linux-kernel - Re: [PATCH v2 1/2] arm64: dts: imx8mq: Add MIPI D-PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 21 Jul 2019 13:47:07 +0200
From:   Guido Günther <agx@...xcpu.org>
To:     Abel Vesa <abel.vesa@....com>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        dl-linux-imx <linux-imx@....com>, Pavel Machek <pavel@....cz>,
        "Angus Ainslie (Purism)" <angus@...ea.ca>,
        Lucas Stach <l.stach@...gutronix.de>,
        Anson Huang <anson.huang@....com>,
        Carlo Caione <ccaione@...libre.com>,
        Andrey Smirnov <andrew.smirnov@...il.com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 1/2] arm64: dts: imx8mq: Add MIPI D-PHY

Hi Abel,
On Mon, Jul 15, 2019 at 11:10:27AM +0000, Abel Vesa wrote:
> On 19-07-15 12:43:05, Guido Günther wrote:
> > Add a node for the Mixel MIPI D-PHY, "disabled" by default.
> > 
> > Signed-off-by: Guido Günther <agx@...xcpu.org>
> > Acked-by: Angus Ainslie (Purism) <angus@...ea.ca>
> > ---
> >  arch/arm64/boot/dts/freescale/imx8mq.dtsi | 13 +++++++++++++
> >  1 file changed, 13 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > index d09b808eff87..891ee7578c2d 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > @@ -728,6 +728,19 @@
> >  				status = "disabled";
> >  			};
> >  
> > +			dphy: dphy@...00300 {
> > +				compatible = "fsl,imx8mq-mipi-dphy";
> > +				reg = <0x30a00300 0x100>;
> > +				clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
> > +				clock-names = "phy_ref";
> > +				assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
> > +				assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>;
> > +				assigned-clock-rates = <24000000>;
> 
> We have the following in the clk-imx8mq in the vendor tree:
> 
> 	clk_set_parent(clks[IMX8MQ_VIDEO_PLL1_BYPASS], clks[IMX8MQ_VIDEO_PLL1]);
> 
> This unbypasses the video pll 1. And then we also have this:
> 
> 	/* config video_pll1 clock */
> 	clk_set_parent(clks[IMX8MQ_VIDEO_PLL1_REF_SEL], clks[IMX8MQ_CLK_27M]);
> 	clk_set_rate(clks[IMX8MQ_VIDEO_PLL1], 593999999);

We don't have anything like this in our tree. This is our current clock
tree in that area which is setup by either the lcdif or dcss DT:

 osc_25m                             10       12        0    25000000          0     0  50000
    video_pll1_ref_sel                1        1        0    25000000          0     0  50000
       video_pll1_ref_div             1        1        0     5000000          0     0  50000
          video_pll1                  1        1        0   593999998          0     0  50000
             video_pll1_bypass        1        1        0   593999998          0     0  50000
                video_pll1_out        2        2        0   593999998          0     0  50000
                   dsi_phy_ref        1        1        0    23760000          0     0  50000

e.g. for lcdif we have:

	lcdif: lcdif@...20000 {
		...
		clock-names = "pix";
		assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
				  <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
				  <&clk IMX8MQ_CLK_LCDIF_PIXEL>,
				  <&clk IMX8MQ_VIDEO_PLL1>;
		assigned-clock-parents = <&clk IMX8MQ_CLK_25M>,
				  <&clk IMX8MQ_VIDEO_PLL1>,
				  <&clk IMX8MQ_VIDEO_PLL1_OUT>;
		assigned-clock-rates = <0>, <0>, <0>, <594000000>;
		...
	};

Do we want to add this add for dphy and lcdif?
Cheers,
 -- Guido

> But none of that is acceptable upstream since the clock provider should not
> use clock consumer API.
> 
> So please update the assigned-clock* properties to something like this:
> 				assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>,
> 						  <&clk IMX8MQ_VIDEO_PLL1_BYPASS>,
> 						  <&clk IMX8MQ_CLK_DSI_PHY_REF>,
> 						  <&clk IMX8MQ_VIDEO_PLL1>;
> 				assigned-clock-parents = <&clk IMX8MQ_CLK_27M>,
> 							 <&clk IMX8MQ_VIDEO_PLL1>,
> 							 <&clk IMX8MQ_VIDEO_PLL1_OUT>
> 							 <0>;
> 				assigned-clock-rates = <0>,
> 						       <0>,
> 						       <24000000>,             
> 						       <593999999>;
> 
> I've written this without testing, so please do test it on your setup.

> 
> > +				#phy-cells = <0>;
> > +				power-domains = <&pgc_mipi>;
> > +				status = "disabled";
> > +			};
> > +
> >  			i2c1: i2c@...20000 {
> >  				compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
> >  				reg = <0x30a20000 0x10000>;
> > -- 
> > 2.20.1
> >