linux-kernel - [PATCH v2 06/14] dt-bindings: cpufreq: qcom-nvmem: Support pstates provided by a power domain

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190725104144.22924-7-niklas.cassel@linaro.org>
Date:   Thu, 25 Jul 2019 12:41:34 +0200
From:   Niklas Cassel <niklas.cassel@...aro.org>
To:     Andy Gross <agross@...nel.org>, Ilia Lin <ilia.lin@...nel.org>,
        Viresh Kumar <vireshk@...nel.org>, Nishanth Menon <nm@...com>,
        Stephen Boyd <sboyd@...nel.org>
Cc:     linux-arm-msm@...r.kernel.org, jorge.ramirez-ortiz@...aro.org,
        bjorn.andersson@...aro.org, ulf.hansson@...aro.org,
        Niklas Cassel <niklas.cassel@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>, linux-pm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 06/14] dt-bindings: cpufreq: qcom-nvmem: Support pstates provided by a power domain

Some Qualcomm SoCs have support for Core Power Reduction (CPR).
On these platforms, we need to attach to the power domain provider
providing the performance states, so that the leaky device (the CPU)
can configure the performance states (which represent different
CPU clock frequencies).

Signed-off-by: Niklas Cassel <niklas.cassel@...aro.org>
---
 .../bindings/opp/qcom-nvmem-cpufreq.txt       | 111 ++++++++++++++++++
 1 file changed, 111 insertions(+)

diff --git a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
index c5ea8b90e35d..e19a95318e98 100644
--- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
+++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
@@ -23,6 +23,15 @@ In 'operating-points-v2' table:
 
 Optional properties:
 --------------------
+In 'cpus' nodes:
+- power-domains: A phandle pointing to the PM domain specifier which provides
+		the performance states available for active state management.
+		Please refer to the power-domains bindings
+		Documentation/devicetree/bindings/power/power_domain.txt
+		and also examples below.
+- power-domain-names: Should be
+	- 'cpr' for qcs404.
+
 In 'operating-points-v2' table:
 - nvmem-cells: A phandle pointing to a nvmem-cells node representing the
 		efuse registers that has information about the
@@ -682,3 +691,105 @@ soc {
 		};
 	};
 };
+
+Example 2:
+---------
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			....
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cprpd>;
+			power-domain-names = "cpr";
+		};
+
+		CPU1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			....
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cprpd>;
+			power-domain-names = "cpr";
+		};
+
+		CPU2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			....
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cprpd>;
+			power-domain-names = "cpr";
+		};
+
+		CPU3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			....
+			clocks = <&apcs_glb>;
+			operating-points-v2 = <&cpu_opp_table>;
+			power-domains = <&cprpd>;
+			power-domain-names = "cpr";
+		};
+	};
+
+	cpu_opp_table: cpu-opp-table {
+		compatible = "operating-points-v2-kryo-cpu";
+		opp-shared;
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			required-opps = <&cpr_opp1>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			required-opps = <&cpr_opp2>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 <1401600000>;
+			required-opps = <&cpr_opp3>;
+		};
+	};
+
+	cpr_opp_table: cpr-opp-table {
+		compatible = "operating-points-v2-qcom-level";
+
+		cpr_opp1: opp1 {
+			opp-level = <1>;
+			....
+		};
+		cpr_opp2: opp2 {
+			opp-level = <2>;
+			....
+		};
+		cpr_opp3: opp3 {
+			opp-level = <3>;
+			....
+		};
+	};
+
+....
+
+soc {
+....
+	cprpd: cpr@...8000 {
+		compatible = "qcom,qcs404-cpr", "qcom,cpr";
+		reg = <0x0b018000 0x1000>;
+		....
+		vdd-apc-supply = <&pms405_s3>;
+		#power-domain-cells = <0>;
+		operating-points-v2 = <&cpr_opp_table>;
+		....
+	};
+};
-- 
2.21.0