linux-kernel - Re: [PATCH v1 26/50] ARM: dts: exynos: align NOC100 bus OPPs in Exynos5420

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <8ed83c77-57f7-78a4-e437-714cfc7b5c58@partner.samsung.com>
Date:   Wed, 17 Jul 2019 12:27:38 +0200
From:   Lukasz Luba <l.luba@...tner.samsung.com>
To:     Krzysztof Kozlowski <krzk@...nel.org>
Cc:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        "linux-samsung-soc@...r.kernel.org" 
        <linux-samsung-soc@...r.kernel.org>, linux-clk@...r.kernel.org,
        mturquette@...libre.com, sboyd@...nel.org,
        Bartłomiej Żołnierkiewicz 
        <b.zolnierkie@...sung.com>, kgene@...nel.org, mark.rutland@....com,
        robh+dt@...nel.org, Chanwoo Choi <cw00.choi@...sung.com>,
        kyungmin.park@...sung.com, Andrzej Hajda <a.hajda@...sung.com>,
        Marek Szyprowski <m.szyprowski@...sung.com>,
        s.nawrocki@...sung.com, myungjoo.ham@...sung.com
Subject: Re: [PATCH v1 26/50] ARM: dts: exynos: align NOC100 bus OPPs in
 Exynos5420


On 7/17/19 12:10 PM, Krzysztof Kozlowski wrote:
> On Mon, 15 Jul 2019 at 14:44, Lukasz Luba <l.luba@...tner.samsung.com> wrote:
>>
>> The NOC100 has a parent which clock rate is set tot 400MHz. The OPPs which
>> are not possible to set are removed and new one is added.
> 
> I think it is just NOC bus... or are there more of such and this is 100 MHz one?
Yes, there is a bus NOC100 with a dedicated clock tree in the HW (with
3 muxes and one divider), which makes possible to take different PLL as
a source then WCORE have, divide the rate from it and even switch for a
while to alternative stable PLL (on the 2nd mux to SPLL (after a
divider)) to wait for main PLL rate change stability delay. Max rate is
limited to 100MHz for this NOC100 bus.

Regards,
Lukasz
> 
> Best regards,
> Krzysztof
> 
>