linux-kernel - Re: [PATCH 00/15] thermal: qcom: tsens: Add interrupt support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190726103605.GB3327@onstation.org>
Date:   Fri, 26 Jul 2019 06:36:05 -0400
From:   Brian Masney <masneyb@...tation.org>
To:     Amit Kucheria <amit.kucheria@...aro.org>
Cc:     linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        bjorn.andersson@...aro.org, edubezval@...il.com,
        andy.gross@...aro.org, Andy Gross <agross@...nel.org>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        Mark Rutland <mark.rutland@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Zhang Rui <rui.zhang@...el.com>, marc.w.gonzalez@...e.fr,
        devicetree@...r.kernel.org, linux-pm@...r.kernel.org
Subject: Re: [PATCH 00/15] thermal: qcom: tsens: Add interrupt support

Hi Amit,

On Fri, Jul 26, 2019 at 03:48:35AM +0530, Amit Kucheria wrote:
> Add interrupt support to TSENS. The first 6 patches are general fixes and
> cleanups to the driver before interrupt support is introduced.
> 
> This series has been developed against qcs404 and sdm845 and then tested on
> msm8916. Testing on msm8998 and msm8974 would be appreciated since I don't
> have hardware handy. Further, I plan to test on msm8996 and also submit to
> kernelci.
> 
> I'm sending this out for more review to get help with testing.

I can test this on msm8974 for you using a Nexus 5. Here's what I've
done so far:

The device tree nodes appear in sysfs:

/ # ls -1 /sys/class/thermal/
cooling_device0
cooling_device1
thermal_zone0
thermal_zone1
thermal_zone2
thermal_zone3
thermal_zone4
thermal_zone5
thermal_zone6
thermal_zone7
thermal_zone8
thermal_zone9

The various temperatures were in the upper 40s and I threw some work at
all four CPU cores to warm up the phone and watched the various
temperatures rise:

/ # for i in $(seq 0 9) ; do
> TYPE=$(cat /sys/class/thermal/thermal_zone$i/type)
> TEMP=$(cat /sys/class/thermal/thermal_zone$i/temp)
> echo "$TYPE = $TEMP"
> done
cpu-thermal0 = 66000
cpu-thermal1 = 66000
cpu-thermal2 = 66000
cpu-thermal3 = 66000
q6-dsp-thermal = 60000
modemtx-thermal = 57000
video-thermal = 61000
wlan-thermal = 65000
gpu-thermal-top = 61000
gpu-thermal-bottom = 59000

To test the interrupt support, I lowered all of the temperature trips to
51C but I'm not sure where to read that notification. I assume one of
the cooling devices or a governor should be started? Sorry but I haven't
done any work in the thermal subsystem yet and I'm short on time this
morning to investigate right now.

Brian