linux-kernel - [PATCH v2 0/5] Add DSP node for i.MX8QXP board to be used by DSP SOF driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190723084104.12639-1-daniel.baluta@nxp.com>
Date:   Tue, 23 Jul 2019 11:40:59 +0300
From:   Daniel Baluta <daniel.baluta@....com>
To:     m.felsch@...gutronix.de, shawnguo@...nel.org
Cc:     mark.rutland@....com, aisheng.dong@....com, peng.fan@....com,
        anson.huang@....com, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-imx@....com,
        shengjiu.wang@....com, paul.olaru@....com, robh+dt@...nel.org,
        kernel@...gutronix.de, leonard.crestez@....com, festevam@...il.com,
        linux-arm-kernel@...ts.infradead.org,
        sound-open-firmware@...a-project.org,
        Daniel Baluta <daniel.baluta@....com>
Subject: [PATCH v2 0/5] Add DSP node for i.MX8QXP board to be used by DSP SOF driver

i.MX8QXP boards feature an Hifi4 DSP from Tensilica.

This patch series aims on adding the DT node describing the DSP,
but it also contains the Linux SOF DSP driver that will use the DT node
for easier review.

Note that we switched to the new yaml format for bindings documentation.

The DSP will run SOF Firmware [1]. Patches 1,2,3 are adding support
for Linux DSP driver are already sent for review to SOF folks [2]

[1] https://github.com/thesofproject/sof
[2] https://github.com/thesofproject/linux/pull/1048/commits

Changes since v1:
	- removed 'clk: imx8: Add DSP related clocks' as it was already
	  applied by Shawn
	- add patches adding support for Linux DSP driver to make things
	  clear for review
	- add maxItems property for PM in DT bindings doc

Daniel Baluta (5):
  ASoC: SOF: imx: Add i.MX8 HW support
  ASoC: SOF: topology: Add dummy support for i.MX8 DAIs
  ASoC: SOF: Add DT DSP device support
  arm64: dts: imx8qxp: Add DSP DT node
  dt-bindings: dsp: fsl: Add DSP core binding support

 .../devicetree/bindings/dsp/fsl,dsp.yaml      |  87 ++++
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts |   4 +
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi    |  32 ++
 include/sound/sof/dai.h                       |   2 +
 include/uapi/sound/sof/tokens.h               |   8 +
 sound/soc/sof/Kconfig                         |  10 +
 sound/soc/sof/Makefile                        |   4 +
 sound/soc/sof/imx/Kconfig                     |  21 +
 sound/soc/sof/imx/Makefile                    |   7 +
 sound/soc/sof/imx/imx8.c                      | 464 ++++++++++++++++++
 sound/soc/sof/sof-dt-dev.c                    | 159 ++++++
 sound/soc/sof/topology.c                      |  30 ++
 12 files changed, 828 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
 create mode 100644 sound/soc/sof/imx/Kconfig
 create mode 100644 sound/soc/sof/imx/Makefile
 create mode 100644 sound/soc/sof/imx/imx8.c
 create mode 100644 sound/soc/sof/sof-dt-dev.c

-- 
2.17.1