linux-kernel - Re: Failure to recreate virtual functions

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 29 Jul 2019 10:05:29 +0000
From:   Vlad Buslov <vladbu@...lanox.com>
To:     Lu Baolu <baolu.lu@...ux.intel.com>
CC:     Vlad Buslov <vladbu@...lanox.com>, Joerg Roedel <jroedel@...e.de>,
        Maor Gottlieb <maorg@...lanox.com>,
        Ran Rozenstein <ranro@...lanox.com>,
        "iommu@...ts.linux-foundation.org" <iommu@...ts.linux-foundation.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: Failure to recreate virtual functions


On Sat 27 Jul 2019 at 05:15, Lu Baolu <baolu.lu@...ux.intel.com> wrote:
> Hi Vilad,
>
> On 7/27/19 12:30 AM, Vlad Buslov wrote:
>> Hi Lu Baolu,
>>
>> Our mlx5 driver fails to recreate VFs when cmdline includes
>> "intel_iommu=on iommu=pt" after recent merge of patch set "iommu/vt-d:
>> Delegate DMA domain to generic iommu". I've bisected the failure to
>> patch b7297783c2bb ("iommu/vt-d: Remove duplicated code for device
>> hotplug"). Here is the dmesg log for following case: enable switchdev
>> mode, set number of VFs to 0, then set it back to any value
>>> 0.
>>
>> [  223.525282] mlx5_core 0000:81:00.0: E-Switch: E-Switch enable SRIOV: nvfs(2) mode (1)
>> [  223.562027] mlx5_core 0000:81:00.0: E-Switch: SRIOV enabled: active vports(3)
>> [  223.663766] pci 0000:81:00.2: [15b3:101a] type 00 class 0x020000
>> [  223.663864] pci 0000:81:00.2: enabling Extended Tags
>> [  223.665143] pci 0000:81:00.2: Adding to iommu group 52
>> [  223.665215] pci 0000:81:00.2: Using iommu direct mapping
>> [  223.665771] mlx5_core 0000:81:00.2: enabling device (0000 -> 0002)
>> [  223.665890] mlx5_core 0000:81:00.2: firmware version: 16.26.148
>> [  223.889908] mlx5_core 0000:81:00.2: Rate limit: 127 rates are supported, range: 0Mbps to 97656Mbps
>> [  223.896438] mlx5_core 0000:81:00.2: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [  223.896636] mlx5_core 0000:81:00.2: Assigned random MAC address 56:1f:95:e0:51:d6
>> [  224.012905] mlx5_core 0000:81:00.2 ens1f0v0: renamed from eth0
>> [  224.041651] pci 0000:81:00.3: [15b3:101a] type 00 class 0x020000
>> [  224.041711] pci 0000:81:00.3: enabling Extended Tags
>> [  224.043660] pci 0000:81:00.3: Adding to iommu group 53
>> [  224.043738] pci 0000:81:00.3: Using iommu direct mapping
>> [  224.044196] mlx5_core 0000:81:00.3: enabling device (0000 -> 0002)
>> [  224.044298] mlx5_core 0000:81:00.3: firmware version: 16.26.148
>> [  224.268099] mlx5_core 0000:81:00.3: Rate limit: 127 rates are supported, range: 0Mbps to 97656Mbps
>> [  224.274983] mlx5_core 0000:81:00.3: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [  224.275195] mlx5_core 0000:81:00.3: Assigned random MAC address a6:1e:56:0a:d9:f2
>> [  224.388359] mlx5_core 0000:81:00.3 ens1f0v1: renamed from eth0
>> [  236.325027] mlx5_core 0000:81:00.0: E-Switch: disable SRIOV: active vports(3) mode(1)
>> [  236.362766] mlx5_core 0000:81:00.0: E-Switch: E-Switch enable SRIOV: nvfs(2) mode (2)
>> [  237.290066] mlx5_core 0000:81:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [  237.350215] mlx5_core 0000:81:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [  237.373052] mlx5_core 0000:81:00.0 ens1f0: renamed from eth0
>> [  237.390768] mlx5_core 0000:81:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [  237.447846] ens1f0_0: renamed from eth0
>> [  237.460399] mlx5_core 0000:81:00.0: E-Switch: SRIOV enabled: active vports(3)
>> [  237.526880] ens1f0_1: renamed from eth1
>> [  248.953873] pci 0000:81:00.2: Removing from iommu group 52
>> [  248.954114] pci 0000:81:00.3: Removing from iommu group 53
>> [  249.960570] mlx5_core 0000:81:00.0: E-Switch: disable SRIOV: active vports(3) mode(2)
>> [  250.319135] mlx5_core 0000:81:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [  250.559431] mlx5_core 0000:81:00.0 ens1f0: renamed from eth0
>> [  258.819162] mlx5_core 0000:81:00.0: E-Switch: E-Switch enable SRIOV: nvfs(2) mode (1)
>> [  258.831625] mlx5_core 0000:81:00.0: E-Switch: SRIOV enabled: active vports(3)
>> [  258.936160] pci 0000:81:00.2: [15b3:101a] type 00 class 0x020000
>> [  258.936258] pci 0000:81:00.2: enabling Extended Tags
>> [  258.937438] pci 0000:81:00.2: Failed to add to iommu group 52: -16
>
> It seems that an EBUSY error returned from iommu_group_add_device(). Can
> you please hack some debug messages in iommu_group_add_device() so that
> we can know where the EBUSY returns?
