linux-kernel - RE: [EXT] Re: [v5,2/2] Documentation: dt: binding: rtc: add binding for ftm alarm driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <DB7PR04MB4490BC5DDEC821E4DC25421C8FC80@DB7PR04MB4490.eurprd04.prod.outlook.com>
Date:   Thu, 18 Jul 2019 03:33:18 +0000
From:   Biwen Li <biwen.li@....com>
To:     Rob Herring <robh+dt@...nel.org>
CC:     Alessandro Zummo <a.zummo@...ertech.it>,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Leo Li <leoyang.li@....com>,
        "open list:REAL TIME CLOCK (RTC) SUBSYSTEM" 
        <linux-rtc@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Xiaobo Xie <xiaobo.xie@....com>,
        Jiafei Pan <jiafei.pan@....com>, Ran Wang <ran.wang_1@....com>,
        Mark Rutland <mark.rutland@....com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Subject: RE: [EXT] Re: [v5,2/2] Documentation: dt: binding: rtc: add binding
 for ftm alarm driver

> >
> > >
> > > Caution: EXT Email
> > >
> > > On Tue, Jul 16, 2019 at 4:26 AM Biwen Li <biwen.li@....com> wrote:
> > > >
> > > > The patch adds binding for ftm alarm driver
> > >
> > > Bindings are for h/w, not drivers...
> > >
> > > 'dt-bindings: rtc: ...' for the subject prefix.
> > I will correct it in v6.
> > >
> > > >
> > > > Signed-off-by: Biwen Li <biwen.li@....com>
> > > > ---
> > > > Change in v5:
> > > >     - None
> > > >
> > > > Change in v4:
> > > >     - add note about dts and kernel options
> > > >     - add aliases in example
> > > >
> > > > Change in v3:
> > > >         - remove reg-names property
> > > >         - correct cells number
> > > >
> > > > Change in v2:
> > > >         - replace ls1043a with ls1088a as example
> > > >         - add rcpm node and fsl,rcpm-wakeup property
> > > >
> > > >
> > > >  .../bindings/rtc/rtc-fsl-ftm-alarm.txt        | 49
> +++++++++++++++++++
> > > >  1 file changed, 49 insertions(+)
> > > >  create mode 100644
> > > > Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
> > > >
> > > > diff --git
> > > > a/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
> > > > b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
> > > > new file mode 100644
> > > > index 000000000000..fb018065406c
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/rtc/rtc-fsl-ftm-alarm.txt
> > > > @@ -0,0 +1,49 @@
> > > > +Freescale FlexTimer Module (FTM) Alarm
> > > > +
> > > > +Note:
> > > > +- The driver depends on RCPM driver
> > > > +  to wake up system in sleep.
> > > > +- Need stop using RTC_HCTOSYS or use the DT aliases
> > > > +  to ensure the driver is not used as the primary RTC.
> > > > +  (Select DT aliases defaultly)
> > >
> > > This is Linux specific and not relevant to the binding.
> > Ok, I will remove all of the Note in v6.
> > >
> > > > +
> > > > +Required properties:
> > > > +- compatible : Should be "fsl,<chip>-ftm-alarm", the
> > > > +              supported chips include
> > > > +              "fsl,ls1012a-ftm-alarm"
> > > > +              "fsl,ls1021a-ftm-alarm"
> > > > +              "fsl,ls1028a-ftm-alarm"
> > > > +              "fsl,ls1043a-ftm-alarm"
> > > > +              "fsl,ls1046a-ftm-alarm"
> > > > +              "fsl,ls1088a-ftm-alarm"
> > > > +              "fsl,ls208xa-ftm-alarm"
> > > > +- reg : Specifies base physical address and size of the register
> > > > +sets for the
> > > > +  FlexTimer Module and base physical address of IP Powerdown
> > > > +Exception Control
> > > > +  Register.
> > > > +- interrupts : Should be the FlexTimer Module interrupt.
> > > > +- fsl,rcpm-wakeup property and rcpm node : Please refer
> > > > +       Documentation/devicetree/bindings/soc/fsl/rcpm.txt
> > > > +
> > > > +Optional properties:
> > > > +- big-endian: If the host controller is big-endian mode, specify this
> property.
> > > > +  The default endian mode is little-endian.
> > > > +
> > > > +Example:
> > > > +aliases {
> > > > +       ...
> > > > +       rtc1 = ftm_alarm0; /* Use flextimer alarm driver as /dev/rtc1 */
> > > > +       ...
> > > > +};
> > >
> > > Drop the aliases part. It's not going to work when this is converted
> > > to DT schema and the comment is Linux specific.
> > Sorry,I can't drop the aliases part. If any user uses the alarm driver
> > as rtc0, the user will get wrong time from /dev/rtc0.It is very important.
> 
> I just mean don't put it in the example. You can use it in your dts file.
Thank you so much,I need put it in the example for a note(Please not use it as rtc0).
I use it as a note in the example to avoid that someone use FlexTimer module as rtc0.