linux-kernel - [PATCH 5.2 051/215] tty: serial: msm_serial: avoid system lockup condition

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190729190749.370988457@linuxfoundation.org>
Date:   Mon, 29 Jul 2019 21:20:47 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@...aro.org>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.2 051/215] tty: serial: msm_serial: avoid system lockup condition

[ Upstream commit ba3684f99f1b25d2a30b6956d02d339d7acb9799 ]

The function msm_wait_for_xmitr can be taken with interrupts
disabled. In order to avoid a potential system lockup - demonstrated
under stress testing conditions on SoC QCS404/5 - make sure we wait
for a bounded amount of time.

Tested on SoC QCS404.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@...aro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/tty/serial/msm_serial.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 23833ad952ba..3657a24913fc 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -383,10 +383,14 @@ static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
 
 static inline void msm_wait_for_xmitr(struct uart_port *port)
 {
+	unsigned int timeout = 500000;
+
 	while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) {
 		if (msm_read(port, UART_ISR) & UART_ISR_TX_READY)
 			break;
 		udelay(1);
+		if (!timeout--)
+			break;
 	}
 	msm_write(port, UART_CR_CMD_RESET_TX_READY, UART_CR);
 }
-- 
2.20.1