[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190729195226.8862-22-andrew.smirnov@gmail.com>
Date: Mon, 29 Jul 2019 12:52:23 -0700
From: Andrey Smirnov <andrew.smirnov@...il.com>
To: linux-serial@...r.kernel.org
Cc: Andrey Smirnov <andrew.smirnov@...il.com>,
Stefan Agner <stefan@...er.ch>,
Bhuvanchandra DV <bhuvanchandra.dv@...adex.com>,
Chris Healy <cphealy@...il.com>,
Cory Tusar <cory.tusar@....aero>,
Lucas Stach <l.stach@...gutronix.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>, linux-imx@....com,
linux-kernel@...r.kernel.org
Subject: [PATCH 21/24] tty: serial: fsl_lpuart: Introduce lpuart32_configure()
Code doing final steps of TX/RX configuration in lpuart32_startup()
and lpuart_resume() is identical, so move it into a standalone
subroutine.
Signed-off-by: Andrey Smirnov <andrew.smirnov@...il.com>
Cc: Stefan Agner <stefan@...er.ch>
Cc: Bhuvanchandra DV <bhuvanchandra.dv@...adex.com>
Cc: Chris Healy <cphealy@...il.com>
Cc: Cory Tusar <cory.tusar@....aero>
Cc: Lucas Stach <l.stach@...gutronix.de>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Jiri Slaby <jslaby@...e.com>
Cc: linux-imx@....com
Cc: linux-serial@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
---
drivers/tty/serial/fsl_lpuart.c | 48 +++++++++++++++------------------
1 file changed, 21 insertions(+), 27 deletions(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index bda01d23cea8..112fb1e19a1c 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1502,6 +1502,24 @@ static int lpuart_startup(struct uart_port *port)
return 0;
}
+static void lpuart32_configure(struct lpuart_port *sport)
+{
+ unsigned long temp;
+
+ if (sport->lpuart_dma_rx_use) {
+ /* RXWATER must be 0 */
+ temp = lpuart32_read(&sport->port, UARTWATER);
+ temp &= ~(UARTWATER_WATER_MASK << UARTWATER_RXWATER_OFF);
+ lpuart32_write(&sport->port, temp, UARTWATER);
+ }
+ temp = lpuart32_read(&sport->port, UARTCTRL);
+ if (!sport->lpuart_dma_rx_use)
+ temp |= UARTCTRL_RIE;
+ if (!sport->lpuart_dma_tx_use)
+ temp |= UARTCTRL_TIE;
+ lpuart32_write(&sport->port, temp, UARTCTRL);
+}
+
static int lpuart32_startup(struct uart_port *port)
{
struct lpuart_port *sport = container_of(port, struct lpuart_port, port);
@@ -1530,18 +1548,7 @@ static int lpuart32_startup(struct uart_port *port)
lpuart_rx_dma_startup(sport);
lpuart_tx_dma_startup(port);
- if (sport->lpuart_dma_rx_use) {
- /* RXWATER must be 0 */
- temp = lpuart32_read(&sport->port, UARTWATER);
- temp &= ~(UARTWATER_WATER_MASK << UARTWATER_RXWATER_OFF);
- lpuart32_write(&sport->port, temp, UARTWATER);
- }
- temp = lpuart32_read(&sport->port, UARTCTRL);
- if (!sport->lpuart_dma_rx_use)
- temp |= UARTCTRL_RIE;
- if (!sport->lpuart_dma_tx_use)
- temp |= UARTCTRL_TIE;
- lpuart32_write(&sport->port, temp, UARTCTRL);
+ lpuart32_configure(sport);
spin_unlock_irqrestore(&sport->port.lock, flags);
return 0;
@@ -2582,21 +2589,8 @@ static int lpuart_resume(struct device *dev)
lpuart_tx_dma_startup(sport);
- if (lpuart_is_32(sport)) {
- if (sport->lpuart_dma_rx_use) {
- /* RXWATER must be 0 */
- temp = lpuart32_read(&sport->port, UARTWATER);
- temp &= ~(UARTWATER_WATER_MASK <<
- UARTWATER_RXWATER_OFF);
- lpuart32_write(&sport->port, temp, UARTWATER);
- }
- temp = lpuart32_read(&sport->port, UARTCTRL);
- if (!sport->lpuart_dma_rx_use)
- temp |= UARTCTRL_RIE;
- if (!sport->lpuart_dma_tx_use)
- temp |= UARTCTRL_TIE;
- lpuart32_write(&sport->port, temp, UARTCTRL);
- }
+ if (lpuart_is_32(sport))
+ lpuart32_configure(sport);
uart_resume_port(&lpuart_reg, &sport->port);
--
2.21.0
Powered by blists - more mailing lists