| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAFqH_50s0J_NEevV9b5o-wq-bw+xGaUZ3WyhVDRZKyM2Yn-iVg@mail.gmail.com>
Date: Thu, 25 Jul 2019 17:45:15 +0200
From: Enric Balletbo Serra <eballetbo@...il.com>
To: Vasily Khoruzhick <anarsoul@...il.com>
Cc: Torsten Duwe <duwe@....de>, Mark Rutland <mark.rutland@....com>,
devicetree <devicetree@...r.kernel.org>,
Maxime Ripard <maxime.ripard@...tlin.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
dri-devel <dri-devel@...ts.freedesktop.org>,
David Airlie <airlied@...ux.ie>, Chen-Yu Tsai <wens@...e.org>,
Rob Herring <robh+dt@...nel.org>,
Thierry Reding <thierry.reding@...il.com>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Harald Geyer <harald@...ib.org>,
Sean Paul <seanpaul@...omium.org>,
Thomas Gleixner <tglx@...utronix.de>,
arm-linux <linux-arm-kernel@...ts.infradead.org>,
Icenowy Zheng <icenowy@...c.io>
Subject: Re: [PATCH v3 5/7] drm/bridge: Add Analogix anx6345 support
Hi,
Missatge de Vasily Khoruzhick <anarsoul@...il.com> del dia dl., 22 de
jul. 2019 a les 20:50:
>
> On Mon, Jul 22, 2019 at 8:11 AM Torsten Duwe <duwe@....de> wrote:
> >
> > From: Icenowy Zheng <icenowy@...c.io>
> >
> > The ANX6345 is an ultra-low power DisplayPower/eDP transmitter designed
> > for portable devices. This driver adds initial support for RGB to eDP
> > mode, without HPD and interrupts.
> >
> > This is a configuration usually seen in eDP applications.
> >
> > Signed-off-by: Icenowy Zheng <icenowy@...c.io>
> > Signed-off-by: Vasily Khoruzhick <anarsoul@...il.com>
> > Signed-off-by: Torsten Duwe <duwe@...e.de>
> > ---
> > drivers/gpu/drm/bridge/analogix/Kconfig | 12 +
> > drivers/gpu/drm/bridge/analogix/Makefile | 1 +
> > drivers/gpu/drm/bridge/analogix/analogix-anx6345.c | 797 +++++++++++++++++++++
> > 3 files changed, 810 insertions(+)
> > create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
> >
> > --- a/drivers/gpu/drm/bridge/analogix/Kconfig
> > +++ b/drivers/gpu/drm/bridge/analogix/Kconfig
> > @@ -1,6 +1,18 @@
> > # SPDX-License-Identifier: GPL-2.0-only
> > +config DRM_ANALOGIX_ANX6345
> > + tristate "Analogix ANX6345 bridge"
> > + select DRM_ANALOGIX_DP
> > + select DRM_KMS_HELPER
> > + select REGMAP_I2C
> > + help
> > + ANX6345 is an ultra-low Full-HD DisplayPort/eDP
> > + transmitter designed for portable devices. The
> > + ANX6345 transforms the LVTTL RGB output of an
> > + application processor to eDP or DisplayPort.
> > +
> > config DRM_ANALOGIX_ANX78XX
> > tristate "Analogix ANX78XX bridge"
> > + select DRM_ANALOGIX_DP
> > select DRM_KMS_HELPER
> > select REGMAP_I2C
> > help
> > --- a/drivers/gpu/drm/bridge/analogix/Makefile
> > +++ b/drivers/gpu/drm/bridge/analogix/Makefile
> > @@ -1,4 +1,5 @@
> > # SPDX-License-Identifier: GPL-2.0-only
> > analogix_dp-objs := analogix_dp_core.o analogix_dp_reg.o analogix-i2c-dptx.o
> > +obj-$(CONFIG_DRM_ANALOGIX_ANX6345) += analogix-anx6345.o
> > obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
> > obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix_dp.o
> > --- /dev/null
> > +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
> > @@ -0,0 +1,793 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright(c) 2016, Analogix Semiconductor.
