linux-kernel - Re: [PATCH 09/18] drivers: firmware: psci: Add support for PM domains using genpd

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190716150533.GD7250@e107155-lin>
Date:   Tue, 16 Jul 2019 16:05:34 +0100
From:   Sudeep Holla <sudeep.holla@....com>
To:     Ulf Hansson <ulf.hansson@...aro.org>
Cc:     Lorenzo Pieralisi <Lorenzo.Pieralisi@....com>,
        Mark Rutland <mark.rutland@....com>,
        linux-arm-kernel@...ts.infradead.org,
        "Rafael J . Wysocki" <rjw@...ysocki.net>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        "Raju P . L . S . S . S . N" <rplsssn@...eaurora.org>,
        Amit Kucheria <amit.kucheria@...aro.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Stephen Boyd <sboyd@...nel.org>,
        Niklas Cassel <niklas.cassel@...aro.org>,
        Tony Lindgren <tony@...mide.com>,
        Kevin Hilman <khilman@...nel.org>,
        Lina Iyer <ilina@...eaurora.org>,
        Viresh Kumar <viresh.kumar@...aro.org>,
        Vincent Guittot <vincent.guittot@...aro.org>,
        Geert Uytterhoeven <geert+renesas@...der.be>,
        Souvik Chakravarty <souvik.chakravarty@....com>,
        Sudeep Holla <sudeep.holla@....com>, linux-pm@...r.kernel.org,
        linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        Lina Iyer <lina.iyer@...aro.org>
Subject: Re: [PATCH 09/18] drivers: firmware: psci: Add support for PM
 domains using genpd

On Mon, May 13, 2019 at 09:22:51PM +0200, Ulf Hansson wrote:
> When the hierarchical CPU topology layout is used in DT, we need to setup
> the corresponding PM domain data structures, as to allow a CPU and a group
> of CPUs to be power managed accordingly. Let's enable this by deploying
> support through the genpd interface.
>
> Additionally, when the OS initiated mode is supported by the PSCI FW, let's
> also parse the domain idle states DT bindings as to make genpd responsible
> for the state selection, when the states are compatible with
> "domain-idle-state". Otherwise, when only Platform Coordinated mode is
> supported, we rely solely on the state selection to be managed through the
> regular cpuidle framework.
>
> If the initialization of the PM domain data structures succeeds and the OS
> initiated mode is supported, we try to switch to it. In case it fails,
> let's fall back into a degraded mode, rather than bailing out and returning
> an error code.
>
> Due to that the OS initiated mode may become enabled, we need to adjust to
> maintain backwards compatibility for a kernel started through a kexec call.
> Do this by explicitly switch to Platform Coordinated mode during boot.
>
> Finally, the actual initialization of the PM domain data structures, is
> done via calling the new shared function, psci_dt_init_pm_domains().
> However, this is implemented by subsequent changes.
>
> Co-developed-by: Lina Iyer <lina.iyer@...aro.org>
> Signed-off-by: Lina Iyer <lina.iyer@...aro.org>
> Signed-off-by: Ulf Hansson <ulf.hansson@...aro.org>
> ---
>
> Changes:
> 	- Simplify code setting domain_state at power off.
> 	- Use the genpd ->free_state() callback to manage freeing of states.
> 	- Fixup a bogus while loop.
>
> ---
>  drivers/firmware/psci/Makefile         |   2 +-
>  drivers/firmware/psci/psci.c           |   7 +-
>  drivers/firmware/psci/psci.h           |   5 +
>  drivers/firmware/psci/psci_pm_domain.c | 268 +++++++++++++++++++++++++
>  4 files changed, 280 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/firmware/psci/psci_pm_domain.c
>

[...]

>  #endif /* __PSCI_H */
> diff --git a/drivers/firmware/psci/psci_pm_domain.c b/drivers/firmware/psci/psci_pm_domain.c
> new file mode 100644
> index 000000000000..3c6ca846caf4
> --- /dev/null
> +++ b/drivers/firmware/psci/psci_pm_domain.c
> @@ -0,0 +1,268 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PM domains for CPUs via genpd - managed by PSCI.
> + *
> + * Copyright (C) 2019 Linaro Ltd.
> + * Author: Ulf Hansson <ulf.hansson@...aro.org>
> + *
> + */
> +

[...]

> +static int psci_pd_power_off(struct generic_pm_domain *pd)
> +{
> +	struct genpd_power_state *state = &pd->states[pd->state_idx];
> +	u32 *pd_state;
> +
> +	/* If we have failed to enable OSI mode, then abort power off. */
> +	if (psci_has_osi_support() && !osi_mode_enabled)
> +		return -EBUSY;
> +
> +	if (!state->data)
> +		return 0;
> +
> +	/* When OSI mode is enabled, set the corresponding domain state. */
> +	pd_state = state->data;
> +	psci_set_domain_state(*pd_state);

I trying to understand how would this scale to level 2(cluster of
clusters or for simply system). The current code for psci_set_domain_state
just stores the value @pd_state into per-cpu domain_state. E.g.: Now if
the system level pd is getting called after cluster PD, it will set the
domain state to system level PD state. It won't work with original
format and it may work with extended format if it's carefully crafted.
In short, the point is just over-writing domain_state is asking for
troubles IMO.

--
Regards,
Sudeep