| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190724191745.137353578@linuxfoundation.org>
Date: Wed, 24 Jul 2019 21:20:29 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Will Deacon <will.deacon@....com>,
Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Mark Rutland <mark.rutland@....com>,
Marc Zyngier <marc.zyngier@....com>,
Julien Thierry <julien.thierry@....com>,
Catalin Marinas <catalin.marinas@....com>
Subject: [PATCH 5.1 277/371] arm64: Fix interrupt tracing in the presence of NMIs
From: Julien Thierry <julien.thierry@....com>
commit 17ce302f3117e9518395847a3120c8a108b587b8 upstream.
In the presence of any form of instrumentation, nmi_enter() should be
done before calling any traceable code and any instrumentation code.
Currently, nmi_enter() is done in handle_domain_nmi(), which is much
too late as instrumentation code might get called before. Move the
nmi_enter/exit() calls to the arch IRQ vector handler.
On arm64, it is not possible to know if the IRQ vector handler was
called because of an NMI before acknowledging the interrupt. However, It
is possible to know whether normal interrupts could be taken in the
interrupted context (i.e. if taking an NMI in that context could
introduce a potential race condition).
When interrupting a context with IRQs disabled, call nmi_enter() as soon
as possible. In contexts with IRQs enabled, defer this to the interrupt
controller, which is in a better position to know if an interrupt taken
is an NMI.
Fixes: bc3c03ccb464 ("arm64: Enable the support of pseudo-NMIs")
Cc: <stable@...r.kernel.org> # 5.1.x-
Cc: Will Deacon <will.deacon@....com>
Cc: Thomas Gleixner <tglx@...utronix.de>
Cc: Jason Cooper <jason@...edaemon.net>
Cc: Mark Rutland <mark.rutland@....com>
Reviewed-by: Marc Zyngier <marc.zyngier@....com>
Signed-off-by: Julien Thierry <julien.thierry@....com>
Signed-off-by: Catalin Marinas <catalin.marinas@....com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
arch/arm64/kernel/entry.S | 44 ++++++++++++++++++++++++++++++++-----------
arch/arm64/kernel/irq.c | 17 ++++++++++++++++
drivers/irqchip/irq-gic-v3.c | 7 ++++++
kernel/irq/irqdesc.c | 8 +++++--
4 files changed, 63 insertions(+), 13 deletions(-)
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -420,6 +420,20 @@ tsk .req x28 // current thread_info
irq_stack_exit
.endm
+#ifdef CONFIG_ARM64_PSEUDO_NMI
+ /*
+ * Set res to 0 if irqs were unmasked in interrupted context.
+ * Otherwise set res to non-0 value.
+ */
+ .macro test_irqs_unmasked res:req, pmr:req
+alternative_if ARM64_HAS_IRQ_PRIO_MASKING
+ sub \res, \pmr, #GIC_PRIO_IRQON
+alternative_else
+ mov \res, xzr
+alternative_endif
+ .endm
+#endif
+
.text
/*
@@ -616,19 +630,19 @@ ENDPROC(el1_sync)
el1_irq:
kernel_entry 1
enable_da_f
-#ifdef CONFIG_TRACE_IRQFLAGS
+
#ifdef CONFIG_ARM64_PSEUDO_NMI
alternative_if ARM64_HAS_IRQ_PRIO_MASKING
ldr x20, [sp, #S_PMR_SAVE]
-alternative_else
- mov x20, #GIC_PRIO_IRQON
-alternative_endif
- cmp x20, #GIC_PRIO_IRQOFF
- /* Irqs were disabled, don't trace */
- b.ls 1f
+alternative_else_nop_endif
+ test_irqs_unmasked res=x0, pmr=x20
+ cbz x0, 1f
+ bl asm_nmi_enter
+1:
#endif
+
+#ifdef CONFIG_TRACE_IRQFLAGS
bl trace_hardirqs_off
-1:
#endif
irq_handler
@@ -647,14 +661,22 @@ alternative_else_nop_endif
bl preempt_schedule_irq // irq en/disable is done inside
1:
#endif
-#ifdef CONFIG_TRACE_IRQFLAGS
+
#ifdef CONFIG_ARM64_PSEUDO_NMI
/*
* if IRQs were disabled when we received the interrupt, we have an NMI
* and we are not re-enabling interrupt upon eret. Skip tracing.
*/
- cmp x20, #GIC_PRIO_IRQOFF
- b.ls 1f
+ test_irqs_unmasked res=x0, pmr=x20
+ cbz x0, 1f
+ bl asm_nmi_exit
+1:
+#endif
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+#ifdef CONFIG_ARM64_PSEUDO_NMI
+ test_irqs_unmasked res=x0, pmr=x20
+ cbnz x0, 1f
#endif
bl trace_hardirqs_on
1:
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -27,8 +27,10 @@
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/irqchip.h>
+#include <linux/kprobes.h>
#include <linux/seq_file.h>
#include <linux/vmalloc.h>
+#include <asm/daifflags.h>
#include <asm/vmap_stack.h>
unsigned long irq_err_count;
@@ -76,3 +78,18 @@ void __init init_IRQ(void)
if (!handle_arch_irq)
panic("No interrupt controller found.");
}
+
+/*
+ * Stubs to make nmi_enter/exit() code callable from ASM
+ */
+asmlinkage void notrace asm_nmi_enter(void)
+{
+ nmi_enter();
+}
+NOKPROBE_SYMBOL(asm_nmi_enter);
+
+asmlinkage void notrace asm_nmi_exit(void)
+{
+ nmi_exit();
+}
+NOKPROBE_SYMBOL(asm_nmi_exit);
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -472,8 +472,12 @@ static void gic_deactivate_unhandled(u32
static inline void gic_handle_nmi(u32 irqnr, struct pt_regs *regs)
{
+ bool irqs_enabled = interrupts_enabled(regs);
int err;
+ if (irqs_enabled)
+ nmi_enter();
+
if (static_branch_likely(&supports_deactivate_key))
gic_write_eoir(irqnr);
/*
@@ -485,6 +489,9 @@ static inline void gic_handle_nmi(u32 ir
err = handle_domain_nmi(gic_data.domain, irqnr, regs);
if (err)
gic_deactivate_unhandled(irqnr);
+
+ if (irqs_enabled)
+ nmi_exit();
}
static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -679,6 +679,8 @@ int __handle_domain_irq(struct irq_domai
* @hwirq: The HW irq number to convert to a logical one
* @regs: Register file coming from the low-level handling code
*
+ * This function must be called from an NMI context.
+ *
* Returns: 0 on success, or -EINVAL if conversion has failed
*/
int handle_domain_nmi(struct irq_domain *domain, unsigned int hwirq,
@@ -688,7 +690,10 @@ int handle_domain_nmi(struct irq_domain
unsigned int irq;
int ret = 0;
- nmi_enter();
+ /*
+ * NMI context needs to be setup earlier in order to deal with tracing.
+ */
+ WARN_ON(!in_nmi());
irq = irq_find_mapping(domain, hwirq);
@@ -701,7 +706,6 @@ int handle_domain_nmi(struct irq_domain
else
ret = -EINVAL;
- nmi_exit();
set_irq_regs(old_regs);
return ret;
}
Powered by blists - more mailing lists