linux-kernel - Re: [PATCH v7 2/4] drm/panel: set display info in panel attach

Open Source and information security mailing list archives

Message-ID: <20190723091945.GD787@ravnborg.org>
Date:   Tue, 23 Jul 2019 11:19:45 +0200
From:   Sam Ravnborg <sam@...nborg.org>
To:     Derek Basehore <dbasehore@...omium.org>,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc:     linux-kernel@...r.kernel.org,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        intel-gfx@...ts.freedesktop.org, David Airlie <airlied@...ux.ie>,
        Thierry Reding <thierry.reding@...il.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        dri-devel@...ts.freedesktop.org,
        Rodrigo Vivi <rodrigo.vivi@...el.com>,
        linux-mediatek@...ts.infradead.org, Sean Paul <sean@...rly.run>,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v7 2/4] drm/panel: set display info in panel attach

Hi Derek.

On Tue, Jul 09, 2019 at 07:16:57PM -0700, Derek Basehore wrote:
> Devicetree systems can set panel orientation via a panel binding, but
> there's no way, as is, to propagate this setting to the connector,
> where the property need to be added.
> To address this, this patch sets orientation, as well as other fixed
> values for the panel, in the drm_panel_attach function. These values
> are stored from probe in the drm_panel struct.

This approch seems to conflict with work done by Laurent where the
ownership/creation of the connector will be moved to the display controller.

If I understand it correct then there should not be a 1:1 relation
between a panel and a connector anymore.

We should not try to work in two different directions with this.
Laurent, can you comment on this?

If we move forard with this patch, then all fields in drm_panel needs
kernel-doc - preferably inline.

	Sam

> 
> Signed-off-by: Derek Basehore <dbasehore@...omium.org>
> ---
>  drivers/gpu/drm/drm_panel.c | 28 ++++++++++++++++++++++++++++
>  include/drm/drm_panel.h     | 14 ++++++++++++++
>  2 files changed, 42 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
> index 169bab54d52d..ca01095470a9 100644
> --- a/drivers/gpu/drm/drm_panel.c
> +++ b/drivers/gpu/drm/drm_panel.c
> @@ -104,11 +104,23 @@ EXPORT_SYMBOL(drm_panel_remove);
>   */
>  int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector)
>  {
> +	struct drm_display_info *info;
> +
>  	if (panel->connector)
>  		return -EBUSY;
>  
>  	panel->connector = connector;
>  	panel->drm = connector->dev;
> +	info = &connector->display_info;
> +	info->width_mm = panel->width_mm;
> +	info->height_mm = panel->height_mm;
> +	info->bpc = panel->bpc;
> +	info->panel_orientation = panel->orientation;
> +	info->bus_flags = panel->bus_flags;
> +	if (panel->bus_formats)
> +		drm_display_info_set_bus_formats(&connector->display_info,
> +						 panel->bus_formats,
> +						 panel->num_bus_formats);
>  
>  	return 0;
>  }
> @@ -128,6 +140,22 @@ EXPORT_SYMBOL(drm_panel_attach);
>   */
>  int drm_panel_detach(struct drm_panel *panel)
>  {
> +	struct drm_display_info *info;
> +
> +	if (!panel->connector)
> +		goto out;
> +
> +	info = &panel->connector->display_info;
> +	info->width_mm = 0;
> +	info->height_mm = 0;
> +	info->bpc = 0;
> +	info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> +	info->bus_flags = 0;
> +	kfree(info->bus_formats);
> +	info->bus_formats = NULL;
> +	info->num_bus_formats = 0;
> +
> +out:
>  	panel->connector = NULL;
>  	panel->drm = NULL;
>  
> diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
> index fc7da55f41d9..a6a881b987dd 100644
> --- a/include/drm/drm_panel.h
> +++ b/include/drm/drm_panel.h
> @@ -39,6 +39,8 @@ enum drm_panel_orientation;
>   * struct drm_panel_funcs - perform operations on a given panel
>   * @disable: disable panel (turn off back light, etc.)
>   * @unprepare: turn off panel
> + * @detach: detach panel->connector (clear internal state, etc.)
> + * @attach: attach panel->connector (update internal state, etc.)
>   * @prepare: turn on panel and perform set up
>   * @enable: enable panel (turn on back light, etc.)
>   * @get_modes: add modes to the connector that the panel is attached to and
> @@ -95,6 +97,18 @@ struct drm_panel {
>  
>  	const struct drm_panel_funcs *funcs;
>  
> +	/*
> +	 * panel information to be set in the connector when the panel is
> +	 * attached.
> +	 */
> +	unsigned int width_mm;
> +	unsigned int height_mm;
> +	unsigned int bpc;
> +	int orientation;
> +	const u32 *bus_formats;
> +	unsigned int num_bus_formats;
> +	u32 bus_flags;
> +
>  	struct list_head list;
>  };
>  
> -- 
> 2.22.0.410.gd8fdbe21b5-goog
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@...ts.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives