linux-kernel - Re: [PATCH 3/6] pwm: sun4i: Add a quirk for bus clock

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sat, 27 Jul 2019 12:46:28 +0200
From:   Maxime Ripard <mripard@...nel.org>
To:     Jernej Skrabec <jernej.skrabec@...l.net>
Cc:     thierry.reding@...il.com, wens@...e.org, robh+dt@...nel.org,
        mark.rutland@....com, linux-pwm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: Re: [PATCH 3/6] pwm: sun4i: Add a quirk for bus clock

Hi,

On Fri, Jul 26, 2019 at 08:40:42PM +0200, Jernej Skrabec wrote:
> H6 PWM core needs bus clock to be enabled in order to work.
>
> Add a quirk for it.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@...l.net>
> ---
>  drivers/pwm/pwm-sun4i.c | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
>
> diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
> index 1b7be8fbde86..7d3ac3f2dc3f 100644
> --- a/drivers/pwm/pwm-sun4i.c
> +++ b/drivers/pwm/pwm-sun4i.c
> @@ -72,6 +72,7 @@ static const u32 prescaler_table[] = {
>  };
>
>  struct sun4i_pwm_data {
> +	bool has_bus_clock;
>  	bool has_prescaler_bypass;
>  	bool has_reset;
>  	unsigned int npwm;
> @@ -79,6 +80,7 @@ struct sun4i_pwm_data {
>
>  struct sun4i_pwm_chip {
>  	struct pwm_chip chip;
> +	struct clk *bus_clk;
>  	struct clk *clk;
>  	struct reset_control *rst;
>  	void __iomem *base;
> @@ -382,6 +384,16 @@ static int sun4i_pwm_probe(struct platform_device *pdev)
>  		reset_control_deassert(pwm->rst);
>  	}
>
> +	if (pwm->data->has_bus_clock) {
> +		pwm->bus_clk = devm_clk_get(&pdev->dev, "bus");
> +		if (IS_ERR(pwm->bus_clk)) {
> +			ret = PTR_ERR(pwm->bus_clk);
> +			goto err_bus;
> +		}
> +
> +		clk_prepare_enable(pwm->bus_clk);
> +	}
> +

The patch itself looks fine, but you should clarify which clock is
being used by the old driver.

My guess is that the "new" clock is actually the mod one, while the
old one was both the clock of the register interface (bus) and the
clock of the PWM generation logic (mod).

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com