>
> Best regards,
> Baolu

The error code is returned by __iommu_attach_device().

>
>
>> [  258.938053] mlx5_core 0000:81:00.2: enabling device (0000 -> 0002)
>> [  258.938196] mlx5_core 0000:81:00.2: firmware version: 16.26.148
>> [  258.938229] mlx5_core 0000:81:00.2: mlx5_function_setup:923:(pid 265): Failed initializing command interface, aborting
>> [  258.938315] mlx5_core 0000:81:00.2: init_one:1308:(pid 265): mlx5_load_one failed with error code -12
>> [  258.938540] mlx5_core: probe of 0000:81:00.2 failed with error -12
>> [  258.938597] pci 0000:81:00.3: [15b3:101a] type 00 class 0x020000
>> [  258.938657] pci 0000:81:00.3: enabling Extended Tags
>> [  258.939431] pci 0000:81:00.3: Failed to add to iommu group 52: -16
>> [  258.939928] mlx5_core 0000:81:00.3: enabling device (0000 -> 0002)
>> [  258.940039] mlx5_core 0000:81:00.3: firmware version: 16.26.148
>> [  258.940071] mlx5_core 0000:81:00.3: mlx5_function_setup:923:(pid 265): Failed initializing command interface, aborting
>> [  258.940158] mlx5_core 0000:81:00.3: init_one:1308:(pid 265): mlx5_load_one failed with error code -12
>> [  258.940400] mlx5_core: probe of 0000:81:00.3 failed with error -12
>>
>>
>> On previous patch 0e31a7266508 ("iommu/vt-d: Remove startup parameter
>> from device_def_domain_type()") in the series same sequence of actions
>> doesn't trigger any iommu errors:
>>
>> [  164.252254] mlx5_core 0000:81:00.0: E-Switch: E-Switch enable SRIOV: nvfs(2) mode (1)
>> [  164.288724] mlx5_core 0000:81:00.0: E-Switch: SRIOV enabled: active vports(3)
>> [  164.394839] pci 0000:81:00.2: [15b3:101a] type 00 class 0x020000
>> [  164.394938] pci 0000:81:00.2: enabling Extended Tags
>> [  164.396087] pci 0000:81:00.2: Adding to iommu group 52
>> [  164.396154] pci 0000:81:00.2: Using iommu direct mapping
>> [  164.396679] mlx5_core 0000:81:00.2: enabling device (0000 -> 0002)
>> [  164.396803] mlx5_core 0000:81:00.2: firmware version: 16.26.148
>> [  164.619320] mlx5_core 0000:81:00.2: Rate limit: 127 rates are supported, range: 0Mbps to 97656Mbps
>> [  164.625754] mlx5_core 0000:81:00.2: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [  164.625922] mlx5_core 0000:81:00.2: Assigned random MAC address 5e:1e:9b:ca:c8:e5
>> [  164.739694] mlx5_core 0000:81:00.2 ens1f0v0: renamed from eth0
>> [  164.774637] pci 0000:81:00.3: [15b3:101a] type 00 class 0x020000
>> [  164.774709] pci 0000:81:00.3: enabling Extended Tags
>> [  164.775816] pci 0000:81:00.3: Adding to iommu group 53
>> [  164.775886] pci 0000:81:00.3: Using iommu direct mapping
>> [  164.776610] mlx5_core 0000:81:00.3: enabling device (0000 -> 0002)
>> [  164.776734] mlx5_core 0000:81:00.3: firmware version: 16.26.148
>> [  164.999360] mlx5_core 0000:81:00.3: Rate limit: 127 rates are supported, range: 0Mbps to 97656Mbps
>> [  165.007118] mlx5_core 0000:81:00.3: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [  165.007327] mlx5_core 0000:81:00.3: Assigned random MAC address 82:4a:7a:5f:81:55
