[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3733253.hEy9q5iLy3@g550jk>
Date: Sat, 13 Jul 2019 13:26:45 +0200
From: Luca Weiss <luca@...tu.xyz>
To: Brian Masney <masneyb@...tation.org>
Cc: linux-arm-msm@...r.kernel.org,
~martijnbraam/pmos-upstream@...ts.sr.ht,
Andy Gross <agross@...nel.org>,
David Brown <david.brown@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ARM: dts: msm8974-FP2: add reboot-mode node
Hi Brian,
how about something like that (formatting is surely broken because I'm not
sending this with git-send-email^^)?
I'd says this should be work fine with all devices as all modes are defined in
the device-specific dts but the reg and offset values are in the board dts.
Should I also add a status = "disabled" to the reboot-mode node in the board
dts?
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/
dts/qcom-msm8974-fairphone-fp2.dts
index 643c57f84818..ff4a3e0aa746 100644
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -338,6 +338,16 @@
};
};
};
+
+ imem@...05000 {
+ status = "okay";
+
+ reboot-mode {
+ mode-normal = <0x77665501>;
+ mode-bootloader = <0x77665500>;
+ mode-recovery = <0x77665502>;
+ };
+ };
};
&spmi_bus {
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-
msm8974.dtsi
index 45b5c8ef0374..1927430bded7 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1085,6 +1085,17 @@
};
};
};
+
+ imem@...05000 {
+ status = "disabled";
+ compatible = "syscon", "simple-mfd";
+ reg = <0xfe805000 0x1000>;
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x65c>;
+ };
+ };
};
smd {
Regards,
Luca
Powered by blists - more mailing lists