> > + * Copyright(c) 2017, Icenowy Zheng <icenowy@...c.io>
> > + *
> > + * Based on anx7808 driver obtained from chromeos with copyright:
> > + * Copyright(c) 2013, Google Inc.
> > + */
> > +#include <linux/delay.h>
> > +#include <linux/err.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/i2c.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/regmap.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/types.h>
> > +
> > +#include <drm/drm_atomic_helper.h>
> > +#include <drm/drm_crtc.h>
> > +#include <drm/drm_crtc_helper.h>
> > +#include <drm/drm_dp_helper.h>
> > +#include <drm/drm_edid.h>
> > +#include <drm/drm_of.h>
> > +#include <drm/drm_panel.h>
> > +#include <drm/drm_print.h>
> > +#include <drm/drm_probe_helper.h>
> > +
> > +#include "analogix-i2c-dptx.h"
> > +#include "analogix-i2c-txcommon.h"
> > +
> > +#define POLL_DELAY 50000 /* us */
> > +#define POLL_TIMEOUT 5000000 /* us */
> > +
> > +#define I2C_IDX_DPTX 0
> > +#define I2C_IDX_TXCOM 1
> > +
> > +static const u8 anx6345_i2c_addresses[] = {
> > + [I2C_IDX_DPTX] = ANALOGIX_I2C_DPTX,
> > + [I2C_IDX_TXCOM] = ANALOGIX_I2C_TXCOMMON,
> > +};
> > +#define I2C_NUM_ADDRESSES ARRAY_SIZE(anx6345_i2c_addresses)
> > +
> > +struct anx6345 {
> > + struct drm_dp_aux aux;
> > + struct drm_bridge bridge;
> > + struct i2c_client *client;
> > + struct edid *edid;
> > + struct drm_connector connector;
> > + struct drm_dp_link link;
> > + struct drm_panel *panel;
> > + struct regulator *dvdd12;
> > + struct regulator *dvdd25;
> > + struct gpio_desc *gpiod_reset;
> > + struct mutex lock; /* protect EDID access */
> > +
> > + /* I2C Slave addresses of ANX6345 are mapped as DPTX and SYS */
> > + struct i2c_client *i2c_clients[I2C_NUM_ADDRESSES];
> > + struct regmap *map[I2C_NUM_ADDRESSES];
> > +
> > + u16 chipid;
> > + u8 dpcd[DP_RECEIVER_CAP_SIZE];
> > +
> > + bool powered;
> > +};
> > +
> > +static inline struct anx6345 *connector_to_anx6345(struct drm_connector *c)
> > +{
> > + return container_of(c, struct anx6345, connector);
> > +}
> > +
> > +static inline struct anx6345 *bridge_to_anx6345(struct drm_bridge *bridge)
> > +{
> > + return container_of(bridge, struct anx6345, bridge);
> > +}
> > +
> > +static int anx6345_set_bits(struct regmap *map, u8 reg, u8 mask)
> > +{
> > + return regmap_update_bits(map, reg, mask, mask);
> > +}
> > +
> > +static int anx6345_clear_bits(struct regmap *map, u8 reg, u8 mask)
> > +{
> > + return regmap_update_bits(map, reg, mask, 0);
> > +}
> > +
> > +static ssize_t anx6345_aux_transfer(struct drm_dp_aux *aux,
> > + struct drm_dp_aux_msg *msg)
> > +{
> > + struct anx6345 *anx6345 = container_of(aux, struct anx6345, aux);
> > +
> > + return anx_dp_aux_transfer(anx6345->map[I2C_IDX_DPTX], msg);
> > +}
> > +
> > +static int anx6345_dp_link_training(struct anx6345 *anx6345)
> > +{
> > + unsigned int value;
> > + u8 dp_bw;
> > + int err;
> > +
> > + err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
> > + SP_POWERDOWN_CTRL_REG,
> > + SP_TOTAL_PD);
> > + if (err)
> > + return err;
> > +
> > + err = drm_dp_dpcd_readb(&anx6345->aux, DP_MAX_LINK_RATE, &dp_bw);
> > + if (err < 0)
> > + return err;
> > +
> > + switch (dp_bw) {
> > + case DP_LINK_BW_1_62:
> > + case DP_LINK_BW_2_7:
> > + break;
> > +
> > + default:
