[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <fe11664c-4419-7ec3-c700-c5992dcb3efe@st.com>
Date: Thu, 25 Jul 2019 11:33:04 +0200
From: Alexandre Torgue <alexandre.torgue@...com>
To: Ludovic Barre <ludovic.Barre@...com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
CC: Maxime Coquelin <mcoquelin.stm32@...il.com>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>
Subject: Re: [PATCH] ARM: dts: stm32: activate dma for qspi on stm32mp157
Hi Ludovic
On 6/27/19 2:09 PM, Ludovic Barre wrote:
> From: Ludovic Barre <ludovic.barre@...com>
>
> This patch activates dma for qspi on stm32mp157.
>
> Signed-off-by: Ludovic Barre <ludovic.barre@...com>
> ---
> arch/arm/boot/dts/stm32mp157c.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
> index 2afeee6..205ea1d 100644
> --- a/arch/arm/boot/dts/stm32mp157c.dtsi
> +++ b/arch/arm/boot/dts/stm32mp157c.dtsi
> @@ -1074,6 +1074,9 @@
> reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
> reg-names = "qspi", "qspi_mm";
> interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>,
> + <&mdma1 22 0x10 0x100008 0x0 0x0>;
> + dma-names = "tx", "rx";
> clocks = <&rcc QSPI_K>;
> resets = <&rcc QSPI_R>;
> status = "disabled";
>
Applied on stm32-next.
Thanks.
Alex
Powered by blists - more mailing lists