Message-Id: <20190722193939.125578-1-dianders@chromium.org>
Date:   Mon, 22 Jul 2019 12:39:37 -0700
From:   Douglas Anderson <dianders@...omium.org>
To:     Ulf Hansson <ulf.hansson@...aro.org>,
        Kalle Valo <kvalo@...eaurora.org>,
        Adrian Hunter <adrian.hunter@...el.com>
Cc:     Ganapathi Bhat <gbhat@...vell.com>, linux-wireless@...r.kernel.org,
        Andreas Fenkart <afenkart@...il.com>,
        Brian Norris <briannorris@...omium.org>,
        Amitkumar Karwar <amitkarwar@...il.com>,
        linux-rockchip@...ts.infradead.org,
        Wolfram Sang <wsa+renesas@...g-engineering.com>,
        Nishant Sarmukadam <nishants@...vell.com>,
        netdev@...r.kernel.org, Avri Altman <avri.altman@....com>,
        linux-mmc@...r.kernel.org, davem@...emloft.net,
        Xinming Hu <huxinming820@...il.com>,
        Douglas Anderson <dianders@...omium.org>,
        linux-kernel@...r.kernel.org, Thomas Gleixner <tglx@...utronix.de>,
        Kate Stewart <kstewart@...uxfoundation.org>
Subject: [PATCH v2 0/2] mmc: core: Fix Marvell WiFi reset by adding SDIO API to replug card

As talked about in the thread at:

http://lkml.kernel.org/r/CAD=FV=X7P2F1k_zwHc0mbtfk55-rucTz_GoDH=PL6zWqKYcpuw@mail.gmail.com

...when the Marvell WiFi card tries to reset itself it kills
Bluetooth.  It was observed that we could re-init the card properly by
unbinding / rebinding the host controller.  It was also observed that
in the downstream Chrome OS codebase the solution used was
mmc_remove_host() / mmc_add_host(), which is similar to the solution
in this series.

So far I've only done testing of this series using the reset test
source that can be simulated via sysfs.  Specifically I ran this test:

for i in $(seq 1000); do
  echo "LOOP $i --------"
  echo 1 > /sys/kernel/debug/mwifiex/mlan0/reset

  while true; do
    if ! ping -w15 -c1 "${GW}" >/dev/null 2>&1; then
      fail=$(( fail + 1 ))
      echo "Fail WiFi ${fail}"
      if [[ ${fail} == 3 ]]; then
        exit 1
      fi
    else
      fail=0
      break
    fi
  done

  hciconfig hci0 down
  sleep 1
  if ! hciconfig hci0 up; then
    echo "Fail BT"
    exit 1
  fi
done

I ran this several times and got several hundred iterations each
before a failure.  When I saw failures:

* Once I saw a "Fail BT"; manually resetting the card again fixed it.
  I didn't give it time to see if it would have detected this
  automatically.
* Once I saw the ping fail because (for some reason) my device only
  got an IPv6 address from my router and the IPv4 ping failed.  I
  changed my script to use 'ping6' to see if that would help.
* Once I saw the ping fail because the higher level network stack
  ("shill" in my case) seemed to crash.  A few minutes later the
  system recovered itself automatically.  https://crbug.com/984593 if
  you want more details.
* Sometimes while I was testing I saw "Fail WiFi 1" indicating a
  transitory failure.  Usually this was an association failure, but in
  one case I saw the device do "Firmware wakeup failed" after I
  triggered the reset.  This caused the driver to trigger a re-reset
  of itself which eventually recovered things.  This was good because
  it was an actual test of the normal reset flow (not the one
  triggered via sysfs).

Changes in v2:
- s/routnine/routine (Brian Norris, Matthias Kaehlcke).
- s/contining/containing (Matthias Kaehlcke).
- Add Matthias Reviewed-by tag.
- Removed clear_bit() calls and old comment (Brian Norris).
- Explicit CC of Andreas Fenkart.
- Explicit CC of Brian Norris.
- Add "Fixes" pointing at the commit Brian talked about.
- Add Brian's Reviewed-by tag.

Douglas Anderson (2):
  mmc: core: Add sdio_trigger_replug() API
  mwifiex: Make use of the new sdio_trigger_replug() API to reset

 drivers/mmc/core/core.c                     | 28 +++++++++++++++++++--
 drivers/mmc/core/sdio_io.c                  | 20 +++++++++++++++
 drivers/net/wireless/marvell/mwifiex/sdio.c | 16 +-----------
 include/linux/mmc/host.h                    | 15 ++++++++++-
 include/linux/mmc/sdio_func.h               |  2 ++
 5 files changed, 63 insertions(+), 18 deletions(-)

-- 
2.22.0.657.g960e92d24f-goog

Powered by blists - more mailing lists