> > + DRM_DEBUG_KMS("DP bandwidth (%#02x) not supported\n", dp_bw);
> > + return -EINVAL;
> > + }
> > +
> > + err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG,
> > + SP_VIDEO_MUTE);
> > + if (err)
> > + return err;
> > +
> > + err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
> > + SP_VID_CTRL1_REG, SP_VIDEO_EN);
> > + if (err)
> > + return err;
> > +
> > + /* Get DPCD info */
> > + err = drm_dp_dpcd_read(&anx6345->aux, DP_DPCD_REV,
> > + &anx6345->dpcd, DP_RECEIVER_CAP_SIZE);
> > + if (err < 0) {
> > + DRM_ERROR("Failed to read DPCD: %d\n", err);
> > + return err;
> > + }
> > +
> > + /* Clear channel x SERDES power down */
> > + err = anx6345_clear_bits(anx6345->map[I2C_IDX_DPTX],
> > + SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD);
> > + if (err)
> > + return err;
> > +
> > + /* Check link capabilities */
> > + err = drm_dp_link_probe(&anx6345->aux, &anx6345->link);
> > + if (err < 0) {
> > + DRM_ERROR("Failed to probe link capabilities: %d\n", err);
> > + return err;
> > + }
> > +
> > + /* Power up the sink */
> > + err = drm_dp_link_power_up(&anx6345->aux, &anx6345->link);
> > + if (err < 0) {
> > + DRM_ERROR("Failed to power up DisplayPort link: %d\n", err);
> > + return err;
> > + }
> > +
> > + /* Possibly enable downspread on the sink */
> > + err = regmap_write(anx6345->map[I2C_IDX_DPTX],
> > + SP_DP_DOWNSPREAD_CTRL1_REG, 0);
> > + if (err)
> > + return err;
> > +
> > + if (anx6345->dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5) {
> > + DRM_DEBUG("Enable downspread on the sink\n");
> > + /* 4000PPM */
> > + err = regmap_write(anx6345->map[I2C_IDX_DPTX],
> > + SP_DP_DOWNSPREAD_CTRL1_REG, 8);
> > + if (err)
> > + return err;
> > +
> > + err = drm_dp_dpcd_writeb(&anx6345->aux, DP_DOWNSPREAD_CTRL,
> > + DP_SPREAD_AMP_0_5);
> > + if (err < 0)
> > + return err;
> > + } else {
> > + err = drm_dp_dpcd_writeb(&anx6345->aux, DP_DOWNSPREAD_CTRL, 0);
> > + if (err < 0)
> > + return err;
> > + }
> > +
> > + /* Set the lane count and the link rate on the sink */
> > + if (drm_dp_enhanced_frame_cap(anx6345->dpcd))
> > + err = anx6345_set_bits(anx6345->map[I2C_IDX_DPTX],
> > + SP_DP_SYSTEM_CTRL_BASE + 4,
> > + SP_ENHANCED_MODE);
> > + else
> > + err = anx6345_clear_bits(anx6345->map[I2C_IDX_DPTX],
> > + SP_DP_SYSTEM_CTRL_BASE + 4,
> > + SP_ENHANCED_MODE);
> > + if (err)
> > + return err;
> > +
> > + value = drm_dp_link_rate_to_bw_code(anx6345->link.rate);
> > + err = regmap_write(anx6345->map[I2C_IDX_DPTX],
> > + SP_DP_MAIN_LINK_BW_SET_REG, value);
> > + if (err)
> > + return err;
> > +
> > + err = regmap_write(anx6345->map[I2C_IDX_DPTX],
> > + SP_DP_LANE_COUNT_SET_REG, anx6345->link.num_lanes);
> > + if (err)
> > + return err;
> > +
> > + err = drm_dp_link_configure(&anx6345->aux, &anx6345->link);
> > + if (err < 0) {
> > + DRM_ERROR("Failed to configure DisplayPort link: %d\n", err);
> > + return err;
> > + }
> > +
> > + /* Start training on the source */
> > + err = regmap_write(anx6345->map[I2C_IDX_DPTX], SP_DP_LT_CTRL_REG,
> > + SP_LT_EN);
> > + if (err)
> > + return err;
> > +
> > + return regmap_read_poll_timeout(anx6345->map[I2C_IDX_DPTX],
> > + SP_DP_LT_CTRL_REG,
> > + value, !(value & SP_DP_LT_INPROGRESS),
> > + POLL_DELAY, POLL_TIMEOUT);
> > +}
> > +
> > +static int anx6345_tx_initialization(struct anx6345 *anx6345)
> > +{
> > + int err, i;
> > +
> > + /* FIXME: colordepth is hardcoded for now */
> > + err = regmap_write(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL2_REG,
> > + SP_IN_BPC_6BIT << SP_IN_BPC_SHIFT);
> > + if (err)
> > + return err;
> > +
> > + err = regmap_write(anx6345->map[I2C_IDX_DPTX], SP_DP_PLL_CTRL_REG, 0);
> > + if (err)
> > + return err;
> > +
> > + err = regmap_write(anx6345->map[I2C_IDX_TXCOM],
> > + SP_ANALOG_DEBUG1_REG, 0);
> > + if (err)
> > + return err;
> > +
> > + err = regmap_write(anx6345->map[I2C_IDX_DPTX],
> > + SP_DP_LINK_DEBUG_CTRL_REG,
> > + SP_NEW_PRBS7 | SP_M_VID_DEBUG);
> > + if (err)
> > + return err;
> > +
> > + err = regmap_write(anx6345->map[I2C_IDX_DPTX],
> > + SP_DP_ANALOG_POWER_DOWN_REG, 0);
> > + if (err)
> > + return err;
> > +
> > + /* Force HPD */
> > + err = anx6345_set_bits(anx6345->map[I2C_IDX_DPTX],
> > + SP_DP_SYSTEM_CTRL_BASE + 3,
> > + SP_HPD_FORCE | SP_HPD_CTRL);
> > + if (err)
> > + return err;
> > +
> > + for (i = 0; i < 4; i++) {
> > + /* 4 lanes */
> > + err = regmap_write(anx6345->map[I2C_IDX_DPTX],
> > + SP_DP_LANE0_LT_CTRL_REG + i, 0);
> > + if (err)
> > + return err;
> > + }
> > +
> > + /* Reset AUX */
> > + err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM],
> > + SP_RESET_CTRL2_REG, SP_AUX_RST);
> > + if (err)
> > + return err;
> > +
> > + return anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
> > + SP_RESET_CTRL2_REG, SP_AUX_RST);
> > +}
> > +
> > +static void anx6345_poweron(struct anx6345 *anx6345)
> > +{
> > + int err;
> > +
> > + /* Ensure reset is asserted before starting power on sequence */
> > + gpiod_set_value_cansleep(anx6345->gpiod_reset, 1);
> > + usleep_range(1000, 2000);
> > +
> > + err = regulator_enable(anx6345->dvdd12);
> > + if (err) {
> > + DRM_ERROR("Failed to enable dvdd12 regulator: %d\n",
> > + err);
> > + return;
> > + }
> > +
> > + /* T1 - delay between VDD12 and VDD25 should be 0-2ms */
> > + usleep_range(1000, 2000);
> > +
> > + err = regulator_enable(anx6345->dvdd25);
> > + if (err) {
> > + DRM_ERROR("Failed to enable dvdd25 regulator: %d\n",
> > + err);
> > + return;
> > + }
> > +
> > + /* T2 - delay between RESETN and all power rail stable,
> > + * should be 2-5ms
> > + */
> > + usleep_range(2000, 5000);
> > +
> > + gpiod_set_value_cansleep(anx6345->gpiod_reset, 0);
> > +
> > + /* Power on registers module */
> > + anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG,
> > + SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
> > + anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG,
> > + SP_REGISTER_PD | SP_TOTAL_PD);
> > +
> > + if (anx6345->panel)
> > + drm_panel_prepare(anx6345->panel);
> > +
> > + anx6345->powered = true;
> > +}
> > +
> > +static void anx6345_poweroff(struct anx6345 *anx6345)
> > +{
> > + int err;
> > +
> > + gpiod_set_value_cansleep(anx6345->gpiod_reset, 1);
> > + usleep_range(1000, 2000);
> > +
> > + if (anx6345->panel)
> > + drm_panel_unprepare(anx6345->panel);
> > +
> > + err = regulator_disable(anx6345->dvdd25);
> > + if (err) {
> > + DRM_ERROR("Failed to disable dvdd25 regulator: %d\n",
> > + err);
> > + return;
> > + }
> > +
> > + usleep_range(5000, 10000);
> > +
> > + err = regulator_disable(anx6345->dvdd12);
> > + if (err) {
> > + DRM_ERROR("Failed to disable dvdd12 regulator: %d\n",
