| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190722095425.14193-2-amergnat@baylibre.com>
Date: Mon, 22 Jul 2019 11:54:18 +0200
From: Alexandre Mergnat <amergnat@...libre.com>
To: jbrunet@...libre.com
Cc: khilman@...libre.com, sboyd@...nel.org, narmstrong@...libre.com,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
baylibre-upstreaming@...ups.io,
Alexandre Mergnat <amergnat@...libre.com>
Subject: [PATCH 1/8] clk: meson: g12a: move clock declaration to dependency order
This clock controller use the string comparison method to describe parent
relation between the clocks.
In order to migrate to clk_hw pointers, it is easier if the parent is
declared before being used. This patch just move the declaration to
facilitate the review of migration to the parent description method.
Signed-off-by: Alexandre Mergnat <amergnat@...libre.com>
---
drivers/clk/meson/g12a.c | 270 +++++++++++++++++++--------------------
1 file changed, 135 insertions(+), 135 deletions(-)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 7bc5566b66f7..cbd56b2e05d0 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -257,6 +257,64 @@ static struct clk_fixed_factor g12b_sys1_pll_div16 = {
},
};
+static struct clk_fixed_factor g12a_fclk_div2_div = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12a_fclk_div2 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_FIX_PLL_CNTL1,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "fclk_div2_div" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor g12a_fclk_div3_div = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3_div",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12a_fclk_div3 = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_FIX_PLL_CNTL1,
+ .bit_idx = 20,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "fclk_div3_div" },
+ .num_parents = 1,
+ /*
+ * This clock is used by the resident firmware and is required
+ * by the platform to operate correctly.
+ * Until the following condition are met, we need this clock to
+ * be marked as critical:
+ * a) Mark the clock used by a firmware resource, if possible
+ * b) CCF has a clock hand-off mechanism to make the sure the
+ * clock stays on until the proper driver comes along
+ */
+ .flags = CLK_IS_CRITICAL,
+ },
+};
+
/* Datasheet names this field as "premux0" */
static struct clk_regmap g12a_cpu_clk_premux0 = {
.data = &(struct clk_regmap_mux_data){
@@ -274,6 +332,23 @@ static struct clk_regmap g12a_cpu_clk_premux0 = {
},
};
+/* Datasheet names this field as "premux1" */
+static struct clk_regmap g12a_cpu_clk_premux1 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL0,
+ .mask = 0x3,
+ .shift = 16,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk_dyn1_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ IN_PREFIX "xtal",
+ "fclk_div2",
+ "fclk_div3" },
+ .num_parents = 3,
+ },
+};
+
/* Datasheet names this field as "mux0_divn_tcnt" */
static struct clk_regmap g12a_cpu_clk_mux0_div = {
.data = &(struct clk_regmap_div_data){
@@ -305,23 +380,6 @@ static struct clk_regmap g12a_cpu_clk_postmux0 = {
},
};
-/* Datasheet names this field as "premux1" */
-static struct clk_regmap g12a_cpu_clk_premux1 = {
- .data = &(struct clk_regmap_mux_data){
- .offset = HHI_SYS_CPU_CLK_CNTL0,
- .mask = 0x3,
- .shift = 16,
- },
- .hw.init = &(struct clk_init_data){
- .name = "cpu_clk_dyn1_sel",
- .ops = &clk_regmap_mux_ro_ops,
- .parent_names = (const char *[]){ IN_PREFIX "xtal",
- "fclk_div2",
- "fclk_div3" },
- .num_parents = 3,
- },
-};
-
/* Datasheet names this field as "Mux1_divn_tcnt" */
static struct clk_regmap g12a_cpu_clk_mux1_div = {
.data = &(struct clk_regmap_div_data){
@@ -1305,64 +1363,6 @@ static struct clk_regmap g12a_hdmi_pll = {
},
};
-static struct clk_fixed_factor g12a_fclk_div2_div = {
- .mult = 1,
- .div = 2,
- .hw.init = &(struct clk_init_data){
- .name = "fclk_div2_div",
- .ops = &clk_fixed_factor_ops,
- .parent_names = (const char *[]){ "fixed_pll" },
- .num_parents = 1,
- },
-};
-
-static struct clk_regmap g12a_fclk_div2 = {
- .data = &(struct clk_regmap_gate_data){
- .offset = HHI_FIX_PLL_CNTL1,
- .bit_idx = 24,
- },
- .hw.init = &(struct clk_init_data){
- .name = "fclk_div2",
- .ops = &clk_regmap_gate_ops,
- .parent_names = (const char *[]){ "fclk_div2_div" },
- .num_parents = 1,
- },
-};
-
-static struct clk_fixed_factor g12a_fclk_div3_div = {
- .mult = 1,
- .div = 3,
- .hw.init = &(struct clk_init_data){
- .name = "fclk_div3_div",
- .ops = &clk_fixed_factor_ops,
- .parent_names = (const char *[]){ "fixed_pll" },
- .num_parents = 1,
- },
-};
-
-static struct clk_regmap g12a_fclk_div3 = {
- .data = &(struct clk_regmap_gate_data){
- .offset = HHI_FIX_PLL_CNTL1,
- .bit_idx = 20,
- },
- .hw.init = &(struct clk_init_data){
- .name = "fclk_div3",
- .ops = &clk_regmap_gate_ops,
- .parent_names = (const char *[]){ "fclk_div3_div" },
- .num_parents = 1,
- /*
- * This clock is used by the resident firmware and is required
- * by the platform to operate correctly.
