| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190725162642.250709-2-mka@chromium.org>
Date: Thu, 25 Jul 2019 09:26:38 -0700
From: Matthias Kaehlcke <mka@...omium.org>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Heiko Stuebner <heiko@...ech.de>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
Matthias Kaehlcke <mka@...omium.org>
Subject: [PATCH v3 1/5] ARM: dts: rockchip: move rk3288-veryon display settings into a separate file
The chromebook .dtsi file contains common settings for veyron
Chromebooks with eDP displays. Some veyron devices with a display
aren't Chromebooks (e.g. 'tiger' aka 'AOpen Chromebase Mini'), move
display related bits from the chromebook .dtsi into a separate file
to avoid redundant DT settings.
The new file is included from the chromebook .dtsi and can be
included by non-Chromebook devices with a display.
Signed-off-by: Matthias Kaehlcke <mka@...omium.org>
---
Changes in v3:
- allow MIT license
- move pinctrl section to the bottom
Changes in v2:
- rebased on v5.4-armsoc/dts32 (0d19541e3b45)
---
.../boot/dts/rk3288-veyron-chromebook.dtsi | 115 +---------------
arch/arm/boot/dts/rk3288-veyron-edp.dtsi | 124 ++++++++++++++++++
2 files changed, 125 insertions(+), 114 deletions(-)
create mode 100644 arch/arm/boot/dts/rk3288-veyron-edp.dtsi
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index 6a28ce345ba0..ffb60f880b39 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/input/input.h>
#include "rk3288-veyron.dtsi"
#include "rk3288-veyron-analog-audio.dtsi"
+#include "rk3288-veyron-edp.dtsi"
#include "rk3288-veyron-sdmmc.dtsi"
/ {
@@ -18,50 +19,6 @@
i2c20 = &i2c_tunnel;
};
- backlight: backlight {
- compatible = "pwm-backlight";
- brightness-levels = <
- 0 1 2 3 4 5 6 7
- 8 9 10 11 12 13 14 15
- 16 17 18 19 20 21 22 23
- 24 25 26 27 28 29 30 31
- 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47
- 48 49 50 51 52 53 54 55
- 56 57 58 59 60 61 62 63
- 64 65 66 67 68 69 70 71
- 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87
- 88 89 90 91 92 93 94 95
- 96 97 98 99 100 101 102 103
- 104 105 106 107 108 109 110 111
- 112 113 114 115 116 117 118 119
- 120 121 122 123 124 125 126 127
- 128 129 130 131 132 133 134 135
- 136 137 138 139 140 141 142 143
- 144 145 146 147 148 149 150 151
- 152 153 154 155 156 157 158 159
- 160 161 162 163 164 165 166 167
- 168 169 170 171 172 173 174 175
- 176 177 178 179 180 181 182 183
- 184 185 186 187 188 189 190 191
- 192 193 194 195 196 197 198 199
- 200 201 202 203 204 205 206 207
- 208 209 210 211 212 213 214 215
- 216 217 218 219 220 221 222 223
- 224 225 226 227 228 229 230 231
- 232 233 234 235 236 237 238 239
- 240 241 242 243 244 245 246 247
- 248 249 250 251 252 253 254 255>;
- default-brightness-level = <128>;
- enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&bl_en>;
- pwms = <&pwm0 0 1000000 0>;
- post-pwm-on-delay-ms = <10>;
- pwm-off-delay-ms = <10>;
- };
-
gpio-charger {
compatible = "gpio-charger";
charger-type = "mains";
@@ -85,35 +42,6 @@
};
};
- panel: panel {
- compatible ="innolux,n116bge", "simple-panel";
- status = "okay";
- power-supply = <&vcc33_lcd>;
- backlight = <&backlight>;
-
- panel-timing {
- clock-frequency = <74250000>;
- hactive = <1366>;
- hfront-porch = <136>;
- hback-porch = <60>;
- hsync-len = <30>;
- hsync-active = <0>;
- vactive = <768>;
- vfront-porch = <8>;
- vback-porch = <12>;
- vsync-len = <12>;
- vsync-active = <0>;
- };
-
- ports {
- panel_in: port {
- panel_in_edp: endpoint {
- remote-endpoint = <&edp_out_panel>;
- };
- };
- };
- };
-
/* A non-regulated voltage from power supply or battery */
vccsys: vccsys {
compatible = "regulator-fixed";
@@ -155,33 +83,6 @@
};
};
-&edp {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&edp_hpd>;
-
- ports {
- edp_out: port@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
- edp_out_panel: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_in_edp>;
- };
- };
- };
-};
-
-&edp_phy {
- status = "okay";
-};
-
-&pwm0 {
- status = "okay";
-};
-
&rk808 {
vcc11-supply = <&vcc_5v>;
@@ -234,14 +135,6 @@
};
};
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
&pinctrl {
pinctrl-0 = <
/* Common for sleep and wake, but no owners */
@@ -264,12 +157,6 @@
&bt_dev_wake_sleep
>;
- backlight {
- bl_en: bl-en {
- rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
buttons {
ap_lid_int_l: ap-lid-int-l {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
new file mode 100644
index 000000000000..c36fb0940478
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron (and derivatives) fragment for the edp displays
+ *
+ * Copyright 2019 Google LLC
+ */
+
+/ {
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7
+ 8 9 10 11 12 13 14 15
+ 16 17 18 19 20 21 22 23
+ 24 25 26 27 28 29 30 31
+ 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47
+ 48 49 50 51 52 53 54 55
+ 56 57 58 59 60 61 62 63
+ 64 65 66 67 68 69 70 71
+ 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87
+ 88 89 90 91 92 93 94 95
+ 96 97 98 99 100 101 102 103
+ 104 105 106 107 108 109 110 111
+ 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127
+ 128 129 130 131 132 133 134 135
+ 136 137 138 139 140 141 142 143
+ 144 145 146 147 148 149 150 151
+ 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167
+ 168 169 170 171 172 173 174 175
+ 176 177 178 179 180 181 182 183
+ 184 185 186 187 188 189 190 191
+ 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207
+ 208 209 210 211 212 213 214 215
+ 216 217 218 219 220 221 222 223
+ 224 225 226 227 228 229 230 231
+ 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247
+ 248 249 250 251 252 253 254 255>;
+ default-brightness-level = <128>;
+ enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_en>;
+ pwms = <&pwm0 0 1000000 0>;
+ post-pwm-on-delay-ms = <10>;
+ pwm-off-delay-ms = <10>;
+ };
+
+ panel: panel {
+ compatible ="innolux,n116bge", "simple-panel";
+ status = "okay";
+ power-supply = <&vcc33_lcd>;
+ backlight = <&backlight>;
+
+ panel-timing {
+ clock-frequency = <74250000>;
+ hactive = <1366>;
+ hfront-porch = <136>;
+ hback-porch = <60>;
+ hsync-len = <30>;
+ hsync-active = <0>;
+ vactive = <768>;
+ vfront-porch = <8>;
+ vback-porch = <12>;
+ vsync-len = <12>;
+ vsync-active = <0>;
+ };
+
+ ports {
+ panel_in: port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&edp_out_panel>;
+ };
+ };
+ };
+ };
+};
+
+&edp {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_hpd>;
+
+ ports {
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ edp_out_panel: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+};
+
+&edp_phy {
+ status = "okay";
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&pinctrl {
+ backlight {
+ bl_en: bl-en {
+ rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
--
2.22.0.709.g102302147b-goog
Powered by blists - more mailing lists