> > + err);
> > + return;
> > + }
> > +
> > + usleep_range(1000, 2000);
> > +
> > + anx6345->powered = false;
> > +}
> > +
> > +static int anx6345_start(struct anx6345 *anx6345)
> > +{
> > + int err;
> > +
> > + if (!anx6345->powered)
> > + anx6345_poweron(anx6345);
> > +
> > + /* Power on needed modules */
> > + err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
> > + SP_POWERDOWN_CTRL_REG,
> > + SP_VIDEO_PD | SP_LINK_PD);
> > +
> > + err = anx6345_tx_initialization(anx6345);
> > + if (err) {
> > + DRM_ERROR("Failed eDP transmitter initialization: %d\n", err);
> > + anx6345_poweroff(anx6345);
> > + return err;
> > + }
> > +
> > + err = anx6345_dp_link_training(anx6345);
> > + if (err) {
> > + DRM_ERROR("Failed link training: %d\n", err);
> > + anx6345_poweroff(anx6345);
> > + return err;
> > + }
> > +
> > + /*
> > + * This delay seems to help keep the hardware in a good state. Without
> > + * it, there are times where it fails silently.
> > + */
> > + usleep_range(10000, 15000);
> > +
> > + return 0;
> > +}
> > +
> > +static int anx6345_config_dp_output(struct anx6345 *anx6345)
> > +{
> > + int err;
> > +
> > + err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG,
> > + SP_VIDEO_MUTE);
> > + if (err)
> > + return err;
> > +
> > + /* Enable DP output */
> > + err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG,
> > + SP_VIDEO_EN);
> > + if (err)
> > + return err;
> > +
> > + /* Force stream valid */
> > + return anx6345_set_bits(anx6345->map[I2C_IDX_DPTX],
> > + SP_DP_SYSTEM_CTRL_BASE + 3,
> > + SP_STRM_FORCE | SP_STRM_CTRL);
> > +}
> > +
> > +static int anx6345_get_downstream_info(struct anx6345 *anx6345)
> > +{
> > + u8 value;
> > + int err;
> > +
> > + err = drm_dp_dpcd_readb(&anx6345->aux, DP_SINK_COUNT, &value);
> > + if (err < 0) {
> > + DRM_ERROR("Get sink count failed %d\n", err);
> > + return err;
> > + }
> > +
> > + if (!DP_GET_SINK_COUNT(value)) {
> > + DRM_ERROR("Downstream disconnected\n");
> > + return -EIO;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int anx6345_get_modes(struct drm_connector *connector)
> > +{
> > + struct anx6345 *anx6345 = connector_to_anx6345(connector);
> > + int err, num_modes = 0;
> > + bool power_off = false;
> > +
> > + mutex_lock(&anx6345->lock);
> > +
> > + if (!anx6345->edid) {
> > + if (!anx6345->powered) {
> > + anx6345_poweron(anx6345);
> > + power_off = true;
> > + }
> > +
> > + err = anx6345_get_downstream_info(anx6345);
> > + if (err) {
> > + DRM_ERROR("Failed to get downstream info: %d\n", err);
> > + goto unlock;
> > + }
> > +
> > + anx6345->edid = drm_get_edid(connector, &anx6345->aux.ddc);
> > + if (!anx6345->edid)
> > + DRM_ERROR("Failed to read EDID from panel\n");
> > +
> > + err = drm_connector_update_edid_property(connector,
> > + anx6345->edid);
> > + if (err) {
> > + DRM_ERROR("Failed to update EDID property: %d\n", err);
> > + goto unlock;
> > + }
> > + }
> > +
> > + num_modes += drm_add_edid_modes(connector, anx6345->edid);
> > +
> > +unlock:
> > + if (power_off)
> > + anx6345_poweroff(anx6345);
> > +
> > + mutex_unlock(&anx6345->lock);
> > +
> > + if (!num_modes && anx6345->panel)
> > + num_modes += drm_panel_get_modes(anx6345->panel);
> > +
> > + return num_modes;
> > +}
> > +
