| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2f2ba561-793f-a6a0-5765-ef8e9a5a3ab6@redhat.com>
Date: Tue, 16 Jul 2019 11:30:14 +0200
From: Auger Eric <eric.auger@...hat.com>
To: Jacob Pan <jacob.jun.pan@...ux.intel.com>,
iommu@...ts.linux-foundation.org,
LKML <linux-kernel@...r.kernel.org>,
Joerg Roedel <joro@...tes.org>,
David Woodhouse <dwmw2@...radead.org>,
Alex Williamson <alex.williamson@...hat.com>,
Jean-Philippe Brucker <jean-philippe.brucker@....com>
Cc: Yi Liu <yi.l.liu@...el.com>, "Tian, Kevin" <kevin.tian@...el.com>,
Raj Ashok <ashok.raj@...el.com>,
Christoph Hellwig <hch@...radead.org>,
Lu Baolu <baolu.lu@...ux.intel.com>,
Andriy Shevchenko <andriy.shevchenko@...ux.intel.com>
Subject: Re: [PATCH v4 14/22] iommu/vt-d: Add custom allocator for IOASID
Hi Jacob,
On 6/9/19 3:44 PM, Jacob Pan wrote:
> When VT-d driver runs in the guest, PASID allocation must be
> performed via virtual command interface. This patch registers a
> custom IOASID allocator which takes precedence over the default
> XArray based allocator. The resulting IOASID allocation will always
> come from the host. This ensures that PASID namespace is system-
> wide.
>
> Signed-off-by: Lu Baolu <baolu.lu@...ux.intel.com>
> Signed-off-by: Liu, Yi L <yi.l.liu@...el.com>
> Signed-off-by: Jacob Pan <jacob.jun.pan@...ux.intel.com>
> ---
> drivers/iommu/Kconfig | 1 +
> drivers/iommu/intel-iommu.c | 60 +++++++++++++++++++++++++++++++++++++++++++++
> include/linux/intel-iommu.h | 2 ++
> 3 files changed, 63 insertions(+)
>
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index c40c4b5..5d1bc2a 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -213,6 +213,7 @@ config INTEL_IOMMU_SVM
> bool "Support for Shared Virtual Memory with Intel IOMMU"
> depends on INTEL_IOMMU && X86
> select PCI_PASID
> + select IOASID
> select MMU_NOTIFIER
> select IOASID
> help
> diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
> index 09b8ff0..5b84994 100644
> --- a/drivers/iommu/intel-iommu.c
> +++ b/drivers/iommu/intel-iommu.c
> @@ -1711,6 +1711,8 @@ static void free_dmar_iommu(struct intel_iommu *iommu)
> if (ecap_prs(iommu->ecap))
> intel_svm_finish_prq(iommu);
> }
> + ioasid_unregister_allocator(&iommu->pasid_allocator);
> +
> #endif
> }
>
> @@ -4820,6 +4822,46 @@ static int __init platform_optin_force_iommu(void)
> return 1;
> }
>
> +#ifdef CONFIG_INTEL_IOMMU_SVM
> +static ioasid_t intel_ioasid_alloc(ioasid_t min, ioasid_t max, void *data)
> +{
> + struct intel_iommu *iommu = data;
> + ioasid_t ioasid;
> +
> + /*
> + * VT-d virtual command interface always uses the full 20 bit
> + * PASID range. Host can partition guest PASID range based on
> + * policies but it is out of guest's control.
> + */
> + if (min < PASID_MIN || max > PASID_MAX)
> + return -EINVAL;
ioasid_alloc() does not handle that error value, use INVALID_IOASID?
> +
> + if (vcmd_alloc_pasid(iommu, &ioasid))
> + return INVALID_IOASID;
> +
> + return ioasid;
> +}
> +
> +static void intel_ioasid_free(ioasid_t ioasid, void *data)
> +{
> + struct iommu_pasid_alloc_info *svm;
> + struct intel_iommu *iommu = data;
> +
> + if (!iommu)
> + return;
> + /*
> + * Sanity check the ioasid owner is done at upper layer, e.g. VFIO
> + * We can only free the PASID when all the devices are unbond.
> + */
> + svm = ioasid_find(NULL, ioasid, NULL);
> + if (!svm) {
> + pr_warn("Freeing unbond IOASID %d\n", ioasid);
> + return;
> + }
> + vcmd_free_pasid(iommu, ioasid);
> +}
> +#endif
> +
> int __init intel_iommu_init(void)
> {
> int ret = -ENODEV;
> @@ -4924,6 +4966,24 @@ int __init intel_iommu_init(void)
> "%s", iommu->name);
> iommu_device_set_ops(&iommu->iommu, &intel_iommu_ops);
> iommu_device_register(&iommu->iommu);
> +#ifdef CONFIG_INTEL_IOMMU_SVM
> + if (cap_caching_mode(iommu->cap) && sm_supported(iommu)) {
> + /*
> + * Register a custom ASID allocator if we are running
> + * in a guest, the purpose is to have a system wide PASID
> + * namespace among all PASID users.
> + * There can be multiple vIOMMUs in each guest but only
> + * one allocator is active. All vIOMMU allocators will
> + * eventually be calling the same host allocator.
> + */
> + iommu->pasid_allocator.alloc = intel_ioasid_alloc;
> + iommu->pasid_allocator.free = intel_ioasid_free;
> + iommu->pasid_allocator.pdata = (void *)iommu;
> + ret = ioasid_register_allocator(&iommu->pasid_allocator);
> + if (ret)
> + pr_warn("Custom PASID allocator registeration failed\n");
what if it fails, don't you want a tear down path?
Thanks
Eric
> + }
> +#endif
> }
>
> bus_set_iommu(&pci_bus_type, &intel_iommu_ops);
> diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
> index bff907b..8605c74 100644
> --- a/include/linux/intel-iommu.h
> +++ b/include/linux/intel-iommu.h
> @@ -31,6 +31,7 @@
> #include <linux/iommu.h>
> #include <linux/io-64-nonatomic-lo-hi.h>
> #include <linux/dmar.h>
> +#include <linux/ioasid.h>
>
> #include <asm/cacheflush.h>
> #include <asm/iommu.h>
> @@ -549,6 +550,7 @@ struct intel_iommu {
> #ifdef CONFIG_INTEL_IOMMU_SVM
> struct page_req_dsc *prq;
> unsigned char prq_name[16]; /* Name for PRQ interrupt */
> + struct ioasid_allocator_ops pasid_allocator; /* Custom allocator for PASIDs */
> #endif
> struct q_inval *qi; /* Queued invalidation info */
> u32 *iommu_state; /* Store iommu states between suspend and resume.*/
>
Powered by blists - more mailing lists