[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAFp+6iHrJ74BMMcpiKG=wMZvBDe=LcAAPjTsZ9Co+HrqMFsPTQ@mail.gmail.com>
Date: Fri, 12 Jul 2019 16:36:35 +0530
From: Vivek Gautam <vivek.gautam@...eaurora.org>
To: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Andy Gross <agross@...nel.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
Jordan Crouse <jcrouse@...eaurora.org>,
rishabhb@...eaurora.org, vnkgutta@...eaurora.org,
Evan Green <evgreen@...omium.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] soc: qcom: llcc: Rename llcc-sdm845 to llcc-plat
On Thu, Jul 11, 2019 at 9:19 PM Bjorn Andersson
<bjorn.andersson@...aro.org> wrote:
>
> On Thu 11 Jul 04:03 PDT 2019, Vivek Gautam wrote:
>
> > To avoid adding files for each future supported SoCs rename
> > the file to a generic name - llcc-plat, so that llcc configuration
> > tables for other SoCs can be added in the same driver.
> >
>
> We've had a generic LLCC Kconfig option and then a specific SDM845 one,
> with this change we have two different generic options and both would
> either always be enabled or disabled.
>
> So I think you should drop QCOM_SDM845_LLCC and build both llcc-slice
> and llcc-plat into the same qcom_llcc.ko instead.
Yea. I can chuck off the llcc-slice module. But for readability would
it still be
better to maintain separate files. I will drop the SDM845 config, and keep only
QCOM_LLC.
Best regards
Vivek
>
> Regards,
> Bjorn
>
> > Signed-off-by: Vivek Gautam <vivek.gautam@...eaurora.org>
> > ---
> > drivers/soc/qcom/Kconfig | 10 +++++-----
> > drivers/soc/qcom/Makefile | 2 +-
> > drivers/soc/qcom/{llcc-sdm845.c => llcc-plat.c} | 0
> > 3 files changed, 6 insertions(+), 6 deletions(-)
> > rename drivers/soc/qcom/{llcc-sdm845.c => llcc-plat.c} (100%)
> >
> > diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> > index a6d1bfb17279..8110d415b18e 100644
> > --- a/drivers/soc/qcom/Kconfig
> > +++ b/drivers/soc/qcom/Kconfig
> > @@ -62,13 +62,13 @@ config QCOM_LLCC
> > to clients that use the LLCC. Say yes here to enable LLCC slice
> > driver.
> >
> > -config QCOM_SDM845_LLCC
> > - tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
> > +config QCOM_PLAT_LLCC
> > + tristate "Qualcomm Technologies, Inc. platform LLCC driver"
> > depends on QCOM_LLCC
> > help
> > - Say yes here to enable the LLCC driver for SDM845. This provides
> > - data required to configure LLCC so that clients can start using the
> > - LLCC slices.
> > + Say yes here to enable the LLCC driver for Qcom platforms, such as
> > + SDM845. This provides data required to configure LLCC so that
> > + clients can start using the LLCC slices.
> >
> > config QCOM_MDT_LOADER
> > tristate
> > diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> > index eeb088beb15f..3bf26667d7ee 100644
> > --- a/drivers/soc/qcom/Makefile
> > +++ b/drivers/soc/qcom/Makefile
> > @@ -21,6 +21,6 @@ obj-$(CONFIG_QCOM_SMSM) += smsm.o
> > obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
> > obj-$(CONFIG_QCOM_APR) += apr.o
> > obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
> > -obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
> > +obj-$(CONFIG_QCOM_PLAT_LLCC) += llcc-plat.o
> > obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o
> > obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o
> > diff --git a/drivers/soc/qcom/llcc-sdm845.c b/drivers/soc/qcom/llcc-plat.c
> > similarity index 100%
> > rename from drivers/soc/qcom/llcc-sdm845.c
> > rename to drivers/soc/qcom/llcc-plat.c
> > --
> > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> > of Code Aurora Forum, hosted by The Linux Foundation
> >
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists