Message-ID: <CAAeHK+zMdTKg3kJgbJjsVKp_HFR5SeXLxUs1kV0bbXE-DDFizw@mail.gmail.com>
Date:   Tue, 23 Jul 2019 18:19:04 +0200
From:   Andrey Konovalov <andreyknvl@...gle.com>
To:     syzbot <syzbot+4efacf59126f1ae87000@...kaller.appspotmail.com>,
        Andrey Konovalov <andreyknvl@...gle.com>,
        LKML <linux-kernel@...r.kernel.org>,
        USB list <linux-usb@...r.kernel.org>,
        syzkaller-bugs <syzkaller-bugs@...glegroups.com>
Subject: Re: usb-fuzzer boot error: general protection fault in dma_direct_max_mapping_size

On Tue, Jul 23, 2019 at 6:14 PM Eric Biggers <ebiggers@...nel.org> wrote:
>
> On Tue, Jul 23, 2019 at 07:48:05AM -0700, syzbot wrote:
> > Hello,
> >
> > syzbot found the following crash on:
> >
> > HEAD commit:    1154c0b0 wip
> > git tree:       https://github.com/google/kasan.git usb-fuzzer
> > console output: https://syzkaller.appspot.com/x/log.txt?x=1197774c600000
> > kernel config:  https://syzkaller.appspot.com/x/.config?x=b228fb19779df17d
> > dashboard link: https://syzkaller.appspot.com/bug?extid=4efacf59126f1ae87000
> > compiler:       gcc (GCC) 9.0.0 20181231 (experimental)
> >
> > Unfortunately, I don't have any reproducer for this crash yet.
> >
> > IMPORTANT: if you fix the bug, please add the following tag to the commit:
> > Reported-by: syzbot+4efacf59126f1ae87000@...kaller.appspotmail.com
> >
> > RPC: Registered udp transport module.
> > RPC: Registered tcp transport module.
> > RPC: Registered tcp NFSv4.1 backchannel transport module.
> > pci 0000:00:00.0: Limiting direct PCI/PCI transfers
> > PCI: CLS 0 bytes, default 64
> > PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> > software IO TLB: mapped [mem 0xbbffd000-0xbfffd000] (64MB)
> > RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl
> > timer
> > clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x212735223b2,
> > max_idle_ns: 440795277976 ns
> > clocksource: Switched to clocksource tsc
> > check: Scanning for low memory corruption every 60 seconds
> > Initialise system trusted keyrings
> > workingset: timestamp_bits=40 max_order=21 bucket_order=0
> > NFS: Registering the id_resolver key type
> > Key type id_resolver registered
> > Key type id_legacy registered
> > 9p: Installing v9fs 9p2000 file system support
> > Key type asymmetric registered
> > Asymmetric key parser 'x509' registered
> > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
> > io scheduler mq-deadline registered
> > io scheduler kyber registered
> > usbcore: registered new interface driver udlfb
> > usbcore: registered new interface driver smscufx
> > input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> > ACPI: Power Button [PWRF]
> > input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
> > ACPI: Sleep Button [SLPF]
> > PCI Interrupt Link [LNKC] enabled at IRQ 11
> > virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver
> > PCI Interrupt Link [LNKD] enabled at IRQ 10
> > virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
> > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> > 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> > 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
> > 00:05: ttyS2 at I/O 0x3e8 (irq = 6, base_baud = 115200) is a 16550A
> > 00:06: ttyS3 at I/O 0x2e8 (irq = 7, base_baud = 115200) is a 16550A
> > Non-volatile memory driver v1.3
> > Linux agpgart interface v0.103
> > usbcore: registered new interface driver udl
> > loop: module loaded
> > usbcore: registered new interface driver rtsx_usb
> > usbcore: registered new interface driver viperboard
> > usbcore: registered new interface driver dln2
> > usbcore: registered new interface driver pn533_usb
> > usbcore: registered new interface driver port100
> > usbcore: registered new interface driver nfcmrvl
> > scsi host0: Virtio SCSI HBA
> > kasan: CONFIG_KASAN_INLINE enabled
> > kasan: GPF could be caused by NULL-ptr deref or user memory access
> > general protection fault: 0000 [#1] SMP KASAN
> > CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc1+ #16
> > Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
> > Google 01/01/2011
> > RIP: 0010:dma_addressing_limited /./include/linux/dma-mapping.h:692 [inline]
> > RIP: 0010:dma_direct_max_mapping_size+0x73/0x19a /kernel/dma/direct.c:408
> > Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 1e 01 00 00 48 8b 9d 38 03
> > 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <80> 3c 02 00 0f 85
> > 06 01 00 00 48 8d bd 48 03 00 00 48 8b 1b 48 b8
> > RSP: 0000:ffff8881da18f628 EFLAGS: 00010246
> > RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff812d716c
> > RDX: 0000000000000000 RSI: ffffffff812d7189 RDI: ffff8881d7428378
