[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAL_JsqKMo_uv4Ur-D4NaUXk94hGJeRt5fg+0998dDjJCTgumGg@mail.gmail.com>
Date: Tue, 16 Jul 2019 08:57:21 -0600
From: Rob Herring <robh+dt@...nel.org>
To: Andrew Jeffery <andrew@...id.au>
Cc: linux-mmc <linux-mmc@...r.kernel.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
Mark Rutland <mark.rutland@....com>,
Joel Stanley <joel@....id.au>,
Adrian Hunter <adrian.hunter@...el.com>,
devicetree@...r.kernel.org,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
linux-aspeed@...ts.ozlabs.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Ryan Chen <ryanchen.aspeed@...il.com>
Subject: Re: [PATCH v2 1/2] dt-bindings: mmc: Document Aspeed SD controller
On Mon, Jul 15, 2019 at 6:36 PM Andrew Jeffery <andrew@...id.au> wrote:
>
>
>
> On Tue, 16 Jul 2019, at 07:47, Rob Herring wrote:
> > On Thu, Jul 11, 2019 at 9:32 PM Andrew Jeffery <andrew@...id.au> wrote:
> > >
> > > The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the
> > > SDIO Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit
> > > data bus if only a single slot is enabled.
> > >
> > > Signed-off-by: Andrew Jeffery <andrew@...id.au>
> > > ---
> > > In v2:
> > >
> > > * Rename to aspeed,sdhci.yaml
> > > * Rename sd-controller compatible
> > > * Add `maxItems: 1` for reg properties
> > > * Move sdhci subnode description to patternProperties
> > > * Drop sdhci compatible requirement
> > > * #address-cells and #size-cells are required
> > > * Prevent additional properties
> > > * Implement explicit ranges in example
> > > * Remove slot property
> > >
> > > .../devicetree/bindings/mmc/aspeed,sdhci.yaml | 90 +++++++++++++++++++
> > > 1 file changed, 90 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> > > new file mode 100644
> > > index 000000000000..67a691c3348c
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
> > > @@ -0,0 +1,90 @@
> > > +# SPDX-License-Identifier: GPL-2.0-or-later
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: ASPEED SD/SDIO/eMMC Controller
> > > +
> > > +maintainers:
> > > + - Andrew Jeffery <andrew@...id.au>
> > > + - Ryan Chen <ryanchen.aspeed@...il.com>
> > > +
> > > +description: |+
> > > + The ASPEED SD/SDIO/eMMC controller exposes two slots implementing the SDIO
> > > + Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit data bus if
> > > + only a single slot is enabled.
> > > +
> > > + The two slots are supported by a common configuration area. As the SDHCIs for
> > > + the slots are dependent on the common configuration area, they are described
> > > + as child nodes.
> > > +
> > > +properties:
> > > + compatible:
> > > + enum: [ aspeed,ast2400-sd-controller, aspeed,ast2500-sd-controller ]
> >
> > This is actually a list of 4 strings. Please reformat to 1 per line.
>
> On reflection that's obvious, but also a somewhat subtle interaction with the
> preference for no quotes (the obvious caveat being "except where required").
It wasn't something I'd run into before. I'm working on a check, but
unfortunately we can only check for quotes not needed and can't check
for missing quotes.
> Thanks for pointing it out.
>
> I have been running `make dt_binding_check` and `make dtbs_check` over
> these, looks like I need to up my game a bit though. Do you do additional things
> in your workflow?
That should have thrown the warnings. If you aren't seeing those, do
you have dtschema package installed (see
Documentation/devicetree/writing-schema.md)? Or it could be erroring
out on something else first. There's a few breakages that I'm trying
to fix.
Rob
Powered by blists - more mailing lists