lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190715120416.3561-2-k.konieczny@partner.samsung.com>
Date:   Mon, 15 Jul 2019 14:04:13 +0200
From:   Kamil Konieczny <k.konieczny@...tner.samsung.com>
To:     k.konieczny@...tner.samsung.com
Cc:     Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        Marek Szyprowski <m.szyprowski@...sung.com>,
        Chanwoo Choi <cw00.choi@...sung.com>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        Kukjin Kim <kgene@...nel.org>,
        Kyungmin Park <kyungmin.park@...sung.com>,
        Mark Rutland <mark.rutland@....com>,
        MyungJoo Ham <myungjoo.ham@...sung.com>,
        Nishanth Menon <nm@...com>, Rob Herring <robh+dt@...nel.org>,
        Stephen Boyd <sboyd@...nel.org>,
        Viresh Kumar <vireshk@...nel.org>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-pm@...r.kernel.org, linux-samsung-soc@...r.kernel.org
Subject: [PATCH v2 1/4] opp: core: add regulators enable and disable

Add enable regulators to dev_pm_opp_set_regulators() and disable
regulators to dev_pm_opp_put_regulators(). This prepares for
converting exynos-bus devfreq driver to use dev_pm_opp_set_rate().

Signed-off-by: Kamil Konieczny <k.konieczny@...tner.samsung.com>
--
Changes in v2:

- move regulator enable and disable into loop

---
 drivers/opp/core.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 0e7703fe733f..069c5cf8827e 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -1570,6 +1570,10 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
 			goto free_regulators;
 		}
 
+		ret = regulator_enable(reg);
+		if (ret < 0)
+			goto disable;
+
 		opp_table->regulators[i] = reg;
 	}
 
@@ -1582,9 +1586,15 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
 
 	return opp_table;
 
+disable:
+	regulator_put(reg);
+	--i;
+
 free_regulators:
-	while (i != 0)
-		regulator_put(opp_table->regulators[--i]);
+	for (; i >= 0; --i) {
+		regulator_disable(opp_table->regulators[i]);
+		regulator_put(opp_table->regulators[i]);
+	}
 
 	kfree(opp_table->regulators);
 	opp_table->regulators = NULL;
@@ -1610,8 +1620,10 @@ void dev_pm_opp_put_regulators(struct opp_table *opp_table)
 	/* Make sure there are no concurrent readers while updating opp_table */
 	WARN_ON(!list_empty(&opp_table->opp_list));
 
-	for (i = opp_table->regulator_count - 1; i >= 0; i--)
+	for (i = opp_table->regulator_count - 1; i >= 0; i--) {
+		regulator_disable(opp_table->regulators[i]);
 		regulator_put(opp_table->regulators[i]);
+	}
 
 	_free_set_opp_data(opp_table);
 
-- 
2.22.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