>> [  165.123927] mlx5_core 0000:81:00.3 ens1f0v1: renamed from eth0
>> [  172.063665] mlx5_core 0000:81:00.0: E-Switch: disable SRIOV: active vports(3) mode(1)
>> [  172.103306] mlx5_core 0000:81:00.0: E-Switch: E-Switch enable SRIOV: nvfs(2) mode (2)
>> [  173.033033] mlx5_core 0000:81:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [  173.091605] mlx5_core 0000:81:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [  173.129258] mlx5_core 0000:81:00.0 ens1f0: renamed from eth0
>> [  173.129863] mlx5_core 0000:81:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [  173.203879] mlx5_core 0000:81:00.0: E-Switch: SRIOV enabled: active vports(3)
>> [  173.204002] ens1f0_0: renamed from eth1
>> [  173.289454] ens1f0_1: renamed from eth0
>> [  186.720692] pci 0000:81:00.2: Removing from iommu group 52
>> [  186.720994] pci 0000:81:00.3: Removing from iommu group 53
>> [  187.771549] mlx5_core 0000:81:00.0: E-Switch: disable SRIOV: active vports(3) mode(2)
>> [  188.141758] mlx5_core 0000:81:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [  188.394072] mlx5_core 0000:81:00.0 ens1f0: renamed from eth0
>> [  191.116400] mlx5_core 0000:81:00.0: E-Switch: E-Switch enable SRIOV: nvfs(2) mode (1)
>> [  191.128965] mlx5_core 0000:81:00.0: E-Switch: SRIOV enabled: active vports(3)
>> [  191.235151] pci 0000:81:00.2: [15b3:101a] type 00 class 0x020000
>> [  191.235250] pci 0000:81:00.2: enabling Extended Tags
>> [  191.236463] pci 0000:81:00.2: Adding to iommu group 52
>> [  191.236531] pci 0000:81:00.2: Using iommu direct mapping
>> [  191.237037] mlx5_core 0000:81:00.2: enabling device (0000 -> 0002)
>> [  191.237161] mlx5_core 0000:81:00.2: firmware version: 16.26.148
>> [  191.457369] mlx5_core 0000:81:00.2: Rate limit: 127 rates are supported, range: 0Mbps to 97656Mbps
>> [  191.463355] mlx5_core 0000:81:00.2: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [  191.463509] mlx5_core 0000:81:00.2: Assigned random MAC address e6:f2:0c:b4:e3:2e
>> [  191.572884] mlx5_core 0000:81:00.2 ens1f0v0: renamed from eth0
>> [  191.608592] pci 0000:81:00.3: [15b3:101a] type 00 class 0x020000
>> [  191.608664] pci 0000:81:00.3: enabling Extended Tags
>> [  191.609434] pci 0000:81:00.3: Adding to iommu group 53
>> [  191.609466] pci 0000:81:00.3: Using iommu direct mapping
>> [  191.609760] mlx5_core 0000:81:00.3: enabling device (0000 -> 0002)
>> [  191.609862] mlx5_core 0000:81:00.3: firmware version: 16.26.148
>> [  191.826324] mlx5_core 0000:81:00.3: Rate limit: 127 rates are supported, range: 0Mbps to 97656Mbps
>> [  191.832558] mlx5_core 0000:81:00.3: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
>> [  191.832730] mlx5_core 0000:81:00.3: Assigned random MAC address a2:dc:76:30:18:6c
>> [  191.949625] mlx5_core 0000:81:00.3 ens1f0v1: renamed from eth0
>>
>> Thanks,
>> Vlad
>>