- * Until the following condition are met, we need this clock to
- * be marked as critical:
- * a) Mark the clock used by a firmware resource, if possible
- * b) CCF has a clock hand-off mechanism to make the sure the
- * clock stays on until the proper driver comes along
- */
- .flags = CLK_IS_CRITICAL,
- },
-};
-
static struct clk_fixed_factor g12a_fclk_div4_div = {
.mult = 1,
.div = 4,
@@ -1900,6 +1900,66 @@ static struct clk_regmap g12a_sd_emmc_c_clk0 = {
},
};
+/* Video Clocks */
+
+static struct clk_regmap g12a_vid_pll_div = {
+ .data = &(struct meson_vid_pll_div_data){
+ .val = {
+ .reg_off = HHI_VID_PLL_CLK_DIV,
+ .shift = 0,
+ .width = 15,
+ },
+ .sel = {
+ .reg_off = HHI_VID_PLL_CLK_DIV,
+ .shift = 16,
+ .width = 2,
+ },
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vid_pll_div",
+ .ops = &meson_vid_pll_div_ro_ops,
+ .parent_names = (const char *[]){ "hdmi_pll" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
+ },
+};
+
+static const char * const g12a_vid_pll_parent_names[] = { "vid_pll_div",
+ "hdmi_pll" };
+
+static struct clk_regmap g12a_vid_pll_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_VID_PLL_CLK_DIV,
+ .mask = 0x1,
+ .shift = 18,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "vid_pll_sel",
+ .ops = &clk_regmap_mux_ops,
+ /*
+ * bit 18 selects from 2 possible parents:
+ * vid_pll_div or hdmi_pll
+ */
+ .parent_names = g12a_vid_pll_parent_names,
+ .num_parents = ARRAY_SIZE(g12a_vid_pll_parent_names),
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
+ },
+};
+
+static struct clk_regmap g12a_vid_pll = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_VID_PLL_CLK_DIV,
+ .bit_idx = 19,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "vid_pll",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "vid_pll_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ },
+};
+
/* VPU Clock */
static const char * const g12a_vpu_parent_names[] = {
@@ -2287,66 +2347,6 @@ static struct clk_regmap g12a_vapb = {
},
};
-/* Video Clocks */
-
-static struct clk_regmap g12a_vid_pll_div = {
- .data = &(struct meson_vid_pll_div_data){
- .val = {
- .reg_off = HHI_VID_PLL_CLK_DIV,
- .shift = 0,
- .width = 15,
- },
- .sel = {
- .reg_off = HHI_VID_PLL_CLK_DIV,
- .shift = 16,
- .width = 2,
- },
- },
- .hw.init = &(struct clk_init_data) {
- .name = "vid_pll_div",
- .ops = &meson_vid_pll_div_ro_ops,
- .parent_names = (const char *[]){ "hdmi_pll" },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE,
- },
-};
-
-static const char * const g12a_vid_pll_parent_names[] = { "vid_pll_div",
- "hdmi_pll" };
-
-static struct clk_regmap g12a_vid_pll_sel = {
- .data = &(struct clk_regmap_mux_data){
- .offset = HHI_VID_PLL_CLK_DIV,
- .mask = 0x1,
- .shift = 18,
- },
- .hw.init = &(struct clk_init_data){
- .name = "vid_pll_sel",
- .ops = &clk_regmap_mux_ops,
- /*
- * bit 18 selects from 2 possible parents:
- * vid_pll_div or hdmi_pll
- */
- .parent_names = g12a_vid_pll_parent_names,
- .num_parents = ARRAY_SIZE(g12a_vid_pll_parent_names),
- .flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
- },
-};
-
-static struct clk_regmap g12a_vid_pll = {
- .data = &(struct clk_regmap_gate_data){
- .offset = HHI_VID_PLL_CLK_DIV,
- .bit_idx = 19,
- },
- .hw.init = &(struct clk_init_data) {
- .name = "vid_pll",
- .ops = &clk_regmap_gate_ops,
- .parent_names = (const char *[]){ "vid_pll_sel" },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
- },
-};
-
static const char * const g12a_vclk_parent_names[] = {
"vid_pll", "gp0_pll", "hifi_pll", "mpll1", "fclk_div3", "fclk_div4",
"fclk_div5", "fclk_div7"
--
2.17.1
Powered by blists - more mailing lists