| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2019011.7K24B7Jytf@kreacher>
Date: Fri, 26 Jul 2019 00:56:11 +0200
From: "Rafael J. Wysocki" <rjw@...ysocki.net>
To: Linux ACPI <linux-acpi@...r.kernel.org>
Cc: Linux PM <linux-pm@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
Zhang Rui <rui.zhang@...el.com>,
Rajneesh Bhardwaj <rajneesh.bhardwaj@...ux.intel.com>
Subject: [PATCH 4/4] ACPI: PM: s2idle: Add acpi_sleep=no_lps0 command line switch
From: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
Add a kernel command line switch to prevent the LPS0 _DSM funtions
from being invoked (if need be) and rework the suspend-to-idle
blacklist entries in acpisleep_dmi_table[] to make them simply
prevent suspend-to-idle from being used by default on the systems
in question (which really is the original purpose of those entries).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
---
Documentation/admin-guide/kernel-parameters.txt | 5 ++-
arch/x86/kernel/acpi/sleep.c | 2 +
drivers/acpi/sleep.c | 34 +++++++++++++++---------
include/linux/acpi.h | 1
4 files changed, 29 insertions(+), 13 deletions(-)
Index: linux-pm/drivers/acpi/sleep.c
===================================================================
--- linux-pm.orig/drivers/acpi/sleep.c
+++ linux-pm/drivers/acpi/sleep.c
@@ -158,11 +158,19 @@ static int __init init_nvs_nosave(const
return 0;
}
-static bool acpi_sleep_no_lps0;
+#define ACPI_SLEEP_AVOID_LPS0_DSM BIT(0)
+#define ACPI_SLEEP_DEFAULT_S3 BIT(1)
-static int __init init_no_lps0(const struct dmi_system_id *d)
+static u8 acpi_sleep_lps0_flags;
+
+void __init acpi_sleep_init_no_lps0(void)
+{
+ acpi_sleep_lps0_flags |= ACPI_SLEEP_AVOID_LPS0_DSM;
+}
+
+static int __init init_default_s3(const struct dmi_system_id *d)
{
- acpi_sleep_no_lps0 = true;
+ acpi_sleep_lps0_flags |= ACPI_SLEEP_DEFAULT_S3;
return 0;
}
@@ -363,7 +371,7 @@ static const struct dmi_system_id acpisl
* S0 Idle firmware interface.
*/
{
- .callback = init_no_lps0,
+ .callback = init_default_s3,
.ident = "Dell XPS13 9360",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
@@ -376,7 +384,7 @@ static const struct dmi_system_id acpisl
* https://bugzilla.kernel.org/show_bug.cgi?id=199057).
*/
{
- .callback = init_no_lps0,
+ .callback = init_default_s3,
.ident = "ThinkPad X1 Tablet(2016)",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
@@ -525,7 +533,7 @@ static void acpi_pm_end(void)
}
#else /* !CONFIG_ACPI_SLEEP */
#define acpi_target_sleep_state ACPI_STATE_S0
-#define acpi_sleep_no_lps0 (false)
+#define acpi_sleep_lps0_flags (0)
static inline void acpi_sleep_dmi_check(void) {}
#endif /* CONFIG_ACPI_SLEEP */
@@ -904,15 +912,15 @@ static int lps0_device_attach(struct acp
if (lps0_device_handle)
return 0;
- if (acpi_sleep_no_lps0) {
+ if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
+ return 0;
+
+ if (acpi_sleep_lps0_flags & ACPI_SLEEP_AVOID_LPS0_DSM) {
acpi_handle_info(adev->handle,
"Low Power S0 Idle interface disabled\n");
- return 0;
+ goto default_sleep;
}
- if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
- return 0;
-
guid_parse(ACPI_LPS0_DSM_UUID, &lps0_dsm_guid);
/* Check if the _DSM is present and as expected. */
out_obj = acpi_evaluate_dsm(adev->handle, &lps0_dsm_guid, 1, 0, NULL);
@@ -933,11 +941,13 @@ static int lps0_device_attach(struct acp
lpi_device_get_constraints();
+default_sleep:
/*
* Use suspend-to-idle by default if the default suspend mode was not
* set from the command line.
*/
- if (mem_sleep_default > PM_SUSPEND_MEM)
+ if (mem_sleep_default > PM_SUSPEND_MEM &&
+ !(acpi_sleep_lps0_flags & ACPI_SLEEP_DEFAULT_S3))
mem_sleep_current = PM_SUSPEND_TO_IDLE;
return 0;
Index: linux-pm/include/linux/acpi.h
===================================================================
--- linux-pm.orig/include/linux/acpi.h
+++ linux-pm/include/linux/acpi.h
@@ -471,6 +471,7 @@ void __init acpi_old_suspend_ordering(vo
void __init acpi_nvs_nosave(void);
void __init acpi_nvs_nosave_s3(void);
void __init acpi_sleep_no_blacklist(void);
+void __init acpi_sleep_init_no_lps0(void);
#endif /* CONFIG_PM_SLEEP */
struct acpi_osc_context {
Index: linux-pm/arch/x86/kernel/acpi/sleep.c
===================================================================
--- linux-pm.orig/arch/x86/kernel/acpi/sleep.c
+++ linux-pm/arch/x86/kernel/acpi/sleep.c
@@ -137,6 +137,8 @@ static int __init acpi_sleep_setup(char
acpi_nvs_nosave_s3();
if (strncmp(str, "old_ordering", 12) == 0)
acpi_old_suspend_ordering();
+ if (strncmp(str, "no_lps0", 7) == 0)
+ acpi_sleep_init_no_lps0();
if (strncmp(str, "nobl", 4) == 0)
acpi_sleep_no_blacklist();
str = strchr(str, ',');
Index: linux-pm/Documentation/admin-guide/kernel-parameters.txt
===================================================================
--- linux-pm.orig/Documentation/admin-guide/kernel-parameters.txt
+++ linux-pm/Documentation/admin-guide/kernel-parameters.txt
@@ -222,7 +222,8 @@
acpi_sleep= [HW,ACPI] Sleep options
Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
- old_ordering, nonvs, sci_force_enable, nobl }
+ old_ordering, nonvs, sci_force_enable,
+ no_lps0, nobl }
See Documentation/power/video.rst for information on
s3_bios and s3_mode.
s3_beep is for debugging; it makes the PC's speaker beep
@@ -238,6 +239,8 @@
sci_force_enable causes the kernel to set SCI_EN directly
on resume from S1/S3 (which is against the ACPI spec,
but some broken systems don't work without it).
+ no_lps0 prevents the kernel from using the special
+ LPS0 device interface during suspend-to-idle.
nobl causes the internal blacklist of systems known to
behave incorrectly in some ways with respect to system
suspend and resume to be ignored (use wisely).
Powered by blists - more mailing lists