| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190722093241.GC15612@e110455-lin.cambridge.arm.com>
Date: Mon, 22 Jul 2019 10:32:41 +0100
From: Liviu Dudau <liviu.dudau@....com>
To: Wen He <wen.he_1@....com>
Cc: "dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"brian.starkey@....com" <brian.starkey@....com>,
"airlied@...ux.ie" <airlied@...ux.ie>,
"daniel@...ll.ch" <daniel@...ll.ch>, Leo Li <leoyang.li@....com>
Subject: Re: [EXT] Re: [v2 1/3] drm/arm/mali-dp: Add display QoS interface
configuration for Mali DP500
On Mon, Jul 22, 2019 at 02:12:08AM +0000, Wen He wrote:
>
>
> > -----Original Message-----
> > From: Liviu Dudau <liviu.dudau@....com>
> > Sent: 2019年7月19日 19:46
> > To: Wen He <wen.he_1@....com>
> > Cc: dri-devel@...ts.freedesktop.org; linux-kernel@...r.kernel.org;
> > brian.starkey@....com; airlied@...ux.ie; daniel@...ll.ch; Leo Li
> > <leoyang.li@....com>
> > Subject: [EXT] Re: [v2 1/3] drm/arm/mali-dp: Add display QoS interface
> > configuration for Mali DP500
> >
> > Caution: EXT Email
> >
> > On Fri, Jul 19, 2019 at 05:54:45PM +0800, Wen He wrote:
> > > Configure the display Quality of service (QoS) levels priority if the
> > > optional property node "arm,malidp-aqros-value" is defined in DTS file.
> > >
> > > QoS signaling using AQROS and AWQOS AXI interface signals, the AQROS
> > > is driven from the "RQOS" register, so needed to program the RQOS
> > > register to avoid the 4k resolution flicker issue on the LS1028A platform.
> > >
> > > Signed-off-by: Wen He <wen.he_1@....com>
> > > ---
> > > change in v2:
> > > - modify some content based on feedback from maintainers
> > >
> > > drivers/gpu/drm/arm/malidp_drv.c | 6 ++++++
> > > drivers/gpu/drm/arm/malidp_hw.c | 13 +++++++++++++
> > > drivers/gpu/drm/arm/malidp_hw.h | 3 +++
> > > drivers/gpu/drm/arm/malidp_regs.h | 10 ++++++++++
> > > 4 files changed, 32 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/arm/malidp_drv.c
> > > b/drivers/gpu/drm/arm/malidp_drv.c
> > > index f25ec4382277..61c49a0668a7 100644
> > > --- a/drivers/gpu/drm/arm/malidp_drv.c
> > > +++ b/drivers/gpu/drm/arm/malidp_drv.c
> > > @@ -818,6 +818,12 @@ static int malidp_bind(struct device *dev)
> > >
> > > malidp->core_id = version;
> > >
> > > + ret = of_property_read_u32(dev->of_node,
> > > + "arm,malidp-arqos-value",
> > > + &hwdev->arqos_value);
> > > + if (ret)
> > > + hwdev->arqos_value = 0x0;
> >
> > Is zero the default value that you want? I thought it was 0x00010001.
>
> Actually, the register default value always is 0x00010001(can be found in RM document).
Exactly, but with your code you are overwriting it to 0 if the DT doesn't have
the arm,malidp-arqos-value property.
>
> >
> > > +
> > > /* set the number of lines used for output of RGB data */
> > > ret = of_property_read_u8_array(dev->of_node,
> > > "arm,malidp-output-port-lines",
> > > diff --git a/drivers/gpu/drm/arm/malidp_hw.c
> > > b/drivers/gpu/drm/arm/malidp_hw.c index 50af399d7f6f..323683b1e9f7
> > > 100644
> > > --- a/drivers/gpu/drm/arm/malidp_hw.c
> > > +++ b/drivers/gpu/drm/arm/malidp_hw.c
> > > @@ -374,6 +374,19 @@ static void malidp500_modeset(struct
> > malidp_hw_device *hwdev, struct videomode *
> > > malidp_hw_setbits(hwdev, MALIDP_DISP_FUNC_ILACED,
> > MALIDP_DE_DISPLAY_FUNC);
> > > else
> > > malidp_hw_clearbits(hwdev, MALIDP_DISP_FUNC_ILACED,
> > > MALIDP_DE_DISPLAY_FUNC);
> > > +
> > > + /*
> > > + * Program the RQoS register to avoid 4k resolution flicker
> > > + * on the LS1028A.