> > +static const struct drm_connector_helper_funcs anx6345_connector_helper_funcs = {
> > + .get_modes = anx6345_get_modes,
> > +};
> > +
> > +static void
> > +anx6345_connector_destroy(struct drm_connector *connector)
> > +{
> > + struct anx6345 *anx6345 = connector_to_anx6345(connector);
> > +
> > + if (anx6345->panel)
> > + drm_panel_detach(anx6345->panel);
> > + drm_connector_cleanup(connector);
> > +}
> > +
> > +static const struct drm_connector_funcs anx6345_connector_funcs = {
> > + .fill_modes = drm_helper_probe_single_connector_modes,
> > + .destroy = anx6345_connector_destroy,
> > + .reset = drm_atomic_helper_connector_reset,
> > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> > +};
> > +
> > +static int anx6345_bridge_attach(struct drm_bridge *bridge)
> > +{
> > + struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
> > + int err;
> > +
> > + if (!bridge->encoder) {
> > + DRM_ERROR("Parent encoder object not found");
> > + return -ENODEV;
> > + }
> > +
> > + /* Register aux channel */
> > + anx6345->aux.name = "DP-AUX";
> > + anx6345->aux.dev = &anx6345->client->dev;
> > + anx6345->aux.transfer = anx6345_aux_transfer;
> > +
> > + err = drm_dp_aux_register(&anx6345->aux);
> > + if (err < 0) {
> > + DRM_ERROR("Failed to register aux channel: %d\n", err);
> > + return err;
> > + }
> > +
> > + err = drm_connector_init(bridge->dev, &anx6345->connector,
> > + &anx6345_connector_funcs,
> > + DRM_MODE_CONNECTOR_eDP);
> > + if (err) {
> > + DRM_ERROR("Failed to initialize connector: %d\n", err);
> > + return err;
> > + }
> > +
> > + drm_connector_helper_add(&anx6345->connector,
> > + &anx6345_connector_helper_funcs);
> > +
> > + err = drm_connector_register(&anx6345->connector);
> > + if (err) {
> > + DRM_ERROR("Failed to register connector: %d\n", err);
> > + return err;
> > + }
> > +
> > + anx6345->connector.polled = DRM_CONNECTOR_POLL_HPD;
> > +
> > + err = drm_connector_attach_encoder(&anx6345->connector,
> > + bridge->encoder);
> > + if (err) {
> > + DRM_ERROR("Failed to link up connector to encoder: %d\n", err);
> > + return err;
> > + }
> > +
> > + if (anx6345->panel) {
> > + err = drm_panel_attach(anx6345->panel, &anx6345->connector);
> > + if (err) {
> > + DRM_ERROR("Failed to attach panel: %d\n", err);
> > + return err;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static enum drm_mode_status
> > +anx6345_bridge_mode_valid(struct drm_bridge *bridge,
> > + const struct drm_display_mode *mode)
> > +{
> > + if (mode->flags & DRM_MODE_FLAG_INTERLACE)
> > + return MODE_NO_INTERLACE;
> > +
> > + /* Max 1200p at 5.4 Ghz, one lane */
> > + if (mode->clock > 154000)
> > + return MODE_CLOCK_HIGH;
> > +
> > + return MODE_OK;
> > +}
> > +
> > +static void anx6345_bridge_disable(struct drm_bridge *bridge)
> > +{
> > + struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
> > +
> > + /* Power off all modules except configuration registers access */
> > + anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG,
> > + SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
> > + if (anx6345->panel)
> > + drm_panel_disable(anx6345->panel);
> > +
> > + if (anx6345->powered)
> > + anx6345_poweroff(anx6345);
> > +}
> > +
> > +static void anx6345_bridge_enable(struct drm_bridge *bridge)
> > +{
> > + struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
