| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1563958245-6321-1-git-send-email-chunfeng.yun@mediatek.com>
Date: Wed, 24 Jul 2019 16:50:34 +0800
From: Chunfeng Yun <chunfeng.yun@...iatek.com>
To: Rob Herring <robh+dt@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Biju Das <biju.das@...renesas.com>
CC: Mark Rutland <mark.rutland@....com>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Adam Thomson <Adam.Thomson.Opensource@...semi.com>,
Li Jun <jun.li@....com>,
Badhri Jagan Sridharan <badhri@...gle.com>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Hans de Goede <hdegoede@...hat.com>,
Andy Shevchenko <andy.shevchenko@...il.com>,
Min Guo <min.guo@...iatek.com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-usb@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
Linus Walleij <linus.walleij@...aro.org>
Subject: [PATCH v8 00/11] add USB GPIO based connection detection driver
Because the USB Connector is introduced and the requirement of
usb-connector.txt binding, the old way using extcon to support
USB Dual-Role switch is now deprecated, meanwhile there is no
available common driver when use Type-B connector, typically
using an input GPIO to detect USB ID pin.
This patch series introduce a USB GPIO based connection detecton
driver and try to replace the function provided by extcon-usb-gpio
driver.
v8 changes:
1. rename the driver's name suggested by Heikki
2. move the driver from usb/roles/ into usb/common/ suggested by Heikki
3. introduce Kconfig for usb common core to add the new driver
4. modify binding of the driver
5. rename the subject title
v7 changes:
1. [5/10]: add signed-off-by Chunfeng
2. [6/10]: add signed-off-by Chunfeng
3. [6/10]: depends on linux-next of Rafael's tree [1]
4. [7/10]: add signed-off-by Chunfeng and tested-by Biju
5. [9/10]: add tested-by Nagarjuna, and remove DEV_PMS_OPS suggested by Andy
[1] https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git/log/?h=linux-next
v6 changes:
1. merge [1] and [2] into this series
2. don't use graph anymore to find usb-role-switch
3. abandon [3] and introduce three patches (6, 7, 8 in this series)
to rebuild APIs getting usb-role-switch
[1]: [v3] dt-binding: usb: add usb-role-switch property
https://patchwork.kernel.org/patch/10934835/
[2]: [v6,08/13] usb: roles: Introduce stubs for the exiting functions in role.h
https://patchwork.kernel.org/patch/10909971/
[3]: [PATCH v5 4/6] usb: roles: add API to get usb_role_switch by node
v5 changes:
1. remove linux/of.h and put usb_role_switch when error happens,
suggested by Biju
2. treat Type-B connector as USB controller's child, but not as
a virtual device, suggested by Rob
3. provide and use generic property "usb-role-switch", see [1],
suggested by Rob
Note: this series still depends on [2]
[1]: [v3] dt-binding: usb: add usb-role-switch property
https://patchwork.kernel.org/patch/10934835/
[2]: [v6,08/13] usb: roles: Introduce stubs for the exiting functions in role.h
https://patchwork.kernel.org/patch/10909971/
v4 changes:
1. use switch_fwnode_match() to find fwnode suggested by Heikki
2. assign fwnode member of usb_role_switch struct suggested by Heikki
3. make [4/6] depend on [2]
3. remove linux/gpio.h suggested by Linus
4. put node when error happens
[4/6] usb: roles: add API to get usb_role_switch by node
[2] [v6,08/13] usb: roles: Introduce stubs for the exiting functions in role.h
https://patchwork.kernel.org/patch/10909971/
v3 changes:
1. add GPIO direction, and use fixed-regulator for GPIO controlled
VBUS regulator suggested by Rob;
2. rebuild fwnode_usb_role_switch_get() suggested by Andy and Heikki
3. treat the type-B connector as a virtual device;
4. change file name of driver again
5. select USB_ROLE_SWITCH in mtu3/Kconfig suggested by Heikki
6. rename ssusb_mode_manual_switch() to ssusb_mode_switch()
v2 changes:
1. make binding clear, and add a extra compatible suggested by Hans
Chunfeng Yun (8):
dt-binding: usb: add usb-role-switch property
dt-bindings: connector: add optional properties for Type-B
dt-bindings: usb: add binding for USB GPIO based connection detection
driver
dt-bindings: usb: mtu3: add properties about USB Role Switch
usb: roles: get usb-role-switch from parent
usb: common: create Kconfig file
usb: common: add USB GPIO based connection detection driver
usb: mtu3: register a USB Role Switch for dual role mode
Heikki Krogerus (2):
device connection: Add fwnode_connection_find_match()
usb: roles: Add fwnode_usb_role_switch_get() function
Yu Chen (1):
usb: roles: Introduce stubs for the exiting functions in role.h.
.../bindings/connector/usb-connector.txt | 14 +
.../devicetree/bindings/usb/generic.txt | 4 +
.../devicetree/bindings/usb/mediatek,mtu3.txt | 10 +
.../devicetree/bindings/usb/usb-conn-gpio.txt | 31 ++
drivers/base/devcon.c | 43 ++-
drivers/usb/Kconfig | 35 +--
drivers/usb/common/Kconfig | 51 ++++
drivers/usb/common/Makefile | 1 +
drivers/usb/common/usb-conn-gpio.c | 284 ++++++++++++++++++
drivers/usb/mtu3/Kconfig | 1 +
drivers/usb/mtu3/mtu3.h | 5 +
drivers/usb/mtu3/mtu3_debugfs.c | 4 +-
drivers/usb/mtu3/mtu3_dr.c | 48 ++-
drivers/usb/mtu3/mtu3_dr.h | 6 +-
drivers/usb/mtu3/mtu3_plat.c | 3 +-
drivers/usb/roles/class.c | 41 ++-
include/linux/device.h | 10 +-
include/linux/usb/role.h | 37 +++
18 files changed, 570 insertions(+), 58 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/usb-conn-gpio.txt
create mode 100644 drivers/usb/common/Kconfig
create mode 100644 drivers/usb/common/usb-conn-gpio.c
--
2.21.0
Powered by blists - more mailing lists