lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190726053959.2003-2-andrew@aj.id.au>
Date:   Fri, 26 Jul 2019 15:09:43 +0930
From:   Andrew Jeffery <andrew@...id.au>
To:     linux-aspeed@...ts.ozlabs.org
Cc:     Andrew Jeffery <andrew@...id.au>, robh+dt@...nel.org,
        mark.rutland@....com, joel@....id.au, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Stefan M Schaeckeler <sschaeck@...co.com>
Subject: [PATCH 01/17] ARM: dts: aspeed-g5: Move EDAC node to APB

Previously the register interface was not attached to any internal bus,
which is not correct - it lives on the APB.

Cc: Stefan M Schaeckeler <sschaeck@...co.com>
Signed-off-by: Andrew Jeffery <andrew@...id.au>
---
 arch/arm/boot/dts/aspeed-g5.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 5b1ca265c2ce..7723afc7c249 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -47,13 +47,6 @@
 		reg = <0x80000000 0>;
 	};
 
-	edac: sdram@...e0000 {
-		compatible = "aspeed,ast2500-sdram-edac";
-		reg = <0x1e6e0000 0x174>;
-		interrupts = <0>;
-		status = "disabled";
-	};
-
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -206,6 +199,13 @@
 			#size-cells = <1>;
 			ranges;
 
+			edac: sdram@...e0000 {
+				compatible = "aspeed,ast2500-sdram-edac";
+				reg = <0x1e6e0000 0x174>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
 			syscon: syscon@...e2000 {
 				compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1a8>;
-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