lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20190727111859.315994c3@collabora.com>
Date:   Sat, 27 Jul 2019 11:18:59 +0200
From:   Boris Brezillon <boris.brezillon@...labora.com>
To:     Qii Wang <qii.wang@...iatek.com>
Cc:     Rob Herring <robh@...nel.org>, <bbrezillon@...nel.org>,
        <matthias.bgg@...il.com>, <mark.rutland@....com>,
        <linux-i3c@...ts.infradead.org>, <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-mediatek@...ts.infradead.org>,
        <srv_heupstream@...iatek.com>, <leilk.liu@...iatek.com>,
        <liguo.zhang@...iatek.com>, <xinping.qian@...iatek.com>
Subject: Re: [PATCH v3 1/2] dt-bindings: i3c: Document MediaTek I3C master
 bindings

On Sat, 27 Jul 2019 09:23:33 +0800
Qii Wang <qii.wang@...iatek.com> wrote:

> On Wed, 2019-07-24 at 14:21 -0600, Rob Herring wrote:
> > On Tue, Jul 09, 2019 at 09:09:21PM +0800, Qii Wang wrote:  
> > > Document MediaTek I3C master DT bindings.
> > > 
> > > Signed-off-by: Qii Wang <qii.wang@...iatek.com>
> > > ---
> > >  .../devicetree/bindings/i3c/mtk,i3c-master.txt     |   48 ++++++++++++++++++++
> > >  1 file changed, 48 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
> > > 
> > > diff --git a/Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt b/Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
> > > new file mode 100644
> > > index 0000000..d32eda6
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/i3c/mtk,i3c-master.txt
> > > @@ -0,0 +1,48 @@
> > > +Bindings for MediaTek I3C master block
> > > +=====================================
> > > +
> > > +Required properties:
> > > +--------------------
> > > +- compatible: shall be "mediatek,i3c-master"  
> > 
> > Needs to be SoC specific.
> >   
> 
> We hope that the SOCs will use the same driver and try to avoid big
> changes. If there are inevitable changes in the future, then we will
> modify the compatible to be SoC specific. cdns,i3c-master.txt is not SoC
> specific either.

The cadence case is a bit different I think. When the driver was
developed there was no SoC integrating this IP. I guess Mediatek knows
already which SoC(s) will embed the I3C master block.

> 
> > > +- reg: physical base address of the controller and apdma base, length of
> > > +  memory mapped region.
> > > +- reg-names: shall be "main" for master controller and "dma" for apdma.
> > > +- interrupts: the interrupt line connected to this I3C master.
> > > +- clocks: shall reference the i3c and apdma clocks.
> > > +- clock-names: shall include "main" and "dma".
> > > +
> > > +Mandatory properties defined by the generic binding (see
> > > +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
> > > +
> > > +- #address-cells: shall be set to 3
> > > +- #size-cells: shall be set to 0
> > > +
> > > +Optional properties defined by the generic binding (see
> > > +Documentation/devicetree/bindings/i3c/i3c.txt for more details):
> > > +
> > > +- i2c-scl-hz
> > > +- i3c-scl-hz
> > > +
> > > +I3C device connected on the bus follow the generic description (see
> > > +Documentation/devicetree/bindings/i3c/i3c.txt for more details).
> > > +
> > > +Example:
> > > +
> > > +	i3c0: i3c@...0d000 {
> > > +		compatible = "mediatek,i3c-master";
> > > +		reg = <0x1100d000 0x1000>,
> > > +		      <0x11000300 0x80>;
> > > +		reg-names = "main", "dma";
> > > +		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
> > > +		clocks = <&infracfg CLK_INFRA_I3C0>,
> > > +			 <&infracfg CLK_INFRA_AP_DMA>;
> > > +		clock-names = "main", "dma";
> > > +		#address-cells = <3>;
> > > +		#size-cells = <0>;
> > > +		i2c-scl-hz = <100000>;
> > > +
> > > +		nunchuk: nunchuk@52 {
> > > +			compatible = "nintendo,nunchuk";
> > > +			reg = <0x52 0x0 0x10>;
> > > +		};
> > > +	};
> > > -- 
> > > 1.7.9.5
> > >   
> 
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