[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <804d7e75ae7e06a913479912b578b3538ca7cd3f.1562842206.git.shengjiu.wang@nxp.com>
Date: Thu, 11 Jul 2019 18:49:45 +0800
From: shengjiu.wang@....com
To: timur@...nel.org, nicoleotsuka@...il.com, Xiubo.Lee@...il.com,
festevam@...il.com, lgirdwood@...il.com, perex@...ex.cz,
tiwai@...e.com, broonie@...nel.org, alsa-devel@...a-project.org
Cc: linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org
Subject: [PATCH V4 1/2] ASoC: fsl_esai: Wrap some operations to be functions
From: Shengjiu Wang <shengjiu.wang@....com>
Extract the operation to be functions, to improve the
readability.
In this patch, fsl_esai_hw_init, fsl_esai_register_restore,
fsl_esai_trigger_start and fsl_esai_trigger_stop are
extracted.
Signed-off-by: Shengjiu Wang <shengjiu.wang@....com>
Acked-by: Nicolin Chen <nicoleotsuka@...il.com>
---
sound/soc/fsl/fsl_esai.c | 192 ++++++++++++++++++++++++---------------
1 file changed, 119 insertions(+), 73 deletions(-)
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index 10d2210c91ef..ab460d6d7432 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -35,6 +35,7 @@
* @fifo_depth: depth of tx/rx FIFO
* @slot_width: width of each DAI slot
* @slots: number of slots
+ * @channels: channel num for tx or rx
* @hck_rate: clock rate of desired HCKx clock
* @sck_rate: clock rate of desired SCKx clock
* @hck_dir: the direction of HCKx pads
@@ -57,6 +58,7 @@ struct fsl_esai {
u32 slots;
u32 tx_mask;
u32 rx_mask;
+ u32 channels[2];
u32 hck_rate[2];
u32 sck_rate[2];
bool hck_dir[2];
@@ -543,64 +545,132 @@ static int fsl_esai_hw_params(struct snd_pcm_substream *substream,
return 0;
}
-static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
- struct snd_soc_dai *dai)
+static int fsl_esai_hw_init(struct fsl_esai *esai_priv)
{
- struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
- bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- u8 i, channels = substream->runtime->channels;
+ struct platform_device *pdev = esai_priv->pdev;
+ int ret;
+
+ /* Reset ESAI unit */
+ ret = regmap_update_bits(esai_priv->regmap, REG_ESAI_ECR,
+ ESAI_ECR_ESAIEN_MASK | ESAI_ECR_ERST_MASK,
+ ESAI_ECR_ESAIEN | ESAI_ECR_ERST);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to reset ESAI: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * We need to enable ESAI so as to access some of its registers.
+ * Otherwise, we would fail to dump regmap from user space.
+ */
+ ret = regmap_update_bits(esai_priv->regmap, REG_ESAI_ECR,
+ ESAI_ECR_ESAIEN_MASK | ESAI_ECR_ERST_MASK,
+ ESAI_ECR_ESAIEN);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable ESAI: %d\n", ret);
+ return ret;
+ }
+
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC,
+ ESAI_PRRC_PDC_MASK, 0);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC,
+ ESAI_PCRC_PC_MASK, 0);
+
+ return 0;
+}
+
+static int fsl_esai_register_restore(struct fsl_esai *esai_priv)
+{
+ int ret;
+
+ /* FIFO reset for safety */
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_TFCR,
+ ESAI_xFCR_xFR, ESAI_xFCR_xFR);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_RFCR,
+ ESAI_xFCR_xFR, ESAI_xFCR_xFR);
+
+ regcache_mark_dirty(esai_priv->regmap);
+ ret = regcache_sync(esai_priv->regmap);
+ if (ret)
+ return ret;
+
+ /* FIFO reset done */
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_TFCR, ESAI_xFCR_xFR, 0);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_RFCR, ESAI_xFCR_xFR, 0);
+
+ return 0;
+}
+
+static void fsl_esai_trigger_start(struct fsl_esai *esai_priv, bool tx)
+{
+ u8 i, channels = esai_priv->channels[tx];
u32 pins = DIV_ROUND_UP(channels, esai_priv->slots);
u32 mask;
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
+ ESAI_xFCR_xFEN_MASK, ESAI_xFCR_xFEN);
+
+ /* Write initial words reqiured by ESAI as normal procedure */
+ for (i = 0; tx && i < channels; i++)
+ regmap_write(esai_priv->regmap, REG_ESAI_ETDR, 0x0);
+
+ /*
+ * When set the TE/RE in the end of enablement flow, there
+ * will be channel swap issue for multi data line case.
+ * In order to workaround this issue, we switch the bit
+ * enablement sequence to below sequence
+ * 1) clear the xSMB & xSMA: which is done in probe and
+ * stop state.
+ * 2) set TE/RE
+ * 3) set xSMB
+ * 4) set xSMA: xSMA is the last one in this flow, which
+ * will trigger esai to start.
