[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <VI1PR0402MB3600EC453079A1A02BF04401FFF00@VI1PR0402MB3600.eurprd04.prod.outlook.com>
Date: Wed, 10 Jul 2019 02:29:11 +0000
From: Andy Duan <fugang.duan@....com>
To: Lothar Waßmann <LW@...O-electronics.de>
CC: "srinivas.kandagatla@...aro.org" <srinivas.kandagatla@...aro.org>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"kernel@...gutronix.de" <kernel@...gutronix.de>,
"festevam@...il.com" <festevam@...il.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: RE: [EXT] Re: [PATCH nvmem 1/1] nvmem: imx: correct the fuse word
index
From: Andy Duan Sent: Friday, July 5, 2019 3:33 PM
> From: Lothar Waßmann <LW@...O-electronics.de> Sent: Friday, July 5, 2019
> 3:13 PM
> > Hi,
> >
> > On Fri, 5 Jul 2019 02:46:32 +0000 Andy Duan wrote:
> > > From: Andy Duan Sent: Friday, July 5, 2019 12:08 AM
> > > > From: Lothar Waßmann <LW@...O-electronics.de> Sent: Thursday,
> July
> > > > 4,
> > > > 2019 11:46 PM
> > > > > Hi,
> > > > >
> > > > > On Thu, 4 Jul 2019 22:20:15 +0800 fugang.duan@....com wrote:
> > > > > > From: Fugang Duan <fugang.duan@....com>
> > > > > >
> > > > > > iMX8 fuse word index represent as one 4-bytes word, it should
> > > > > > not be divided by 4.
> > > > > >
> > > > > > Exp:
> > > > > > - MAC0 address layout in fuse:
> > > > > > offset 708: MAC[3] MAC[2] MAC[1] MAC[0]
> > > > > > offset 709: XX xx MAC[5] MAC[4]
> > > > > >
> > > > > > Signed-off-by: Fugang Duan <fugang.duan@....com>
> > > > > > ---
> > > > > > drivers/nvmem/imx-ocotp-scu.c | 6 +++---
> > > > > > 1 file changed, 3 insertions(+), 3 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/nvmem/imx-ocotp-scu.c
> > > > > > b/drivers/nvmem/imx-ocotp-scu.c index d9dc482..be2f5f0 100644
> > > > > > --- a/drivers/nvmem/imx-ocotp-scu.c
> > > > > > +++ b/drivers/nvmem/imx-ocotp-scu.c
> > > > > > @@ -71,8 +71,8 @@ static int imx_scu_ocotp_read(void *context,
> > > > > > unsigned
> > > > > int offset,
> > > > > > void *p;
> > > > > > int i, ret;
> > > > > >
> > > > > > - index = offset >> 2;
> > > > > > - num_bytes = round_up((offset % 4) + bytes, 4);
> > > > > > + index = offset;
> > > > > > + num_bytes = round_up(bytes, 4);
> > > > > > count = num_bytes >> 2;
> > > > > >
> > > > > > if (count > (priv->data->nregs - index)) @@ -100,7
> > > > > > +100,7 @@ static int imx_scu_ocotp_read(void *context, unsigned
> int offset,
> > > > > > buf++;
> > > > > > }
> > > > > >
> > > > > > - memcpy(val, (u8 *)p + offset % 4, bytes);
> > > > > > + memcpy(val, (u8 *)p, bytes);
> > > > > >
> > > > > > kfree(p);
> > > > > >
> > > > > With these changes you could use the 'val' pointer directly as
> > > > > the destination for ocotp_read() without need for an intermediate
> buffer.
> > > > >
> > > > >
> > > > > Lothar Waßmann
> > > >
> > > > You are right, in fact, we can remove "p" and "buf" pointer.
> > > > Thanks for your review, I will send out the V2.
> > >
> > > Hi Lothar,
> > >
> > > It still need intermediate buffer to read out n words (n * 4 bytes)
> > > from
> > eFuse.
> > > Because 'val' buffer size is real count parsed from DT, which is not
> > > an integer
> > multiple of 4.
> > >
> > > For example, cell->bytes is parsed from "reg" property and it is
> > > real count
> > like 6.
> > > fec_mac0: mac@2c4 {
> > > reg = <0x2c4 6>;
> > > };
> > >
> > > So we have to use intermediate buffer here.
> > >
> > val is a u32 pointer, so legally it cannot point to any buffer whose
> > size is not divisible by four!
> >
> Yes, val is a u32 pointer, as my understand, it point to the 'buf' whose size is
> cell->bytes (the size is not parsed from 'reg' property)
>
> The piece of code:
> buf = kzalloc(cell->bytes, GFP_KERNEL);
> nvmem_reg_read(nvmem, cell->offset, buf, cell->bytes);
> imx_scu_ocotp_read(void *context, unsigned int offset, void *val, size_t
> bytes);
>
> If so, we still need intermediate buffer to read out eFuse words, and copy
> 'cell->bytes'
> bytes to 'val' buffer.
> May I understand wrong ? Thanks very much!
Lothar, any comment ? Thanks !
Powered by blists - more mailing lists