> > + int err;
> > +
> > + if (anx6345->panel)
> > + drm_panel_enable(anx6345->panel);
> > +
> > + err = anx6345_start(anx6345);
> > + if (err) {
> > + DRM_ERROR("Failed to initialize: %d\n", err);
> > + return;
> > + }
> > +
> > + err = anx6345_config_dp_output(anx6345);
> > + if (err)
> > + DRM_ERROR("Failed to enable DP output: %d\n", err);
> > +}
> > +
> > +static const struct drm_bridge_funcs anx6345_bridge_funcs = {
> > + .attach = anx6345_bridge_attach,
> > + .mode_valid = anx6345_bridge_mode_valid,
> > + .disable = anx6345_bridge_disable,
> > + .enable = anx6345_bridge_enable,
> > +};
> > +
> > +static void unregister_i2c_dummy_clients(struct anx6345 *anx6345)
> > +{
> > + unsigned int i;
> > +
> > + for (i = 1; i < ARRAY_SIZE(anx6345->i2c_clients); i++)
> > + if (anx6345->i2c_clients[i] &&
> > + anx6345->i2c_clients[i]->addr != anx6345->client->addr)
> > + i2c_unregister_device(anx6345->i2c_clients[i]);
> > +}
> > +
> > +static const struct regmap_config anx6345_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > + .max_register = 0xff,
> > + .cache_type = REGCACHE_NONE,
> > +};
> > +
> > +static const u16 anx6345_chipid_list[] = {
> > + 0x6345,
> > +};
> > +
> > +static bool anx6345_get_chip_id(struct anx6345 *anx6345)
> > +{
> > + unsigned int i, idl, idh, version;
> > +
> > + if (regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_IDL_REG, &idl))
> > + return false;
> > +
> > + if (regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_IDH_REG, &idh))
> > + return false;
> > +
> > + anx6345->chipid = (u8)idl | ((u8)idh << 8);
> > +
> > + if (regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_VERSION_REG,
> > + &version))
> > + return false;
> > +
> > + for (i = 0; i < ARRAY_SIZE(anx6345_chipid_list); i++) {
> > + if (anx6345->chipid == anx6345_chipid_list[i]) {
> > + DRM_INFO("Found ANX%x (ver. %d) eDP Transmitter\n",
> > + anx6345->chipid, version);
> > + return true;
> > + }
> > + }
> > +
> > + DRM_ERROR("ANX%x (ver. %d) not supported by this driver\n",
> > + anx6345->chipid, version);
> > +
> > + return false;
> > +}
> > +
> > +static int anx6345_i2c_probe(struct i2c_client *client,
> > + const struct i2c_device_id *id)
> > +{
> > + struct anx6345 *anx6345;
> > + struct device *dev;
> > + int i, err;
> > +
> > + anx6345 = devm_kzalloc(&client->dev, sizeof(*anx6345), GFP_KERNEL);
> > + if (!anx6345)
> > + return -ENOMEM;
> > +
> > + mutex_init(&anx6345->lock);
> > +
> > + anx6345->bridge.of_node = client->dev.of_node;
> > +
> > + anx6345->client = client;
> > + i2c_set_clientdata(client, anx6345);
> > +
> > + dev = &anx6345->client->dev;
> > +
> > + err = drm_of_find_panel_or_bridge(client->dev.of_node, 1, 0,
> > + &anx6345->panel, NULL);
> > + if (err == -EPROBE_DEFER)
> > + return err;
> > +
> > + if (err)
> > + DRM_DEBUG("No panel found\n");
> > +
> > + /* 1.2V digital core power regulator */
> > + anx6345->dvdd12 = devm_regulator_get(dev, "dvdd12-supply");
> > + if (IS_ERR(anx6345->dvdd12)) {
> > + DRM_ERROR("dvdd12-supply not found\n");
> > + return PTR_ERR(anx6345->dvdd12);
> > + }
> > +
> > + /* 2.5V digital core power regulator */
> > + anx6345->dvdd25 = devm_regulator_get(dev, "dvdd25-supply");
> > + if (IS_ERR(anx6345->dvdd25)) {
> > + DRM_ERROR("dvdd25-supply not found\n");
