergey Organov (4):
serial: imx: fix locking in set_termios()
serial: imx: set_termios(): factor-out 'ucr2' initial value
serial: imx: set_termios(): clarify RTS/CTS bits calculation
serial: imx: set_termios(): preserve RTS state
Shubhrajyoti Datta (3):
serial: uartps: Move the spinlock after the read of the tx empty
serial: uartps: Add a timeout to the tx empty wait
serial: uartps: Use the same dynamic major number for all ports
Stefan Roese (2):
serial: 8250: Add MSR/MCR TIOCM conversion wrapper functions
serial: mctrl_gpio: Check if GPIO property exisits before requesting it
Thierry Reding (1):
tty: serial: 8250-of: Do not warn on deferred probe
Wei Yongjun (1):
serial: 8250: 8250_core: Fix missing unlock on error in serial8250_register_8250_port()
Yegor Yefremov (1):
tty/serial/8250: use mctrl_gpio helpers
YueHaibing (1):
serial: stm32: Make stm32_get_databits static
kbuild test robot (1):
serial: 8250: pericom_do_set_divisor can be static
Documentation/admin-guide/devices.txt | 4 +-
Documentation/devicetree/bindings/serial/8250.txt | 19 +
arch/ia64/hp/sim/simserial.c | 2 -
drivers/ipack/devices/ipoctal.h | 1 -
drivers/tty/serial/8250/8250.h | 90 +-
drivers/tty/serial/8250/8250_core.c | 20 +
drivers/tty/serial/8250/8250_dma.c | 11 +-
drivers/tty/serial/8250/8250_mtk.c | 73 +-
drivers/tty/serial/8250/8250_of.c | 14 +-
drivers/tty/serial/8250/8250_omap.c | 43 +-
drivers/tty/serial/8250/8250_pci.c | 97 +-
drivers/tty/serial/8250/8250_pnp.c | 4 +-
drivers/tty/serial/8250/8250_port.c | 50 +-
drivers/tty/serial/8250/Kconfig | 1 +
drivers/tty/serial/Kconfig | 14 -
drivers/tty/serial/Makefile | 1 -
drivers/tty/serial/amba-pl011.c | 2 +-
drivers/tty/serial/cpm_uart/cpm_uart_core.c | 19 +-
drivers/tty/serial/digicolor-usart.c | 6 +-
drivers/tty/serial/fsl_lpuart.c | 114 +-
drivers/tty/serial/imx.c | 82 +-
drivers/tty/serial/max310x.c | 157 +-
drivers/tty/serial/mpsc.c | 2138 ---------------------
drivers/tty/serial/msm_serial.c | 4 +
drivers/tty/serial/serial_core.c | 7 +-
drivers/tty/serial/serial_mctrl_gpio.c | 14 +
drivers/tty/serial/sh-sci.c | 33 +-
drivers/tty/serial/stm32-usart.c | 348 +++-
drivers/tty/serial/stm32-usart.h | 33 +-
drivers/tty/serial/xilinx_uartps.c | 37 +-
drivers/tty/tty_io.c | 4 +-
include/linux/mv643xx.h | 46 -
include/linux/serial_8250.h | 1 +
include/uapi/linux/serial_core.h | 2 +-
34 files changed, 887 insertions(+), 2604 deletions(-)
delete mode 100644 drivers/tty/serial/mpsc.c
Powered by blists - more mailing lists