[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190713133049.GA133650@google.com>
Date: Sat, 13 Jul 2019 09:30:49 -0400
From: Joel Fernandes <joel@...lfernandes.org>
To: "Paul E. McKenney" <paulmck@...ux.ibm.com>
Cc: linux-kernel@...r.kernel.org, Oleg Nesterov <oleg@...hat.com>,
Alexey Kuznetsov <kuznet@....inr.ac.ru>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Borislav Petkov <bp@...en8.de>, c0d1n61at3@...il.com,
"David S. Miller" <davem@...emloft.net>, edumazet@...gle.com,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Hideaki YOSHIFUJI <yoshfuji@...ux-ipv6.org>,
"H. Peter Anvin" <hpa@...or.com>, Ingo Molnar <mingo@...hat.com>,
Jonathan Corbet <corbet@....net>,
Josh Triplett <josh@...htriplett.org>, keescook@...omium.org,
kernel-hardening@...ts.openwall.com, kernel-team@...roid.com,
Lai Jiangshan <jiangshanlai@...il.com>,
Len Brown <lenb@...nel.org>, linux-acpi@...r.kernel.org,
linux-doc@...r.kernel.org, linux-pci@...r.kernel.org,
linux-pm@...r.kernel.org,
Mathieu Desnoyers <mathieu.desnoyers@...icios.com>,
neilb@...e.com, netdev@...r.kernel.org,
Pavel Machek <pavel@....cz>, peterz@...radead.org,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Rasmus Villemoes <rasmus.villemoes@...vas.dk>,
rcu@...r.kernel.org, Steven Rostedt <rostedt@...dmis.org>,
Tejun Heo <tj@...nel.org>,
Thomas Gleixner <tglx@...utronix.de>, will@...nel.org,
"maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)" <x86@...nel.org>
Subject: Re: [PATCH v2 3/9] rcu/sync: Remove custom check for reader-section
On Sat, Jul 13, 2019 at 01:21:14AM -0700, Paul E. McKenney wrote:
> On Fri, Jul 12, 2019 at 11:10:08PM -0400, Joel Fernandes wrote:
> > On Fri, Jul 12, 2019 at 11:01:50PM -0400, Joel Fernandes wrote:
> > > On Fri, Jul 12, 2019 at 04:32:06PM -0700, Paul E. McKenney wrote:
> > > > On Fri, Jul 12, 2019 at 05:35:59PM -0400, Joel Fernandes wrote:
> > > > > On Fri, Jul 12, 2019 at 01:00:18PM -0400, Joel Fernandes (Google) wrote:
> > > > > > The rcu/sync code was doing its own check whether we are in a reader
> > > > > > section. With RCU consolidating flavors and the generic helper added in
> > > > > > this series, this is no longer need. We can just use the generic helper
> > > > > > and it results in a nice cleanup.
> > > > > >
> > > > > > Cc: Oleg Nesterov <oleg@...hat.com>
> > > > > > Signed-off-by: Joel Fernandes (Google) <joel@...lfernandes.org>
> > > > >
> > > > > Hi Oleg,
> > > > > Slightly unrelated to the patch,
> > > > > I tried hard to understand this comment below in percpu_down_read() but no dice.
> > > > >
> > > > > I do understand how rcu sync and percpu rwsem works, however the comment
> > > > > below didn't make much sense to me. For one, there's no readers_fast anymore
> > > > > so I did not follow what readers_fast means. Could the comment be updated to
> > > > > reflect latest changes?
> > > > > Also could you help understand how is a writer not able to change
> > > > > sem->state and count the per-cpu read counters at the same time as the
> > > > > comment tries to say?
> > > > >
> > > > > /*
> > > > > * We are in an RCU-sched read-side critical section, so the writer
> > > > > * cannot both change sem->state from readers_fast and start checking
> > > > > * counters while we are here. So if we see !sem->state, we know that
> > > > > * the writer won't be checking until we're past the preempt_enable()
> > > > > * and that once the synchronize_rcu() is done, the writer will see
> > > > > * anything we did within this RCU-sched read-size critical section.
> > > > > */
> > > > >
> > > > > Also,
> > > > > I guess we could get rid of all of the gp_ops struct stuff now that since all
> > > > > the callbacks are the same now. I will post that as a follow-up patch to this
> > > > > series.
> > > >
> > > > Hello, Joel,
> > > >
> > > > Oleg has a set of patches updating this code that just hit mainline
> > > > this week. These patches get rid of the code that previously handled
> > > > RCU's multiple flavors. Or are you looking at current mainline and
> > > > me just missing your point?
> > > >
> > >
> > > Hi Paul,
> > > You are right on point. I have a bad habit of not rebasing my trees. In this
> > > case the feature branch of mine in concern was based on v5.1. Needless to
> > > say, I need to rebase my tree.
> > >
> > > Yes, this sync clean up patch does conflict when I rebase, but other patches
> > > rebase just fine.
> > >
> > > The 2 options I see are:
> > > 1. Let us drop this patch for now and I resend it later.
> > > 2. I resend all patches based on Linus's master branch.
> >
> > Below is the updated patch based on Linus master branch:
> >
> > ---8<-----------------------
> >
> > >From 5f40c9a07fcf3d6dafc2189599d0ba9443097d0f Mon Sep 17 00:00:00 2001
> > From: "Joel Fernandes (Google)" <joel@...lfernandes.org>
> > Date: Fri, 12 Jul 2019 12:13:27 -0400
> > Subject: [PATCH v2.1 3/9] rcu/sync: Remove custom check for reader-section
> >
> > The rcu/sync code was doing its own check whether we are in a reader
> > section. With RCU consolidating flavors and the generic helper added in
> > this series, this is no longer need. We can just use the generic helper
> > and it results in a nice cleanup.
> >
> > Cc: Oleg Nesterov <oleg@...hat.com>
> > Signed-off-by: Joel Fernandes (Google) <joel@...lfernandes.org>
> > ---
> > include/linux/rcu_sync.h | 4 +---
> > 1 file changed, 1 insertion(+), 3 deletions(-)
> >
> > diff --git a/include/linux/rcu_sync.h b/include/linux/rcu_sync.h
> > index 9b83865d24f9..0027d4c8087c 100644
> > --- a/include/linux/rcu_sync.h
> > +++ b/include/linux/rcu_sync.h
> > @@ -31,9 +31,7 @@ struct rcu_sync {
> > */
> > static inline bool rcu_sync_is_idle(struct rcu_sync *rsp)
> > {
> > - RCU_LOCKDEP_WARN(!rcu_read_lock_held() &&
> > - !rcu_read_lock_bh_held() &&
> > - !rcu_read_lock_sched_held(),
> > + RCU_LOCKDEP_WARN(!rcu_read_lock_any_held(),
>
> I believe that replacing rcu_read_lock_sched_held() with preemptible()
> in a CONFIG_PREEMPT=n kernel will give you false-positive splats here.
> If you have not already done so, could you please give it a try?
Hi Paul,
I don't think it will cause splats for !CONFIG_PREEMPT.
Currently, rcu_read_lock_any_held() introduced in this patch returns true if
!preemptible(). This means that:
The following expression above:
RCU_LOCKDEP_WARN(!rcu_read_lock_any_held(),...)
Becomes:
RCU_LOCKDEP_WARN(preemptible(), ...)
For, CONFIG_PREEMPT=n kernels, this means:
RCU_LOCKDEP_WARN(0, ...)
Which would mean no splats. Or, did I miss the point?
thanks,
- Joel
Powered by blists - more mailing lists