lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f6582e43-168e-1b7e-9db8-3d263bc3ba0d@gmail.com>
Date:   Mon, 22 Jul 2019 12:54:51 +0300
From:   Dmitry Osipenko <digetx@...il.com>
To:     Sowjanya Komatineni <skomatineni@...dia.com>,
        thierry.reding@...il.com, jonathanh@...dia.com, tglx@...utronix.de,
        jason@...edaemon.net, marc.zyngier@....com,
        linus.walleij@...aro.org, stefan@...er.ch, mark.rutland@....com
Cc:     pdeschrijver@...dia.com, pgaikwad@...dia.com, sboyd@...nel.org,
        linux-clk@...r.kernel.org, linux-gpio@...r.kernel.org,
        jckuo@...dia.com, josephl@...dia.com, talho@...dia.com,
        linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org,
        mperttunen@...dia.com, spatra@...dia.com, robh+dt@...nel.org,
        devicetree@...r.kernel.org
Subject: Re: [PATCH V6 01/21] irqchip: tegra: Do not disable COP IRQ during
 suspend

21.07.2019 22:40, Sowjanya Komatineni пишет:
> Tegra210 platforms use sc7 entry firmware to program Tegra LP0/SC7 entry
> sequence and sc7 entry firmware is run from COP/BPMP-Lite.
> 
> So, COP/BPMP-Lite still need IRQ function to finish SC7 suspend sequence
> for Tegra210.
> 
> This patch has fix for leaving the COP IRQ enabled for Tegra210 during
> interrupt controller suspend operation.
> 
> Acked-by: Thierry Reding <treding@...dia.com>
> Signed-off-by: Sowjanya Komatineni <skomatineni@...dia.com>
> ---
>  drivers/irqchip/irq-tegra.c | 20 ++++++++++++++++++--
>  1 file changed, 18 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-tegra.c b/drivers/irqchip/irq-tegra.c
> index e1f771c72fc4..851f88cef508 100644
> --- a/drivers/irqchip/irq-tegra.c
> +++ b/drivers/irqchip/irq-tegra.c
> @@ -44,6 +44,7 @@ static unsigned int num_ictlrs;
>  
>  struct tegra_ictlr_soc {
>  	unsigned int num_ictlrs;
> +	bool supports_sc7;
>  };
>  
>  static const struct tegra_ictlr_soc tegra20_ictlr_soc = {
> @@ -56,6 +57,7 @@ static const struct tegra_ictlr_soc tegra30_ictlr_soc = {
>  
>  static const struct tegra_ictlr_soc tegra210_ictlr_soc = {
>  	.num_ictlrs = 6,
> +	.supports_sc7 = true,
>  };
>  
>  static const struct of_device_id ictlr_matches[] = {
> @@ -67,6 +69,7 @@ static const struct of_device_id ictlr_matches[] = {
>  
>  struct tegra_ictlr_info {
>  	void __iomem *base[TEGRA_MAX_NUM_ICTLRS];
> +	const struct tegra_ictlr_soc *soc;
>  #ifdef CONFIG_PM_SLEEP
>  	u32 cop_ier[TEGRA_MAX_NUM_ICTLRS];
>  	u32 cop_iep[TEGRA_MAX_NUM_ICTLRS];
> @@ -147,8 +150,20 @@ static int tegra_ictlr_suspend(void)
>  		lic->cop_ier[i] = readl_relaxed(ictlr + ICTLR_COP_IER);
>  		lic->cop_iep[i] = readl_relaxed(ictlr + ICTLR_COP_IEP_CLASS);
>  
> -		/* Disable COP interrupts */
> -		writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR);
> +		/*
> +		 * AVP/COP/BPMP-Lite is the Tegra boot processor.
> +		 *
> +		 * Tegra210 system suspend flow uses sc7entry firmware which
> +		 * is executed by COP/BPMP and it includes disabling COP IRQ,
> +		 * clamping CPU rail, turning off VDD_CPU, and preparing the
> +		 * system to go to SC7/LP0.
> +		 *
> +		 * COP/BPMP wakes up when COP IRQ is triggered and runs
> +		 * sc7entry-firmware. So need to keep COP interrupt enabled.
> +		 */
> +		if (!lic->soc->supports_sc7)
> +			/* Disable COP interrupts if SC7 is not supported */

All Tegra SoCs support SC7, hence the 'supports_sc7' and the comment
doesn't sound correct to me. Something like 'firmware_sc7' should suit
better here.

> +			writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR);

Secondly, I'm also not sure why COP interrupts need to be disabled for
pre-T210 at all, since COP is unused. This looks to me like it was
cut-n-pasted from downstream kernel without a good reason and could be
simply removed.

>  		/* Disable CPU interrupts */
>  		writel_relaxed(~0ul, ictlr + ICTLR_CPU_IER_CLR);
> @@ -339,6 +354,7 @@ static int __init tegra_ictlr_init(struct device_node *node,
>  		goto out_unmap;
>  	}
>  
> +	lic->soc = soc;
>  	tegra_ictlr_syscore_init();
>  
>  	pr_info("%pOF: %d interrupts forwarded to %pOF\n",
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