> > + return PTR_ERR(anx6345->dvdd25);
> > + }
> > +
> > + /* GPIO for chip reset */
> > + anx6345->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> > + if (IS_ERR(anx6345->gpiod_reset)) {
> > + DRM_ERROR("Reset gpio not found\n");
> > + return PTR_ERR(anx6345->gpiod_reset);
> > + }
> > +
> > + /* Map slave addresses of ANX6345 */
> > + for (i = 0; i < I2C_NUM_ADDRESSES; i++) {
> > + if (anx6345_i2c_addresses[i] >> 1 != client->addr)
> > + anx6345->i2c_clients[i] = i2c_new_dummy(client->adapter,
> > + anx6345_i2c_addresses[i] >> 1);
> > + else
> > + anx6345->i2c_clients[i] = client;
> > +
> > + if (!anx6345->i2c_clients[i]) {
> > + err = -ENOMEM;
> > + DRM_ERROR("Failed to reserve I2C bus %02x\n",
> > + anx6345_i2c_addresses[i]);
> > + goto err_unregister_i2c;
> > + }
> > +
> > + anx6345->map[i] = devm_regmap_init_i2c(anx6345->i2c_clients[i],
> > + &anx6345_regmap_config);
> > + if (IS_ERR(anx6345->map[i])) {
> > + err = PTR_ERR(anx6345->map[i]);
> > + DRM_ERROR("Failed regmap initialization %02x\n",
> > + anx6345_i2c_addresses[i]);
> > + goto err_unregister_i2c;
> > + }
> > + }
> > +
> > + /* Look for supported chip ID */
> > + anx6345_poweron(anx6345);
> > + if (anx6345_get_chip_id(anx6345)) {
> > + anx6345->bridge.funcs = &anx6345_bridge_funcs;
> > + drm_bridge_add(&anx6345->bridge);
> > +
> > + return 0;
> > + } else {
> > + anx6345_poweroff(anx6345);
> > + err = -ENODEV;
> > + }
> > +
> > +err_unregister_i2c:
> > + unregister_i2c_dummy_clients(anx6345);
> > + return err;
> > +}
> > +
> > +static int anx6345_i2c_remove(struct i2c_client *client)
> > +{
> > + struct anx6345 *anx6345 = i2c_get_clientdata(client);
> > +
> > + drm_bridge_remove(&anx6345->bridge);
> > +
> > + unregister_i2c_dummy_clients(anx6345);
> > +
> > + kfree(anx6345->edid);
> > +
> > + mutex_destroy(&anx6345->lock);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct i2c_device_id anx6345_id[] = {
> > + { "anx6345", 0 },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(i2c, anx6345_id);
> > +
> > +static const struct of_device_id anx6345_match_table[] = {
> > + { .compatible = "analogix,anx6345", },
> > + { /* sentinel */ },
> > +};
> > +MODULE_DEVICE_TABLE(of, anx6345_match_table);
> > +
> > +static struct i2c_driver anx6345_driver = {
> > + .driver = {
> > + .name = "anx6345",
> > + .of_match_table = of_match_ptr(anx6345_match_table),
> > + },
> > + .probe = anx6345_i2c_probe,
> > + .remove = anx6345_i2c_remove,
> > + .id_table = anx6345_id,
> > +};
> > +module_i2c_driver(anx6345_driver);
> > +
> > +MODULE_DESCRIPTION("ANX6345 eDP Transmitter driver");
> > +MODULE_AUTHOR("Enric Balletbo i Serra <enric.balletbo@...labora.com>");
>
> I believe Icenowy is the author of this driver. If you think otherwise
> please add Enric to CC and get his Signed-off-by.
>
I think that the only reason my name appears here is because is a
copy/paste from analogix-anx78xx.c (probably this driver took that
file as a reference?). Indeed I am not the author of this driver, so
Icenowy should be here, not me.
Thanks,
Enric
> > +MODULE_LICENSE("GPL v2");
> _______________________________________________
> dri-devel mailing list
> dri-devel@...ts.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Powered by blists - more mailing lists