[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2990f6b1-a43f-d910-6743-1c13e029ce36@gmail.com>
Date: Mon, 22 Jul 2019 01:18:44 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Sowjanya Komatineni <skomatineni@...dia.com>,
thierry.reding@...il.com, jonathanh@...dia.com, tglx@...utronix.de,
jason@...edaemon.net, marc.zyngier@....com,
linus.walleij@...aro.org, stefan@...er.ch, mark.rutland@....com
Cc: pdeschrijver@...dia.com, pgaikwad@...dia.com, sboyd@...nel.org,
linux-clk@...r.kernel.org, linux-gpio@...r.kernel.org,
jckuo@...dia.com, josephl@...dia.com, talho@...dia.com,
linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org,
mperttunen@...dia.com, spatra@...dia.com, robh+dt@...nel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH V6 05/21] clk: tegra: pllout: Save and restore pllout
context
21.07.2019 22:40, Sowjanya Komatineni пишет:
> This patch implements save and restore of pllout context.
>
> During system suspend, core power goes off and looses the settings
> of the Tegra CAR controller registers.
>
> So during suspend entry the state of pllout is saved and on resume
> it is restored back to have pllout in same state as before suspend.
>
> pllout rate is saved and restore in clock divider so it will be at
> same rate as before suspend when pllout state is restored.
>
> Acked-by: Thierry Reding <treding@...dia.com>
> Signed-off-by: Sowjanya Komatineni <skomatineni@...dia.com>
> ---
> drivers/clk/tegra/clk-pll-out.c | 28 ++++++++++++++++++++++++++++
> drivers/clk/tegra/clk-tegra210.c | 3 ++-
> drivers/clk/tegra/clk.h | 9 +++++++++
> 3 files changed, 39 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/tegra/clk-pll-out.c b/drivers/clk/tegra/clk-pll-out.c
> index 35f2bf00e1e6..8f26a7e3e579 100644
> --- a/drivers/clk/tegra/clk-pll-out.c
> +++ b/drivers/clk/tegra/clk-pll-out.c
> @@ -69,10 +69,38 @@ static void clk_pll_out_disable(struct clk_hw *hw)
> spin_unlock_irqrestore(pll_out->lock, flags);
> }
>
> +static int tegra_clk_pll_out_save_context(struct clk_hw *hw)
> +{
> + struct tegra_clk_pll_out *pll_out = to_clk_pll_out(hw);
> +
> + if (pll_out->flags & TEGRA_PLLRE_OUT)
> + pll_out->pllout_ctx = readl_relaxed(pll_out->reg);
> + else
> + pll_out->pllout_ctx = clk_hw_get_rate(hw);
This is unused?
> + return 0;
> +}
> +
> +static void tegra_clk_pll_out_restore_context(struct clk_hw *hw)
> +{
> + struct tegra_clk_pll_out *pll_out = to_clk_pll_out(hw);
> +
> + if (pll_out->flags & TEGRA_PLLRE_OUT) {
> + writel_relaxed(pll_out->pllout_ctx, pll_out->reg);
> + } else {
> + if (!__clk_get_enable_count(hw->clk))
> + clk_pll_out_disable(hw);
> + else
> + clk_pll_out_enable(hw);
> + }
> +}
> +
> const struct clk_ops tegra_clk_pll_out_ops = {
> .is_enabled = clk_pll_out_is_enabled,
> .enable = clk_pll_out_enable,
> .disable = clk_pll_out_disable,
> + .save_context = tegra_clk_pll_out_save_context,
> + .restore_context = tegra_clk_pll_out_restore_context,
> };
>
> struct clk *tegra_clk_register_pll_out(const char *name,
> diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
> index df172d5772d7..4721ee030d1c 100644
> --- a/drivers/clk/tegra/clk-tegra210.c
> +++ b/drivers/clk/tegra/clk-tegra210.c
> @@ -3200,7 +3200,8 @@ static void __init tegra210_pll_init(void __iomem *clk_base,
> 8, 8, 1, NULL);
> clk = tegra_clk_register_pll_out("pll_re_out1", "pll_re_out1_div",
> clk_base + PLLRE_OUT1, 1, 0,
> - CLK_SET_RATE_PARENT, 0, NULL);
> + CLK_SET_RATE_PARENT, TEGRA_PLLRE_OUT,
> + NULL);
> clks[TEGRA210_CLK_PLL_RE_OUT1] = clk;
>
> /* PLLE */
> diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
> index 83623f5f55f3..fb29a8c27873 100644
> --- a/drivers/clk/tegra/clk.h
> +++ b/drivers/clk/tegra/clk.h
> @@ -439,6 +439,12 @@ struct clk *tegra_clk_register_pllu_tegra210(const char *name,
> * @rst_bit_idx: bit to reset PLL divider
> * @lock: register lock
> * @flags: hardware-specific flags
> + * @pllout_ctx: pllout context to save and restore during suspend
> + * and resume
> + *
> + * Flags:
> + * TEGRA_PLLRE_OUT - This flag indicates that it is PLLRE_OUT and is used to
> + * identify PLLRE_OUT during clk_pll_out save and restore.
> */
> struct tegra_clk_pll_out {
> struct clk_hw hw;
> @@ -447,8 +453,11 @@ struct tegra_clk_pll_out {
> u8 rst_bit_idx;
> spinlock_t *lock;
> u8 flags;
> + unsigned int pllout_ctx;
u32
> };
>
> +#define TEGRA_PLLRE_OUT BIT(0)
> +
> #define to_clk_pll_out(_hw) container_of(_hw, struct tegra_clk_pll_out, hw)
>
> extern const struct clk_ops tegra_clk_pll_out_ops;
>
Powered by blists - more mailing lists