| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CANAwSgRR=_DQ5UOycXO=xwrwhxSDW+miNrwZsepq+vzk2rPzEw@mail.gmail.com>
Date: Tue, 16 Jul 2019 23:02:21 +0530
From: Anand Moon <linux.amoon@...il.com>
To: Marek Szyprowski <m.szyprowski@...sung.com>
Cc: Linux USB Mailing List <linux-usb@...r.kernel.org>,
linux-samsung-soc@...r.kernel.org,
Linux Kernel <linux-kernel@...r.kernel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Mathias Nyman <mathias.nyman@...el.com>,
Felipe Balbi <balbi@...nel.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
Jochen Sprickerhof <jochen@...ickerhof.de>
Subject: Re: [PATCH 2/3] usb: dwc3: exynos: Use Exynos specific XHCI-plat
driver variant
Hi Marek,
On Thu, 27 Jun 2019 at 12:47, Marek Szyprowski <m.szyprowski@...sung.com> wrote:
>
> Exynos5 SoCs needs to calibrate USB3.0 DRD PHY after every XHCI HCD
> reset. This patch adds support for instantiating Exynos5-specific variant
> of XHCI-plat driver, which handles the required USB3.0 DRD PHY
> calibration.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@...sung.com>
> ---
Please add my tested on XU4 / XU3 using linux next-20190716
Tested-by: Anand Moon <linux.amoon@...il.com>
Best Regards
-Anand
> drivers/usb/dwc3/Kconfig | 1 +
> drivers/usb/dwc3/core.c | 1 +
> drivers/usb/dwc3/core.h | 1 +
> drivers/usb/dwc3/dwc3-exynos.c | 64 +++++++++++++++++++++++-----------
> drivers/usb/dwc3/host.c | 2 +-
> 5 files changed, 47 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
> index 89abc6078703..badf86dfb027 100644
> --- a/drivers/usb/dwc3/Kconfig
> +++ b/drivers/usb/dwc3/Kconfig
> @@ -67,6 +67,7 @@ config USB_DWC3_OMAP
> config USB_DWC3_EXYNOS
> tristate "Samsung Exynos Platform"
> depends on (ARCH_EXYNOS || COMPILE_TEST) && OF
> + select USB_XHCI_EXYNOS if USB_XHCI_PLATFORM
> default USB_DWC3
> help
> Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside,
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index c9bb93a2c81e..baa029ceede9 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1303,6 +1303,7 @@ static void dwc3_get_properties(struct dwc3 *dwc)
> &dwc->hsphy_interface);
> device_property_read_u32(dev, "snps,quirk-frame-length-adjustment",
> &dwc->fladj);
> + device_property_read_string(dev, "snps,xhci_variant", &dwc->hcd_name);
>
> dwc->dis_metastability_quirk = device_property_read_bool(dev,
> "snps,dis_metastability_quirk");
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 3dd783b889cb..1b8f5f5814a4 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -1176,6 +1176,7 @@ struct dwc3 {
> u8 tx_max_burst_prd;
>
> const char *hsphy_interface;
> + const char *hcd_name;
>
> unsigned connected:1;
> unsigned delayed_status:1;
> diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
> index c1e9ea621f41..4e847073e85e 100644
> --- a/drivers/usb/dwc3/dwc3-exynos.c
> +++ b/drivers/usb/dwc3/dwc3-exynos.c
> @@ -13,6 +13,7 @@
> #include <linux/slab.h>
> #include <linux/platform_device.h>
> #include <linux/clk.h>
> +#include <linux/dma-mapping.h>
> #include <linux/of.h>
> #include <linux/of_platform.h>
> #include <linux/regulator/consumer.h>
> @@ -35,22 +36,20 @@ struct dwc3_exynos {
>
> struct regulator *vdd33;
> struct regulator *vdd10;
> + struct platform_device *dwc3;
> };
>
> -static int dwc3_exynos_remove_child(struct device *dev, void *unused)
> -{
> - struct platform_device *pdev = to_platform_device(dev);
> -
> - platform_device_unregister(pdev);
> -
> - return 0;
> -}
> +static const struct property_entry dwc3_exynos_properties[] = {
> + PROPERTY_ENTRY_STRING("snps,xhci_variant", "exynos5-dwc3-xhci"),
> + {}
> +};
>
> static int dwc3_exynos_probe(struct platform_device *pdev)
> {
> struct dwc3_exynos *exynos;
> struct device *dev = &pdev->dev;
> - struct device_node *node = dev->of_node;
> + struct device_node *node = dev->of_node, *child;
> + struct platform_device *dwc3;
> const struct dwc3_exynos_driverdata *driver_data;
> int i, ret;
>
> @@ -109,21 +108,43 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
> goto vdd10_err;
> }
>
> - if (node) {
> - ret = of_platform_populate(node, NULL, NULL, dev);
> - if (ret) {
> - dev_err(dev, "failed to add dwc3 core\n");
> - goto populate_err;
> - }
> - } else {
> - dev_err(dev, "no device node, failed to add dwc3 core\n");
> - ret = -ENODEV;
> - goto populate_err;
> + child = of_get_next_child(node, NULL);
> + if (!child) {
> + dev_err(dev, "Failed to find DWC3 core device node\n");
> + goto dwc3_child_err;
> + }
> +
> + dwc3 = of_device_alloc(child, NULL, dev);
> + if (!dwc3) {
> + dev_err(dev, "Failed to allocate DWC3 core device\n");
> + goto dwc3_alloc_err;
> + }
> +
> + dwc3->dev.coherent_dma_mask = DMA_BIT_MASK(32);
> + dwc3->dev.dma_mask = &dwc3->dev.coherent_dma_mask;
> + dwc3->dev.bus = &platform_bus_type;
> +
> + ret = platform_device_add_properties(dwc3, dwc3_exynos_properties);
> + if (ret < 0) {
> + dev_err(dev, "Failed to add properties to DWC3 device\n");
> + goto dwc3_props_err;
> + }
> +
> + ret = of_device_add(dwc3);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to register DWC3 core device\n");
> + goto dwc3_props_err;
> }
> + exynos->dwc3 = dwc3;
> + of_node_put(child);
>
> return 0;
>
> -populate_err:
> +dwc3_props_err:
> + platform_device_put(dwc3);
> +dwc3_alloc_err:
> + of_node_put(child);
> +dwc3_child_err:
> regulator_disable(exynos->vdd10);
> vdd10_err:
> regulator_disable(exynos->vdd33);
> @@ -142,7 +163,8 @@ static int dwc3_exynos_remove(struct platform_device *pdev)
> struct dwc3_exynos *exynos = platform_get_drvdata(pdev);
> int i;
>
> - device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child);
> + of_device_unregister(exynos->dwc3);
> + platform_device_put(exynos->dwc3);
>
> for (i = exynos->num_clks - 1; i >= 0; i--)
> clk_disable_unprepare(exynos->clks[i]);
> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
> index f55947294f7c..b526d0c78c3b 100644
> --- a/drivers/usb/dwc3/host.c
> +++ b/drivers/usb/dwc3/host.c
> @@ -71,7 +71,7 @@ int dwc3_host_init(struct dwc3 *dwc)
> dwc->xhci_resources[1].flags = res->flags;
> dwc->xhci_resources[1].name = res->name;
>
> - xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO);
> + xhci = platform_device_alloc(dwc->hcd_name, PLATFORM_DEVID_AUTO);
> if (!xhci) {
> dev_err(dwc->dev, "couldn't allocate xHCI device\n");
> return -ENOMEM;
> --
> 2.17.1
>
Powered by blists - more mailing lists