linux-kernel - Re: [PATCH v2 0/2] mmc: core: Fix Marvell WiFi reset by adding SDIO API to replug card

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAPDyKFoND5Kaam72zxO4wChO0z_1XL2KWX6oNjVcMUGA7G8RFg@mail.gmail.com>
Date:   Thu, 25 Jul 2019 15:28:11 +0200
From:   Ulf Hansson <ulf.hansson@...aro.org>
To:     Douglas Anderson <dianders@...omium.org>
Cc:     Kalle Valo <kvalo@...eaurora.org>,
        Adrian Hunter <adrian.hunter@...el.com>,
        Ganapathi Bhat <gbhat@...vell.com>,
        linux-wireless <linux-wireless@...r.kernel.org>,
        Andreas Fenkart <afenkart@...il.com>,
        Brian Norris <briannorris@...omium.org>,
        Amitkumar Karwar <amitkarwar@...il.com>,
        "open list:ARM/Rockchip SoC..." <linux-rockchip@...ts.infradead.org>,
        Wolfram Sang <wsa+renesas@...g-engineering.com>,
        Nishant Sarmukadam <nishants@...vell.com>,
        netdev <netdev@...r.kernel.org>,
        Avri Altman <avri.altman@....com>,
        "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
        "David S. Miller" <davem@...emloft.net>,
        Xinming Hu <huxinming820@...il.com>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Thomas Gleixner <tglx@...utronix.de>,
        Kate Stewart <kstewart@...uxfoundation.org>
Subject: Re: [PATCH v2 0/2] mmc: core: Fix Marvell WiFi reset by adding SDIO
 API to replug card

On Mon, 22 Jul 2019 at 21:41, Douglas Anderson <dianders@...omium.org> wrote:
>
> As talked about in the thread at:
>
> http://lkml.kernel.org/r/CAD=FV=X7P2F1k_zwHc0mbtfk55-rucTz_GoDH=PL6zWqKYcpuw@mail.gmail.com
>
> ...when the Marvell WiFi card tries to reset itself it kills
> Bluetooth.  It was observed that we could re-init the card properly by
> unbinding / rebinding the host controller.  It was also observed that
> in the downstream Chrome OS codebase the solution used was
> mmc_remove_host() / mmc_add_host(), which is similar to the solution
> in this series.
>
> So far I've only done testing of this series using the reset test
> source that can be simulated via sysfs.  Specifically I ran this test:
>
> for i in $(seq 1000); do
>   echo "LOOP $i --------"
>   echo 1 > /sys/kernel/debug/mwifiex/mlan0/reset
>
>   while true; do
>     if ! ping -w15 -c1 "${GW}" >/dev/null 2>&1; then
>       fail=$(( fail + 1 ))
>       echo "Fail WiFi ${fail}"
>       if [[ ${fail} == 3 ]]; then
>         exit 1
>       fi
>     else
>       fail=0
>       break
>     fi
>   done
>
>   hciconfig hci0 down
>   sleep 1
>   if ! hciconfig hci0 up; then
>     echo "Fail BT"
>     exit 1
>   fi
> done
>
> I ran this several times and got several hundred iterations each
> before a failure.  When I saw failures:
>
> * Once I saw a "Fail BT"; manually resetting the card again fixed it.
>   I didn't give it time to see if it would have detected this
>   automatically.
> * Once I saw the ping fail because (for some reason) my device only
>   got an IPv6 address from my router and the IPv4 ping failed.  I
>   changed my script to use 'ping6' to see if that would help.
> * Once I saw the ping fail because the higher level network stack
>   ("shill" in my case) seemed to crash.  A few minutes later the
>   system recovered itself automatically.  https://crbug.com/984593 if
>   you want more details.
> * Sometimes while I was testing I saw "Fail WiFi 1" indicating a
>   transitory failure.  Usually this was an association failure, but in
>   one case I saw the device do "Firmware wakeup failed" after I
>   triggered the reset.  This caused the driver to trigger a re-reset
>   of itself which eventually recovered things.  This was good because
>   it was an actual test of the normal reset flow (not the one
>   triggered via sysfs).
>
> Changes in v2:
> - s/routnine/routine (Brian Norris, Matthias Kaehlcke).
> - s/contining/containing (Matthias Kaehlcke).
> - Add Matthias Reviewed-by tag.
> - Removed clear_bit() calls and old comment (Brian Norris).
> - Explicit CC of Andreas Fenkart.
> - Explicit CC of Brian Norris.
> - Add "Fixes" pointing at the commit Brian talked about.
> - Add Brian's Reviewed-by tag.
>
> Douglas Anderson (2):
>   mmc: core: Add sdio_trigger_replug() API
>   mwifiex: Make use of the new sdio_trigger_replug() API to reset
>
>  drivers/mmc/core/core.c                     | 28 +++++++++++++++++++--
>  drivers/mmc/core/sdio_io.c                  | 20 +++++++++++++++
>  drivers/net/wireless/marvell/mwifiex/sdio.c | 16 +-----------
>  include/linux/mmc/host.h                    | 15 ++++++++++-
>  include/linux/mmc/sdio_func.h               |  2 ++
>  5 files changed, 63 insertions(+), 18 deletions(-)
>

Doug, thanks for sending this!

As you know, I have been working on additional changes for SDIO
suspend/resume (still WIP and not ready for sharing) and this series
is related.

The thing is, that even during system suspend/resume, synchronizations
are needed between the different layers (mmc host, mmc core and
sdio-funcs), which is common to the problem you want to solve.

That said, I need to scratch my head a bit more before I can provide
you some feedback on $subject series. Moreover, it's vacation period
at my side so things are moving a bit slower. Please be patient.

Kind regards
Uffe