lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190729142316.21900-1-martin@kaiser.cx>
Date:   Mon, 29 Jul 2019 16:23:16 +0200
From:   Martin Kaiser <martin@...ser.cx>
To:     Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Shawn Guo <shawnguo@...nel.org>,
        Rob Herring <robh+dt@...nel.org>
Cc:     linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Martin Kaiser <martin@...ser.cx>
Subject: [PATCH] ARM: dts: imx25-pdk: native-mode is part of display-timings

Move the native-mode property inside the display-timings node.

According to
Documentation/devicetree/bindings/display/panel/display-timing.txt.
native-mode is a property of the display-timings node.

If it's located outside of display-timings, the native-mode setting is
ignored and the first display timing is used (which is a problem only if
someone adds another display timing).

Signed-off-by: Martin Kaiser <martin@...ser.cx>
---

Dear all,

I found this issue on a similar board when I tried to define two
variants that use different displays. I had two display timings and
ended up using the wrong one because native-mode was ignored outside of
display-timings.

Thanks for reviewing the patch,

   Martin

 arch/arm/boot/dts/imx25-pdk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index f8544a9e4633..05cccd12624c 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -76,8 +76,8 @@
 		bits-per-pixel = <16>;
 		fsl,pcr = <0xfa208b80>;
 		bus-width = <18>;
-		native-mode = <&wvga_timings>;
 		display-timings {
+			native-mode = <&wvga_timings>;
 			wvga_timings: 640x480 {
 				hactive = <640>;
 				vactive = <480>;
-- 
2.11.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