> > > + */
> > > + if (hwdev->arqos_value) {
> > > + val = hwdev->arqos_value;
> > > +
> > > + if (mode->pixelclock == 594000000)
> >
> > If I remember correctly, you declare the pixelclocks in the device tree, so I
> > wonder if this is needed here. We should just set what value was in the DT
> > regardless of the pixelclock, and then you manipulate the DT to choose one of
> > your fixed resolutions and also set the QoS value.
>
> Yes, you remember correctly, but
> 1. declare the pixelclocks in the device tree.
> About this, I was hoping to discuss it with you. I want to implement another patch
> that just declare 27MHz reference clock in the device tree and add a fake clock subsystem
> to enable/display prepare to set PLL. I am thinking what to do next.
> As I remember, I sent out a patch that "Disable checking for required pixel clock",
> I think should be cancel it.
>
> 2. declare the fixed resolutions list in DTS.
> Yes, Although I put four resolutions for supported list in DTS file, but this just a
> workaround that If not enable EDID OR EDID is not available. Once EDID is enabled,
> these resolutions list declare will be remove in DTS. so we can't use it as a condition
> to set the QoS value.
3. Actually enable the clock provider. I've had a look at the public
documentation and it looks like the the pixelclock is provided by an IDT VersaClock 5
generator, for which there is a kernel driver. I've started playing with it but got
pulled back by other more immediate tasks.
Anyway, what I was trying to hint was that putting in the code the exact pixelclock
value might not be the best thing. In my view, pixelclock reflects the need for
a certain bandwidth, with is usually a product of output (number of pixels) and
refresh frequency. I'm guessing going above 4k@60 will also trigger the
flicker, but with your patch we will not react correctly.
Best regards,
Liviu
>
> Best Regards,
> Wen
>
> >
> > Best regards,
> > Liviu
> >
> > > + malidp_hw_setbits(hwdev, val,
> > MALIDP500_RQOS_QUALITY);
> > > + else
> > > + malidp_hw_clearbits(hwdev, val,
> > MALIDP500_RQOS_QUALITY);
> > > + }
> > > }
> > >
> > > int malidp_format_get_bpp(u32 fmt)
> > > diff --git a/drivers/gpu/drm/arm/malidp_hw.h
> > > b/drivers/gpu/drm/arm/malidp_hw.h index 968a65eed371..e4c36bc90bda
> > > 100644
> > > --- a/drivers/gpu/drm/arm/malidp_hw.h
> > > +++ b/drivers/gpu/drm/arm/malidp_hw.h
> > > @@ -251,6 +251,9 @@ struct malidp_hw_device {
> > >
> > > /* size of memory used for rotating layers, up to two banks available
> > */
> > > u32 rotation_memory[2];
> > > +
> > > + /* priority level of RQOS register used for driven the ARQOS signal */
> > > + u32 arqos_value;
> > > };
> > >
> > > static inline u32 malidp_hw_read(struct malidp_hw_device *hwdev, u32
> > > reg) diff --git a/drivers/gpu/drm/arm/malidp_regs.h
> > > b/drivers/gpu/drm/arm/malidp_regs.h
> > > index 993031542fa1..514c50dcb74d 100644
> > > --- a/drivers/gpu/drm/arm/malidp_regs.h
> > > +++ b/drivers/gpu/drm/arm/malidp_regs.h
> > > @@ -210,6 +210,16 @@
> > > #define MALIDP500_CONFIG_VALID 0x00f00
> > > #define MALIDP500_CONFIG_ID 0x00fd4
> > >
> > > +/*
> > > + * The quality of service (QoS) register on the DP500. RQOS register
> > > +values
> > > + * are driven by the ARQOS signal, using AXI transacations, dependent
> > > +on the
> > > + * FIFO input level.
> > > + * The RQOS register can also set QoS levels for:
> > > + * - RED_ARQOS @ A 4-bit signal value for close to underflow
> > conditions
> > > + * - GREEN_ARQOS @ A 4-bit signal value for normal conditions
> > > + */
> > > +#define MALIDP500_RQOS_QUALITY 0x00500
> > > +
> > > /* register offsets and bits specific to DP550/DP650 */
> > > #define MALIDP550_ADDR_SPACE_SIZE 0x10000
> > > #define MALIDP550_DE_CONTROL 0x00010
> > > --
> > > 2.17.1
> > >
> >
> > --
> > ====================
> > | I would like to |
> > | fix the world, |
> > | but they're not |
> > | giving me the |
> > \ source code! /
> > ---------------
> > ¯\_(ツ)_/¯
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
Powered by blists - more mailing lists