linux-kernel - [PATCH v5 0/2] Add basic support for pico-pi-imx8m

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190719121430.9318-1-andradanciu1997@gmail.com>
Date:   Fri, 19 Jul 2019 15:14:28 +0300
From:   andradanciu1997 <andradanciu1997@...il.com>
To:     shawnguo@...nel.org
Cc:     robh+dt@...nel.org, mark.rutland@....com, s.hauer@...gutronix.de,
        kernel@...gutronix.de, festevam@...il.com, linux-imx@....com,
        manivannan.sadhasivam@...aro.org, andrew.smirnov@...il.com,
        j.neuschaefer@....net, andradanciu1997@...il.com,
        aisheng.dong@....com, leoyang.li@....com, l.stach@...gutronix.de,
        pankaj.bansal@....com, bhaskar.upadhaya@....com,
        pramod.kumar_1@....com, angus@...ea.ca, richard.hu@...hnexion.com,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v5 0/2] Add basic support for pico-pi-imx8m

Add support for TechNexion PICO-PI-IMX8M based on patches from Richard Hu
Datasheet is at: https://s3.us-east-2.amazonaws.com/technexion/datasheets/picopiimx8m.pdf

Changes since v4:
 - removed #address-cells and  #size-cells from regulators node

Changes since v3:
 - renamed pico-pi-8m.dts to imx8mq-pico-pi.dts
 - moved iomuxc node as the last one
 - removed pinctrl-assert-gpios property from fec1 node
 - removed at803x,led-act-blind-workaround, at803x,eee-disabled
   properties from mdio node
 - added pinctrl-names = "default" to i2c1 node
 - changed bd71837 pmic support properties according to
   Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
 - removed A53_0 node

Changes since v2:
 - changed PICO-PI-8M bord compatible from wand,imx8mq-pico-pi to
   technexion,pico-pi-imx8m
 - removed bootargs property
 - removed regulators node and put fixed regulator directly under root node
 - changed node name from usb_otg_vbus to regulator-usb-otg-vbus
 - removed pinctrl-names property from iomuxc node
 - removed wand-pi-8m container node
 - sorted pinctrl nodes alphabetically
 - removed tusb320_irqgrp, tusb320_irqgrp nodes because there is no upstream
   driver
 - changed properties' order in usb_dwc3_1 node

Changes since v1:
 - renamed wandboard-pi-8m.dts to pico-pi-8m.dts
 - removed pinctrl_csi1, pinctrl_wifi_ctrl
 - used generic name for pmic
 - removed gpo node
 - delete regulator-virtuals node
 - remove always-on property from buck1-8 and ldo3-7
 - remove pmic-buck-uses-i2c-dvs property for buck1-4

Andra Danciu (1):
  dt-bindings: arm: fsl: Add the pico-pi-imx8m board

Richard Hu (1):
  arm64: dts: fsl: pico-pi: Add a device tree for the PICO-PI-IMX8M

 Documentation/devicetree/bindings/arm/fsl.yaml   |   1 +
 arch/arm64/boot/dts/freescale/Makefile           |   1 +
 arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts | 414 +++++++++++++++++++++++
 3 files changed, 416 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts

-- 
2.11.0