> > RBP: ffff8881d7428040 R08: ffff8881da180000 R09: ffffed103ade30cb
> > R10: ffffed103ade30ca R11: ffff8881d6f18657 R12: ffff8881d7428040
> > R13: ffff8881d769e8b0 R14: 0000000000000200 R15: 0000000000000000
> > FS:  0000000000000000(0000) GS:ffff8881db300000(0000) knlGS:0000000000000000
> > CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > CR2: 0000000000000000 CR3: 0000000006a21000 CR4: 00000000001406e0
> > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> > Call Trace:
> >  dma_max_mapping_size+0xb5/0xf0 /kernel/dma/mapping.c:375
> >  __scsi_init_queue+0x17e/0x510 /drivers/scsi/scsi_lib.c:1787
> >  scsi_mq_alloc_queue+0xcb/0x170 /drivers/scsi/scsi_lib.c:1833
> >  scsi_alloc_sdev+0x82e/0xc50 /drivers/scsi/scsi_scan.c:269
> >  scsi_probe_and_add_lun+0x1ee5/0x2cd0 /drivers/scsi/scsi_scan.c:1078
> >  __scsi_scan_target+0x273/0xc30 /drivers/scsi/scsi_scan.c:1562
> >  scsi_scan_channel.part.0+0x126/0x1a0 /drivers/scsi/scsi_scan.c:1650
> >  scsi_scan_channel /drivers/scsi/scsi_scan.c:1677 [inline]
> >  scsi_scan_host_selected+0x2bb/0x3f0 /drivers/scsi/scsi_scan.c:1679
> >  do_scsi_scan_host /drivers/scsi/scsi_scan.c:1817 [inline]
> >  do_scsi_scan_host+0x1e8/0x260 /drivers/scsi/scsi_scan.c:1807
> >  scsi_scan_host /drivers/scsi/scsi_scan.c:1847 [inline]
> >  scsi_scan_host+0x37c/0x440 /drivers/scsi/scsi_scan.c:1835
> >  virtscsi_probe+0x9b7/0xbb5 /drivers/scsi/virtio_scsi.c:847
> >  virtio_dev_probe+0x463/0x710 /drivers/virtio/virtio.c:248
> >  really_probe+0x281/0x650 /drivers/base/dd.c:548
> >  driver_probe_device+0x101/0x1b0 /drivers/base/dd.c:709
> >  device_driver_attach+0x108/0x140 /drivers/base/dd.c:983
> >  __driver_attach+0xda/0x240 /drivers/base/dd.c:1060
> >  bus_for_each_dev+0x14b/0x1d0 /drivers/base/bus.c:304
> >  bus_add_driver+0x44e/0x5a0 /drivers/base/bus.c:645
> >  driver_register+0x1c4/0x320 /drivers/base/driver.c:170
> >  __write_once_size /./include/linux/compiler.h:226 [inline]
> >  INIT_LIST_HEAD /./include/linux/list.h:28 [inline]
> >  init+0xa1/0x115 /drivers/char/virtio_console.c:2251
> >  do_one_initcall+0xf0/0x614 /init/main.c:939
> >  do_initcall_level /init/main.c:1007 [inline]
> >  do_initcalls /init/main.c:1015 [inline]
> >  do_basic_setup /init/main.c:1032 [inline]
> >  kernel_init_freeable+0x4a9/0x596 /init/main.c:1192
> >  kernel_init+0xd/0x1bf /init/main.c:1110
> >  ret_from_fork+0x24/0x30 /arch/x86/entry/entry_64.S:352
> > Modules linked in:
> > ---[ end trace 73ab592d53bc046f ]---
> > RIP: 0010:dma_addressing_limited /./include/linux/dma-mapping.h:692 [inline]
> > RIP: 0010:dma_direct_max_mapping_size+0x73/0x19a /kernel/dma/direct.c:408
> > Code: df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 1e 01 00 00 48 8b 9d 38 03
> > 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <80> 3c 02 00 0f 85
> > 06 01 00 00 48 8d bd 48 03 00 00 48 8b 1b 48 b8
> > RSP: 0000:ffff8881da18f628 EFLAGS: 00010246
> > RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff812d716c
> > RDX: 0000000000000000 RSI: ffffffff812d7189 RDI: ffff8881d7428378
> > RBP: ffff8881d7428040 R08: ffff8881da180000 R09: ffffed103ade30cb
> > R10: ffffed103ade30ca R11: ffff8881d6f18657 R12: ffff8881d7428040
> > R13: ffff8881d769e8b0 R14: 0000000000000200 R15: 0000000000000000
> > FS:  0000000000000000(0000) GS:ffff8881db300000(0000) knlGS:0000000000000000
> > CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > CR2: 0000000000000000 CR3: 0000000006a21000 CR4: 00000000001406e0
> > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> >
> >
> > ---
> > This bug is generated by a bot. It may contain errors.
> > See https://goo.gl/tpsmEJ for more information about syzbot.
> > syzbot engineers can be reached at syzkaller@...glegroups.com.
> >
> > syzbot will keep track of this bug report. See:
> > https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
> >
> > --
> > You received this message because you are subscribed to the Google Groups "syzkaller-bugs" group.
> > To unsubscribe from this group and stop receiving emails from it, send an email to syzkaller-bugs+unsubscribe@...glegroups.com.
> > To view this discussion on the web visit https://groups.google.com/d/msgid/syzkaller-bugs/000000000000c3c7b6058e5a47af%40google.com.
>
> Seems there is a fix for this queued in the SCSI tree.
>
> #syz fix: scsi: core: fix the dma_max_mapping_size call

Great, thanks! Because of this bug USB fuzzing is currently broken.

>
> Other threads:
>
> https://marc.info/?l=linux-scsi&m=156378725427719&w=2
> https://lkml.kernel.org/lkml/20190722163759.GA28686@codemonkey.org.uk/
> https://lkml.kernel.org/lkml/CACVXFVMWM3xg6EEyoyNjkLPv=8+wQKiHj6erMS_gGX25f-Ot4g@mail.gmail.com/
>
> - Eric

Powered by blists - more mailing lists