linux-kernel - [PATCH] leds: ktd2692: Fix a typo in the name of a constant

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190721210539.25669-1-christophe.jaillet@wanadoo.fr>
Date:   Sun, 21 Jul 2019 23:05:39 +0200
From:   Christophe JAILLET <christophe.jaillet@...adoo.fr>
To:     jacek.anaszewski@...il.com, pavel@....cz, dmurphy@...com
Cc:     linux-leds@...r.kernel.org, linux-kernel@...r.kernel.org,
        kernel-janitors@...r.kernel.org,
        Christophe JAILLET <christophe.jaillet@...adoo.fr>
Subject: [PATCH] leds: ktd2692: Fix a typo in the name of a constant

There is a typo in KTD2962_MM_MIN_CURR_THRESHOLD_SCALE. 6 and 9 are
switched in 2962.

Define and use KTD2692_MM_MIN_CURR_THRESHOLD_SCALE instead.

Signed-off-by: Christophe JAILLET <christophe.jaillet@...adoo.fr>
---
 drivers/leds/leds-ktd2692.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/leds/leds-ktd2692.c b/drivers/leds/leds-ktd2692.c
index 45296aaca9da..44db748c570e 100644
--- a/drivers/leds/leds-ktd2692.c
+++ b/drivers/leds/leds-ktd2692.c
@@ -22,7 +22,7 @@
 /* Value related the movie mode */
 #define KTD2692_MOVIE_MODE_CURRENT_LEVELS	16
 #define KTD2692_MM_TO_FL_RATIO(x)		((x) / 3)
-#define KTD2962_MM_MIN_CURR_THRESHOLD_SCALE	8
+#define KTD2692_MM_MIN_CURR_THRESHOLD_SCALE	8
 
 /* Value related the flash mode */
 #define KTD2692_FLASH_MODE_TIMEOUT_LEVELS	8
@@ -253,7 +253,7 @@ static void ktd2692_setup(struct ktd2692_context *led)
 	ktd2692_expresswire_reset(led);
 	gpiod_direction_output(led->aux_gpio, KTD2692_LOW);
 
-	ktd2692_expresswire_write(led, (KTD2962_MM_MIN_CURR_THRESHOLD_SCALE - 1)
+	ktd2692_expresswire_write(led, (KTD2692_MM_MIN_CURR_THRESHOLD_SCALE - 1)
 				 | KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE);
 	ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45)
 				 | KTD2692_REG_FLASH_CURRENT_BASE);
-- 
2.20.1