lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1564147640-30753-3-git-send-email-open.sudheer@gmail.com>
Date:   Fri, 26 Jul 2019 18:57:17 +0530
From:   "sudheer.v" <open.sudheer@...il.com>
To:     gregkh@...uxfoundation.org, jslaby@...e.com, joel@....id.au,
        andrew@...id.au, benh@...nel.crashing.org, robh+dt@...nel.org,
        mark.rutland@....com,
        shivahshankar.shankarnarayanrao@...eedtech.com,
        sudheer.veliseti@...eedtech.com
Cc:     sudheer veliseti <sudheer.open@...il.com>,
        linux-kernel@...r.kernel.org, linux-serial@...r.kernel.org,
        devicetree@...r.kernel.org, linux-aspeed@...ts.ozlabs.org
Subject: [patch v4 2/5] build configuration for AST2500 DMA UART driver

From: sudheer veliseti <sudheer.open@...il.com>

build config for DMA based UART driver in AST2500.
Total Available  UARTs in AST2500 are 4

Signed-off-by: sudheer veliseti <sudheer.open@...il.com>
---

Changes from v3->v4:
- config name changed to SERIAL_AST_DMA_UART  
- new config AST_UART_DMA_RX_INTERRUPT  introduced 
  for selectin between  DMA interrupt based RX vs timer based uart RX

Changes in v2->v3:
- change logs added

drivers/tty/serial/8250/Kconfig  | 43 ++++++++++++++++++++++++++++++++
 drivers/tty/serial/8250/Makefile |  1 +
 2 files changed, 44 insertions(+)

diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 15c2c5463835..7052ab0f4894 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -189,6 +189,49 @@ config SERIAL_8250_RUNTIME_UARTS
 	  with the module parameter "nr_uarts", or boot-time parameter
 	  8250.nr_uarts
 
+config  SERIAL_AST_DMA_UART
+        tristate "AST UART driver with DMA"
+        select SERIAL_CORE
+        help
+          UART driver with DMA support for Aspeed BMC AST25XX.
+          this driver supports UARTs in AST2500. It uses
+          DMA channel of DMA engines present in these chips.
+          since this dma engine is used only by UARTs it is not
+          added as a separate DMA driver instead added as a layer
+          within UART driver.
+
+config AST_UART_DMA_RX_INTERRUPT
+	bool "DMA interrupt of UART RX"
+	depends on SERIAL_AST_DMA_UART
+	default y
+	help
+	  This config  is Enabled by default,which means Rx part
+	  of UART is handled by DMA interrupt.
+	  if the version of chip AST2500 doesn't support
+	  DMA interrupt based RX,then Disable this option.Refer
+	  driver code to see how Rx is handled by timer,if Rx
+	  interrupt  is not available.
+
+
+config AST_NR_DMA_UARTS
+        int "Maximum number of uart dma serial ports"
+        depends on SERIAL_AST_DMA_UART
+        default "4"
+        help
+          Set this to the number of serial ports you want the driver
+          to support.  This includes any ports discovered via ACPI or
+          PCI enumeration and any ports that may be added at run-time
+          via hot-plug, or any ISA multi-port serial cards.
+
+config AST_RUNTIME_DMA_UARTS
+        int "Number of uart dma serial ports to register at runtime"
+        depends on SERIAL_AST_DMA_UART
+        range 0 AST_NR_DMA_UARTS
+        default "4"
+        help
+          Set this to the maximum number of serial ports you want
+          the kernel to register at boot time.
+
 config SERIAL_8250_EXTENDED
 	bool "Extended 8250/16550 serial driver options"
 	depends on SERIAL_8250
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 18751bc63a84..251f2e85efa1 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_SERIAL_8250_LPSS)		+= 8250_lpss.o
 obj-$(CONFIG_SERIAL_8250_MID)		+= 8250_mid.o
 obj-$(CONFIG_SERIAL_8250_MOXA)		+= 8250_moxa.o
 obj-$(CONFIG_SERIAL_8250_PXA)		+= 8250_pxa.o
+obj-$(CONFIG_SERIAL_AST_DMA_UART)	+= 8250_ast2500_uart_dma.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM)	+= 8250_of.o
 
 CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