| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190726081453.9456-4-m.szyprowski@samsung.com>
Date: Fri, 26 Jul 2019 10:14:53 +0200
From: Marek Szyprowski <m.szyprowski@...sung.com>
To: linux-usb@...r.kernel.org, linux-samsung-soc@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Markus Reichl <m.reichl@...etechno.de>,
Måns Rullgård <mans@...sr.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
Peter Chen <peter.chen@....com>,
Alan Stern <stern@...land.harvard.edu>,
Rob Herring <robh+dt@...nel.org>
Subject: [PATCH v2 3/3] ARM: dts: exynos: Use standard arrays of generic
PHYs for EHCI/OHCI devices
Move USB PHYs to a standard arrays for Exynos EHCI/OHCI devices. This
resolves the conflict between Exynos EHCI/OHCI sub-nodes and generic USB
device bindings. Once the Exynos EHCI/OHCI sub-nodes are removed, the
boards can finally provide sub-nodes for the USB devices using generic USB
device bindings.
Suggested-by: Måns Rullgård <mans@...sr.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@...sung.com>
---
arch/arm/boot/dts/exynos4.dtsi | 28 +++----------------
.../boot/dts/exynos4210-universal_c210.dts | 8 ++----
arch/arm/boot/dts/exynos4412-itop-elite.dts | 9 ++----
arch/arm/boot/dts/exynos4412-odroidu3.dts | 8 ++----
arch/arm/boot/dts/exynos4412-odroidx.dts | 5 ++--
arch/arm/boot/dts/exynos4412-origen.dts | 9 ++----
arch/arm/boot/dts/exynos5250.dtsi | 16 +++--------
arch/arm/boot/dts/exynos54xx.dtsi | 18 +++---------
8 files changed, 22 insertions(+), 79 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 1264cc431ff6..433f109d97ca 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -380,23 +380,8 @@
clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- phys = <&exynos_usbphy 1>;
- status = "disabled";
- };
- port@1 {
- reg = <1>;
- phys = <&exynos_usbphy 2>;
- status = "disabled";
- };
- port@2 {
- reg = <2>;
- phys = <&exynos_usbphy 3>;
- status = "disabled";
- };
+ phys = <&exynos_usbphy 1>, <&exynos_usbphy 2>, <&exynos_usbphy 3>;
+ phy-names = "host", "hsic0", "hsic1";
};
ohci: ohci@...90000 {
@@ -406,13 +391,8 @@
clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- phys = <&exynos_usbphy 1>;
- status = "disabled";
- };
+ phys = <&exynos_usbphy 1>;
+ phy-names = "host";
};
gpu: gpu@...00000 {
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 82a8b5449978..09d3d54d09ff 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -204,9 +204,8 @@
&ehci {
status = "okay";
- port@0 {
- status = "okay";
- };
+ phys = <&exynos_usbphy 1>;
+ phy-names = "host";
};
&exynos_usbphy {
@@ -520,9 +519,6 @@
&ohci {
status = "okay";
- port@0 {
- status = "okay";
- };
};
&pinctrl_1 {
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
index 0dedeba89b5f..f6d0a5f5d339 100644
--- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -146,13 +146,8 @@
/* In order to reset USB ethernet */
samsung,vbus-gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
- port@0 {
- status = "okay";
- };
-
- port@2 {
- status = "okay";
- };
+ phys = <&exynos_usbphy 1>, <&exynos_usbphy 3>;
+ phy-names = "host", "hsic1";
};
&exynos_usbphy {
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index 96d99887bceb..8ff243ba4542 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -105,12 +105,8 @@
};
&ehci {
- port@1 {
- status = "okay";
- };
- port@2 {
- status = "okay";
- };
+ phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
+ phy-names = "hsic0", "hsic1";
};
&sound {
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index a2251581f6b6..3ea2a0101e80 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -72,9 +72,8 @@
};
&ehci {
- port@1 {
- status = "okay";
- };
+ phys = <&exynos_usbphy 2>;
+ phy-names = "hsic0";
};
&mshc_0 {
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 698de4345d16..ecd14b283a6b 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -88,13 +88,8 @@
&ehci {
samsung,vbus-gpio = <&gpx3 5 1>;
status = "okay";
-
- port@1 {
- status = "okay";
- };
- port@2 {
- status = "okay";
- };
+ phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
+ phy-names = "hsic0", "hsic1";
};
&fimd {
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index d5e0392b409e..c5584f40ebfb 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -617,12 +617,8 @@
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- phys = <&usb2_phy_gen 1>;
- };
+ phys = <&usb2_phy_gen 1>;
+ phy-names = "host";
};
ohci: usb@...20000 {
@@ -632,12 +628,8 @@
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- phys = <&usb2_phy_gen 1>;
- };
+ phys = <&usb2_phy_gen 1>;
+ phy-names = "host";
};
usb2_phy_gen: phy@...30000 {
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 0b27bebf9528..9c3b63b7cac6 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -189,26 +189,16 @@
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- phys = <&usb2_phy 1>;
- };
+ phys = <&usb2_phy 1>;
+ phy-names = "host";
};
usbhost1: usb@...20000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- phys = <&usb2_phy 1>;
- };
+ phys = <&usb2_phy 1>;
+ phy-names = "host";
};
usb2_phy: phy@...30000 {
--
2.17.1
Powered by blists - more mailing lists