[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1564385918.17211.6.camel@mhfsdcap03>
Date: Mon, 29 Jul 2019 15:38:38 +0800
From: Jianjun Wang <jianjun.wang@...iatek.com>
To: Bjorn Helgaas <bhelgaas@...gle.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Ryder Lee <ryder.lee@...iatek.com>
CC: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
<linux-pci@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <youlin.pei@...iatek.com>,
<jianjun.wang@...iatek.com>
Subject: Re: [v2,2/2] PCI: mediatek: Add controller support for MT7629
On Fri, 2019-06-28 at 15:34 +0800, Jianjun Wang wrote:
> MT7629 is an ARM platform SoC which has the same PCIe IP with MT7622.
>
> The HW default value of its Device ID is invalid, fix its Device ID to
> match the hardware implementation.
>
> Acked-by: Ryder Lee <ryder.lee@...iatek.com>
> Signed-off-by: Jianjun Wang <jianjun.wang@...iatek.com>
> ---
> drivers/pci/controller/pcie-mediatek.c | 18 ++++++++++++++++++
> include/linux/pci_ids.h | 1 +
> 2 files changed, 19 insertions(+)
>
> diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
> index 80601e1b939e..e5e6740b635d 100644
> --- a/drivers/pci/controller/pcie-mediatek.c
> +++ b/drivers/pci/controller/pcie-mediatek.c
> @@ -73,6 +73,7 @@
> #define PCIE_MSI_VECTOR 0x0c0
>
> #define PCIE_CONF_VEND_ID 0x100
> +#define PCIE_CONF_DEVICE_ID 0x102
> #define PCIE_CONF_CLASS_ID 0x106
>
> #define PCIE_INT_MASK 0x420
> @@ -141,12 +142,16 @@ struct mtk_pcie_port;
> /**
> * struct mtk_pcie_soc - differentiate between host generations
> * @need_fix_class_id: whether this host's class ID needed to be fixed or not
> + * @need_fix_device_id: whether this host's Device ID needed to be fixed or not
> + * @device_id: Device ID which this host need to be fixed
> * @ops: pointer to configuration access functions
> * @startup: pointer to controller setting functions
> * @setup_irq: pointer to initialize IRQ functions
> */
> struct mtk_pcie_soc {
> bool need_fix_class_id;
> + bool need_fix_device_id;
> + unsigned int device_id;
> struct pci_ops *ops;
> int (*startup)(struct mtk_pcie_port *port);
> int (*setup_irq)(struct mtk_pcie_port *port, struct device_node *node);
> @@ -696,6 +701,9 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
> writew(val, port->base + PCIE_CONF_CLASS_ID);
> }
>
> + if (soc->need_fix_device_id)
> + writew(soc->device_id, port->base + PCIE_CONF_DEVICE_ID);
> +
> /* 100ms timeout value should be enough for Gen1/2 training */
> err = readl_poll_timeout(port->base + PCIE_LINK_STATUS_V2, val,
> !!(val & PCIE_PORT_LINKUP_V2), 20,
> @@ -1216,11 +1224,21 @@ static const struct mtk_pcie_soc mtk_pcie_soc_mt7622 = {
> .setup_irq = mtk_pcie_setup_irq,
> };
>
> +static const struct mtk_pcie_soc mtk_pcie_soc_mt7629 = {
> + .need_fix_class_id = true,
> + .need_fix_device_id = true,
> + .device_id = PCI_DEVICE_ID_MEDIATEK_7629,
> + .ops = &mtk_pcie_ops_v2,
> + .startup = mtk_pcie_startup_port_v2,
> + .setup_irq = mtk_pcie_setup_irq,
> +};
> +
> static const struct of_device_id mtk_pcie_ids[] = {
> { .compatible = "mediatek,mt2701-pcie", .data = &mtk_pcie_soc_v1 },
> { .compatible = "mediatek,mt7623-pcie", .data = &mtk_pcie_soc_v1 },
> { .compatible = "mediatek,mt2712-pcie", .data = &mtk_pcie_soc_mt2712 },
> { .compatible = "mediatek,mt7622-pcie", .data = &mtk_pcie_soc_mt7622 },
> + { .compatible = "mediatek,mt7629-pcie", .data = &mtk_pcie_soc_mt7629 },
> {},
> };
>
> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
> index 70e86148cb1e..aa32962759b2 100644
> --- a/include/linux/pci_ids.h
> +++ b/include/linux/pci_ids.h
> @@ -2131,6 +2131,7 @@
> #define PCI_VENDOR_ID_MYRICOM 0x14c1
>
> #define PCI_VENDOR_ID_MEDIATEK 0x14c3
> +#define PCI_DEVICE_ID_MEDIATEK_7629 0x7629
>
> #define PCI_VENDOR_ID_TITAN 0x14D2
> #define PCI_DEVICE_ID_TITAN_010L 0x8001
Hi Bjorn & Lorenzo,
Is this patch ok or is there anything I need to fixed?
Thanks.
Powered by blists - more mailing lists