+ */
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
+ tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK,
+ tx ? ESAI_xCR_TE(pins) : ESAI_xCR_RE(pins));
+ mask = tx ? esai_priv->tx_mask : esai_priv->rx_mask;
+
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx),
+ ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(mask));
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx),
+ ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(mask));
+}
+
+static void fsl_esai_trigger_stop(struct fsl_esai *esai_priv, bool tx)
+{
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
+ tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, 0);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx),
+ ESAI_xSMA_xS_MASK, 0);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx),
+ ESAI_xSMB_xS_MASK, 0);
+
+ /* Disable and reset FIFO */
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
+ ESAI_xFCR_xFR | ESAI_xFCR_xFEN, ESAI_xFCR_xFR);
+ regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
+ ESAI_xFCR_xFR, 0);
+}
+
+static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
+ bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
+
+ esai_priv->channels[tx] = substream->runtime->channels;
+
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
- ESAI_xFCR_xFEN_MASK, ESAI_xFCR_xFEN);
-
- /* Write initial words reqiured by ESAI as normal procedure */
- for (i = 0; tx && i < channels; i++)
- regmap_write(esai_priv->regmap, REG_ESAI_ETDR, 0x0);
-
- /*
- * When set the TE/RE in the end of enablement flow, there
- * will be channel swap issue for multi data line case.
- * In order to workaround this issue, we switch the bit
- * enablement sequence to below sequence
- * 1) clear the xSMB & xSMA: which is done in probe and
- * stop state.
- * 2) set TE/RE
- * 3) set xSMB
- * 4) set xSMA: xSMA is the last one in this flow, which
- * will trigger esai to start.
- */
- regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
- tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK,
- tx ? ESAI_xCR_TE(pins) : ESAI_xCR_RE(pins));
- mask = tx ? esai_priv->tx_mask : esai_priv->rx_mask;
-
- regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx),
- ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(mask));
- regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx),
- ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(mask));
-
+ fsl_esai_trigger_start(esai_priv, tx);
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
- tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, 0);
- regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMA(tx),
- ESAI_xSMA_xS_MASK, 0);
- regmap_update_bits(esai_priv->regmap, REG_ESAI_xSMB(tx),
- ESAI_xSMB_xS_MASK, 0);
-
- /* Disable and reset FIFO */
- regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
- ESAI_xFCR_xFR | ESAI_xFCR_xFEN, ESAI_xFCR_xFR);
- regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
- ESAI_xFCR_xFR, 0);
+ fsl_esai_trigger_stop(esai_priv, tx);
break;
default:
return -EINVAL;
@@ -866,22 +936,9 @@ static int fsl_esai_probe(struct platform_device *pdev)
dev_set_drvdata(&pdev->dev, esai_priv);
- /* Reset ESAI unit */
- ret = regmap_write(esai_priv->regmap, REG_ESAI_ECR, ESAI_ECR_ERST);
- if (ret) {
- dev_err(&pdev->dev, "failed to reset ESAI: %d\n", ret);
+ ret = fsl_esai_hw_init(esai_priv);
+ if (ret)
return ret;
- }
-
- /*
- * We need to enable ESAI so as to access some of its registers.
- * Otherwise, we would fail to dump regmap from user space.
- */
- ret = regmap_write(esai_priv->regmap, REG_ESAI_ECR, ESAI_ECR_ESAIEN);
- if (ret) {
- dev_err(&pdev->dev, "failed to enable ESAI: %d\n", ret);
- return ret;
- }
esai_priv->tx_mask = 0xFFFFFFFF;
esai_priv->rx_mask = 0xFFFFFFFF;
@@ -955,20 +1012,10 @@ static int fsl_esai_runtime_resume(struct device *dev)
regcache_cache_only(esai->regmap, false);
- /* FIFO reset for safety */
- regmap_update_bits(esai->regmap, REG_ESAI_TFCR,
- ESAI_xFCR_xFR, ESAI_xFCR_xFR);
- regmap_update_bits(esai->regmap, REG_ESAI_RFCR,
- ESAI_xFCR_xFR, ESAI_xFCR_xFR);
-
- ret = regcache_sync(esai->regmap);
+ ret = fsl_esai_register_restore(esai);
if (ret)
goto err_regcache_sync;
- /* FIFO reset done */
- regmap_update_bits(esai->regmap, REG_ESAI_TFCR, ESAI_xFCR_xFR, 0);
- regmap_update_bits(esai->regmap, REG_ESAI_RFCR, ESAI_xFCR_xFR, 0);
-
return 0;
err_regcache_sync:
@@ -991,7 +1038,6 @@ static int fsl_esai_runtime_suspend(struct device *dev)
struct fsl_esai *esai = dev_get_drvdata(dev);
regcache_cache_only(esai->regmap, true);
- regcache_mark_dirty(esai->regmap);
if (!IS_ERR(esai->fsysclk))
clk_disable_unprepare(esai->fsysclk);
--
2.21.0
Powered by blists - more mailing lists